Engineer Project
Resume:
Rolando Hilado
********@*********.***
Cover Letter
June 07, 2010
To Whom It May Concern:
I am seeking employment as an Instrumentation/ Control Systems Engineer, and respectfully submit my resume with the confidence that my experience, education and drive are well-suited to favorably benefit your company.
While my resume cannot adequately cover all my experience, for 25+ years, I have continuously developed my skills working in the design and engineering of instrumentation and control systems for the Oil Refining, Petrochemical and Oil/Gas Industries. This experience has allowed me to demonstrate an excellent technical knowledge, a professional attention to quality and detail, and a strong ability to deliver on-time and within budget. As a team player, my skills will blend with other professionals.
I am prepared for an immediate interview, and can provide you with additional information or references needed to proceed with my inquiry.
Thank you for your time and consideration. I look forward to a personal meeting with you.
Sincerely,
Rolando V. Hilado
Resume
Rolando Hilado
8326 Maple Acres Drive
Houston, Texas 77095
Tel#: 281-***-****
e-Mail: ********@*********.***
EMPLOYMENT HISTORY
Senior Engineer II
Control Systems
Bechtel Corporation
3000 Post Oak Blvd
Houston, Texas 77056
February 21, 2006
to August 28, 2009
1. Reliance Jamnagar Export Refinery Project (India): Clean Fuel Unit Developed 105 Level Setting Diagrams for all CFU sections; utilizing Intools software I prepared data sheets for all level instruments (194 Guided Wave Radar, 124 magnetic level gauges, 35 D/P level transmitters, 5 level gauge glass, 9 non-contact radar level transmitters, 9 bubbler level systems), 51 severe service control valves, 42 pressure regulators, 9 magnetic flowmeters, 5 V-cone flowmeters, 6 multi-stage orifice plates, 7 corrosion probes; initiated instrument data sheets for control valves, On/Off valves, Motor Operated Valves; assisted the Process Department in their Relief Valve Studies. Mentored 2 new college hires. The project utilized Foundation Fieldbus.
2. TPX Paraxylene Revamp Project (Thailand): Utilizing Intools software I prepared data sheets for instruments associated with Vendor Package Units of the TPX Project, with the assistance of one new college hire.. The major Package Units were Fired heaters, Turbine /Compressor, Marine jetty Loading Arms, Refrigeration Unit, Vapor Recovery Unit and Pumps. The various instruments which numbered about 1200 included control valves, Motor Operated Valves, On/Off valves, burner instruments (UV flame detectors, burner switches, ignition transformers, O2 analyzers), compressor/turbine instruments (bearing RTDs, vibration and speed probes, Bently Nevada 3300 machinery protection system), marine loading arms instruments (limit switches, panel hand switches and indicating lights, pendant boxes), RTDs and thermocouples, tubeskin thermocouples, flowmeters, level instruments and other package field instruments. The project utilized Foxboro Fox 1A.
3. ConocoPhillips WRR CORE Project (Illinois): Utilizing Intools software I prepared data sheets for 78 Motor Operated Valves (MOV), 130 On/Off valves and a number of control valves for the Coker Unit, Naphtha Hydrotreater Unit and the Flasher Unit. Prepared Technical Bid Evaluations for all Motor Operated Valves and On/Off valves. Participated in the Material Requisition activities for the MOVs and On/Off valves valves and reviewed all valve Vendor prints for specification compliance. The project utilized Honeywell TDC-3000.
4. QCLNG FEED Project (Australia): Utilizing Intools software, I prepared data sheets and technical bid evaluation for 256 On/Off ball valves and 175 butterfly valves; prepared data sheets for 40 severe service valves including compresssor anti-surge valves. I sized, prepared data sheets and Material Requisition (IFQ) for 57 Venturi tubes. The project utilized Honeywell TDC-3000 and Foundation Fieldbus.
Instrumentation Engineer
Linde Process Plants, Inc
.
6100 S Yale Suite 1200,
Tulsa, Oklahoma 74136
December 15, 2004
to February 18, 2006
1. BG37 Williams Energy Services TXP-5 Gas Plant Project (Opal, Wyoming): I prepared data sheets of instruments using Excel software such as shutdown valves, flowmeters, field transmitters and gauges. The project utilized Fisher-Rosemount Delta-V.
2. DN32 & DN35 BOC H2 Plant Projects (Salt Lake City, Utah & Lima, Ohio): I sized and prepared data sheets of control valves, relief valves, flowmeters and field instruments using Intools software. The project utilized Fisher-Rosemount Delta-V and Foundation Fieldbus.
3. DN30 Praxair H2 Plant Project
(Texas City, Texas): I sized and prepared data sheet of control valves, relief valves, flowmeters and field instrument using Excel software. The project utilized Fisher-Rosemount Delta-V and Foundation Fieldbus.
Principal Technical Professional - Control Systems
KBR
601 Jefferson Ave
Houston, Texas 77002
May 15, 2003
to November 15, 2003
1. ESSO-CHAD Oil/Water Separation Facility/Pipeline Project (Chad, Africa): Provided construction site technical support through problem solving and generated a summary of Vendor Packages instrument analog ranges, alarm and controller set points for DCS display.
2. ExxonMobil, LSM Oil Refinery Project (Joliet, Illinois): Provided construction site Quality Assurance/Control and Commissioning services to various instrumentation activities.
3. Lyondell Equistar NOX Project
(Houston, Texas): Reviewed miscellaneous Intools instrument data sheets, instrument Vendor drawings and documents.
4. ExxonMobil, Cerro Negro Oil Refinery Project (Venezuela): Revised technical standard and specifications for control valves, process stream analyzers and alarm systems.
Principal Technical Professional -Control Systems
KBR
601 Jefferson Ave
Houston, Texas 77002
March 10, 2000
to January 15, 2003
1. ExxonMobil Oil Refinery Project (Joliet, Illinois): Accountable for instrument bid evaluations, checking Intools instrument data sheets for inquiry and purchase issues, checking of Intools instrument index versus P &IDs, Vendor drawings and documents, thermowell vibration and level range calculations.
2. ESSO-CHAD Oil/Water Separation Facility/Pipeline Project (Chad, Africa): Developed 80 vessel sketches, generated Intools instrument data sheets for motor operated valves, on/off valves and level transmitters such as radar, ultrasonic, RF and DP.
3. Q- Chem Ethylene and Hexene Plants Project (Mesaieed Industrial City, Qatar): Developed vessel sketches, level range calculations, checked Intools instrument data sheets for DP level transmitters, glass and magnetic level gauges.
Instrumentation Engineer I
Technical Support Unit
Saudi Aramco Yanbu Oil Refinery (Domestic)
Al-Sinaiyah, Saudi Arabia
April 15, 1995
to March 15, 1999
1. Saudi Aramco Oil Refinery (Al-Sinaiyah, Saudi Arabia): Accountable for developing the Instrumentation Design Package for all in-house projects which included: P&ID development, budgetary cost estimate preparation, control valve, relief valve and flowmeter sizing, instrument specification, instrument loop diagrams and Construction Scope of Work documentation. Projects included: Process Fired Heaters Safety Upgrade, Flare Pilot Flame Detection Systems, MTBE Blend Gasoline Project, In-Line Fuel Oil Blend Project, In-Line LPG Blend Project, Relief Valve Authorization Program, Control Systems for Instrument Air Compressors and others.
Senior Control Systems Engineer
M. W. Kellogg Co
.
601 Jefferson Ave
Houston, Texas 77002
October 1994
to March 1995
1. SADAF, MTBE Plant Project (Jubail, Saudi Arabia): Accountable for sizing and specification of all flowmeters such as: orifice plates, venturi tubes, magmeters, turbine meters, annubars and ultrasonic flowmeters, specification of Honeywell Smart transmitters for level, pressure and temperature measurements. .
Senior Instrumentation Engineer II
Saudi Aramco
Tanajib, Saudi Arabia
May 1993
to October 1994
1. Offshore Gas/Oil Separation Plants (Tanajib, Saudi Arabia): Served as Commissioning Engineer for Aramcos Safaniya Producing Operation Engineering Commissioning Team for Zuluf 3 & Zuluf 4, Offshore Gas/Oil Separation Plants equipped with TDC-3000 and Triconex. Equipments were: 40-MW gas/oil fired turbine generators, production and test separators, shipping pumps, instrument air packages, fire & gas detection system, etc. The Team pre-commissioned/commissioned 900 DCS and 1100 local instrument loops per GOSP.
Senior Control Systems Engineer
M. W. Kellogg Co
.
601 Jefferson Ave
Houston, Texas 77002
May 1989
to May 1993
1. Texaco Chemical Company, Propylene Oxide/MTBE Plant
(Port Neches, Texas): Assigned as Area Lead Engineer for the
propylene oxide purification unit consisting of the following: five (5) columns for purifying propylene oxide product; and subsequently the epoxidation/fractionation unit consisting of four (4) columns and a vapor compressor, and the epoxidation unit consisting of isothermal and adiabatic reactors. Developed P&IDs, logic flowchart and logic diagrams/narratives. The project utilized Foxboro Fox 1A.
2. African Explosives and Chemicals Company Project (South Africa): Developed P&IDs for the Gasification Unit consisting
of three trains of fluidized bed gasifiers, coal and ash lockhoppers conveying system. Developed logic diagrams.
3. Shell Chemical Company, Ethylene Oxide/Ethylene Glycol Plant (Geismar, Louisiana): Prepared Analyzer Systems Scope Book which included specifications for seven (7) analyzer shelters and fifty (50) continuous analyzers of various sorts.
4. Shell International Chemie Maatschappij B.B. (SICM) Ethylene Plant (Cilacap, Indonesia): Assigned as Section Leader with
accountability for the preparation of Process Control Diagrams for the Propylene and Ethylene refrigeration units, pyrolysis
fractionation unit.
5. Hyundai Petrochemical Company, Ethylene Plant (Daesan, Korea): Served as Lead Engineer with accountability for the sizing and specification of 1200 control valves, On/Off valves and motor operated valves.
Senior Instrumentation Engineer
Bechtel Petroleum Operations
P.O. Box 127
Tupman, California 93276
April 1988
to April 1989
1. The U.S. Naval Petroleum Reserve No. 1 is a 68 square miles of oil field located in Elk Hills, California. It is equipped with compressor stations, gas plant, tank farms, tank settings and oil/gas separators, wells and etc. For the ongoing projects, I developed P&IDs; sized and prepared data sheets for control valves, relief valves, blanket gas manifolds, breather valves, emergency vents and flowmeters (orifice plates, turbine, PD meters); prepared material requisitions.
Senior Instrumentation Engineer
Ultrasystems, Inc
.
16845 Von Karman Ave.
Irvine, California 92714
August 1985
to September 1986
1. SDGE Moreno Station Addition Project, Gas Compressor Station (Riverside County, CA.): Addition of two(2) 3000-HP gas compressors. As Lead Engineer, I developed P&IDs; sized and prepared specification for the 24-inch flow orifice station metering/monitoring system; sized/prepared data sheets for control valves, On/Off valves, MOVs and field instruments; designed/specified two(2) control room instrument panels.
Senior Instrumentation Engineer
C,F. Braun Company
1000 S. Fremont Ave.
Alhambra, California 91802
November 1981
to March 19851. National Methanol Co
., Methanol Plant Project(Jubail, Saudi Arabia): Designed/specified two(2) analyzer shelters and twenty-four continuous analyzer systems; designed/specified six(6) local instrument panels and a 52-foot Main Control Room Board for Honeywell TDC-2000 instruments; generated loop diagrams.
2. Aramco Marjan Gas Onshore Plant Gathering Systems Project (Tanajib, Saudi Arabia): EPC of eight(8) gas compressors. I sized and prepared data sheets for relief valves and control valves; designed/specified eight(8) instrument local panels; generated loop diagrams; performed technical bid evaluation.
EDUCATION, PROFESSIONAL CERTIFICATION AND CERTIFICATES
Master of Science
: Chemical Engineering; the University of Southern California
Bachelor of Science
: Chemical Engineering; Mapua Institute of Technology, Philippines
Professional Engineer; Control Systems Engineer, License No. 4892, California
Engineer-In-Training; Certificate No. 47369, California
Certificate in Computer Programming
; Control Data Institute, California
TECHNICAL PAPER
ISA Paper #92-0398: Generalized Interpretation of Doppler Effect
Presented: International Conference and Exhibition of the Instrument Society of America; Houston, Texas
ADDITIONAL SKILLS
I am familiar with the requirements of work related technical standards: ANSI, ASME, API, AGA, ISA, ISO, NACE, IEC, NEMA.
Comments
Contact this candidate