Ziaur Rahman, MSc., EIT

***K Michener Park, Edmonton, AB T6H4N1

Phone: 780-***-**** email: abpgw0@r.postjobfree.com

Summary of Qualifications

Four years of experience in electrical design, engineering and support services of oil and gas as well as power

transmission/distribution and utility system.

Worked with modification/upgrading pertaining EPCM projects featuring on substation layout design, MCC, load

flow study, short circuit and voltage drop calculation.

Proficient with design of medium voltage single line diagrams, schematics, hazardous area classification

drawings, VFD/motor control schematics, cable and panel schedules and layouts, and wiring design.

Coordinated with contractors, vendors, and other project members on various projects and occasions. Executed

commissioning and start up activities. Excellent communication, supervisory and leadership skill.

APEGA member, EIT. Eligible for PEng.

Master of Science in Electrical Engineering from University of Arkansas, USA.

Knowledgeable with Canadian codes and standards such as CEC Part 1, NEC, OH&S, CSA, AECUC, IEEE etc.

Have experience in handling of code variances and technical deviations.

Proficient with MS Office, AutoCAD, and MicroStation. Knowledgeable with ETAP, SKM, CDEGS, SAP.

Experienced with mentoring; taught electrical engineering courses to undergraduate students at University of

Alberta. Excellent verbal and written skill pertaining distinctive graphical presentation ability.

Professional Experience

Electrical Engineer EIT, MR Engineering Ltd., Edmonton, Alberta, Canada (Part time) 2011 Present

MR Engineering is a consulting engineering company that provides structural and electrical engineering services.

Conducted survey using laser technology to accurately measure finished grade of residential lot.

Used ETAP for load flow and short circuit analysis, voltage drop, relay setting, grounding resistivity calculation.

Produced AutoCAD as-built drawing.

Research Assistant and Teaching Instructor at University of Alberta 2007 2012

Working at Laser plasma lab, University of Alberta

Developed process for writing submicron resolution three-dimensional structures using multi photon absorption on

various polymers. This process is being modeled by using MATLAB and C/C++.

Working on processes development for fabrication of multi-layer mirrors and targets for x-ray and laser.

Developed process for cleaning organic particles from silicon substrate using laser ablation.

Instructor of 40 engineering students in each semester in laboratory. Courses taught during this period:

EE 239 Fundamentals of Electrical Engineering

EE 340 Electronic Devices

Maintenance and Research Engineer at University of Missouri Columbia, USA 2005 2006

Developed and optimized various IC processes, helped graduate students with their projects, and was responsible

for installation, testing, and troubleshooting of vacuum systems and electromechanical assemblies.

Graduate Research Assistant High Density Electronic Center, Fayetteville, Arkansas, USA 2003 2005

Worked on process development for through silicon vias. This project was funded by US Defense and led to MSc in EE.

Electrical Engineer, Titas Natural Gas Field, BGFCL, Bangladesh 2002 2003

Bangladesh Gas Fields Company Limited (BGFCL) is the largest gas production company in Bangladesh, with 16 wells and

capacity of 475 MMSCFD, transporting gas to Bangladesh Oil, Gas and Mineral Corporation.

Project: Upgrading of an 11/6.6 KV Sub-Station and 6.6 KV MCC.

Designing of numerical relays to replace electromechanical relays.

Formulated conceptual designs of single line diagram for LV switchgear and distribution board.

Completed detail protection and relay setting for transformer, feeder line, HV/LV motors.

Coordinated with designers for grounding layout by CDEGS, lighting arrangement by Luxicon.

Provided start-up assistance by performing functional test, commissioning of electrical equipment.

Project: OSBL Pipe Rack Expansion.

Developed Scope of Work (SOW) for the extension of the existing pipe rack area, modularized with cable trays,

insulated pipes, and power and RTD connection boxes.

Prepared electrical layout of the new pipe rack area, designed LV single line diagram.

Performed load flow study of existing distribution system using ETAP and revised electrical layouts.

Prepared material take off (MTO), RFQ and RFP for 400V MCC, starters.

Ziaur Rahman Page 2 of 2

Project: Expansion and Renovation of the 33/11 KV and 11/0.4 KV existing Sub-Station.

Responsible for Engineering Work Packages (EWP) and commissioning, where the project received continued

patronage and contributed 20% increase in production capacity.

Prepared single lines, area classification, sub-station layout (MCC), grounding plans by CDEGS.

Prepared electrical datasheet cost estimate, MRP; managed inventory, procurement of spare part.

Reviewed design specification of control & protective relays, transformer, grounding resistance.

Operation and Maintenance Engineer, Telecom Malaysia International Ltd. Bangladesh 2002

Project: Operation of Maintenance of Ericsson BTS, RF network and power supply.

Executed site surveys for BTS and MW links. Analyzed traffic data and troubleshoot as necessary

Supervised BTS and MW link installation and commissioning. Designed single line diagram for BTS

power supply stations.

Drive test for BTS to verify desired coverage. Prepared BSS and MW link performance report.

Supervised BTS infrastructure work. Coordinated with the contractor company during the installation and

maintenance of new BTS site.

Industrial Internee (Electrical), Titas Natural Gas Field, BGFCL, Bangladesh 2001

Project: Power distribution design and load flow study of a 40KW generator.

Performed load flow study of LV/MV load, analyzed starting transient of 4KV, 80 HP compressor.

Prepared protection schematic for MV motors & LV load, MCC and VFD data sheet.

Industrial Internee (Electrical), Dhaka Electric Supply Corporation (DESCO), Bangladesh 2000

DESCO, with 2500 MW of installed capacity, is the authority responsible for planning, designing, construction, operation

and maintenance of power transmission and distribution in and around Dhaka Metropolitan city.

Project: Construction of a new 11/6.6 KV and 6.6/0.4 KV Distribution Sub-Station.

Responsible for designing and supporting calculations, load flow and short circuit study, switchgear selection of

sub-station, ensuring over-all pf 0.96 for 1 phase (230 V), 3 phase (400 V) supply.

Prepared single line, mark-up, interconnection diagram, EWD, CWD of 400/230 V power supply.

Acquainted and got trained with generator excitation, AVR, control and protective relays, transformer and

power cable sizing, voltage drop calculation, grounding, lighting, detailing SF6 GIS.

Developed technical specification for HV/LV motor, PLC, breaker, fuse, UPS, Battery Charger.

Familiarized with SCADA management reporting; conducted energy audit; coordinated shift.

Education

Graduate studies in Electrical Engineering, University of Alberta, Canada 2012

MSc. in Electrical Engineering, University of Arkansas, USA 2005

BSc. in Electrical and Electronic Engineering, Bangladesh Univ. of Eng. and Tech., Bangladesh 2002

Computer Skills

Electrical Engineering Software: Microstation, AutoCAD, ETAP, SKM, CDEGS, Luxicon 2.3, VHDL,

PSPICE, Mentor Graphics, Vision.

Programming Language: MATLAB, C/C++, Fortran, Assembly Language.

Software: MS Office Suite (Word, Excel, Access, PowerPoint, Visual Studio) UNIX, Linux, Database.

Professional Affiliation

EIT with APEGA since 2011 and eligible to be registered as a Professional Engineer immediately.

Member, Institution of Engineers, Bangladesh (IEB).

Student member, Institute of Electrical and Electronics Engineers (IEEE).

Additional Skills and Training

Canadian Electrical Code (CEC-Part 1), National Electrical Code (NEC), Alberta Electrical Utility Code.

Code for Electrical Installation at Oil & Gas Facilities, Alberta Occupational Health & Safety (OHS) Code.

Standard: CSA, ANSI, NFPA, NEMA, IEEE, IEC, ULC, CAN/CSA-B149.1-05, IEEE Std. 515-2004.

Workplace Hazardous Materials Information System (WHMIS) and Laboratory Safety, Univ. of Arkansas.

First Aid Training, ISO 9001:2000 Qlty. Cntrl., Proc., BGFCL; Risk Analysis Workshop, Univ. of Alberta.

References are available upon request.

Contact this candidate