Engineering Mechanical
Resume:
May ****
BIOGRAPHICAL DATA
Name: G.E. Otto Widera
Address (Office): College of Engineering
Marquette University
**** *. ********* ***. (53233)
P.O. Box 1881
Milwaukee, WI 53201-1881
414-***-**** / (FAX: 414-***-****)
E-mail: abp01b@r.postjobfree.com
(Home): 19440 Killarney Way
Brookfield, WI 53045
Position: Professor of Mechanical Engineering and Senior Scholar
College of Engineering
Co-Director, Center for Joining and Manufacturing Assembly
Citizenship: U.S.
Marital Status: Married, two children
EDUCATION
2
B.S. (1960), M.S. (1962), Ph.D. (1965, Engineering Mechanics)
University of Wisconsin, Madison
FELLOWSHIPS
Sept. 1961-May 1963 Graduate Fellow, University of Wisconsin, Madison
Summer, 1966 NASA Fellow in Space Systems Engineering, Stanford University
Sept. 1968-Aug. 1969 Alexander von Humboldt Research Fellow, Metalforming
Institute, University of Stuttgart, Germany
3
HONORS
Pressure Vessel and Piping Medal, ASME, 1995
American Society of Mechanical Engineers, Fellow, 1984
Board of Governors, American Society of Mechanical Engineers, 1981, 1982, 1991, 1992,
1993, 1996, (Citations)
Honorary Consultant, Second China Standards Committee for Pressure Vessels
Welding Research Council, 1995 (Citation)
Pressure Vessel and Piping Division, ASME, 1980, 1981, 1983, 1984, 1985, 1994,
(Citations)
Illinois Section, ASCE, 1977, (Citation)
U.S. National Academy of Science, 1972 (Award)
Tau Beta Pi, Eminent Engineer, 2000
Listed in Who s Who in America, American Men and Women in Science, Who s Who in
Engineering, Who s Who in the World, and others
American Society of Mechanical Engineers, Dedicated Service Award, 2009
PROFESSIONAL SOCIETY ACTIVITIES
American Society of Mechanical Engineers (Life Fellow)
Vice-President, 1993-96
Council on Engineering
-- Member, 1993-1996
-- Member, Board of Editors, 1982-1993
-- Member, Materials and Structures Group Board, 1990-1991, 1997
Chair, Materials and Structures Group Board, 1993-1996
-- Member, Technology Executives Conference Committee, 1993-1996
-- Member, Task Force on ASME's Involvement in Manufacturing, 1993-1994
4
-- Chair, Committee on Appointments, 1994-1996
-- Member, Administrative Committee, 1994-1996
Council on Codes and Standards
-- Member, Board of Pressure Technology Codes and Standards, 1988-1994,
2009-
Pressure Vessel and Piping Division
-- Chair, 1990-1991
-- Member, Design and Analysis Committee, 1972-1985.
-- Papers Review Chair, Design and Analysis Committee, 1977-1980
-- Chair, Design and Analysis Committee, 1980-1983
-- Member, General Committee, 1980-1991
-- Member, Executive Committee, 1985-1991
-- Program Chair, 1985-1989
-- Vice-Chair, 1989-1990
-- Historian, Senate, 1991-1992
-- Member, Honors Committee, 1992-1995
-- Member, Codes and Standards Technical Subcommittee, 1989-Present
-- President, Senate, 1992-1993
-- Member, Senate of Past Chairs, 1991-Present
Applied Mechanics Division
-- Chair, Junior Awards Committee, 1973-1976 (Committee nominee won
Pi Tau Sigma Gold Medal in 1974, 1975 and 1976)
Petroleum Division
-- Member, Materials Committee, 1988-1998
-- Member, Hydrocarbon Processing Committee, 1990-1998
5
Design Engineering Division
-- Member, Vibration and Sound Committee, 1971-1974
ASME Research Committee on Pressure Vessels
-- Chair, 1982-1987
Chicago Section
-- Chair, Machine Design Division, l967-1968
-- Member, Operating Board, l967-1973
-- Member, Executive Committee, 1970-1973
-- Editor, Newsletter, 1971-1973
University of Illinois, Chicago
-- Faculty Advisor, Student Section l966-1968, 1974-1975
(Years l966-1968, Student Section won award as Best in Midwest)
Council on Education
-- Member, Mechanical Engineering Department Heads Committee, 1983-91
-- ABET Visitor, 1992-1993
-- Board on Professional Development, Task Force on Local Course Delivery,
-- ABET Evaluator, 1993 Present
Milwaukee Section
-- Chair, Honors and Awards, 1992-1995
Society of Manufacturing Engineers (Life Member)
Wisconsin Association of Research Management
6
--President, 2004-2005
--Vice-President, 2003-2004
--Member, 1998 Present
--Member, Program Committee, 2003--Present
Wisconsin Center for Manufacturing Productivity
--Member, Board of Directors, 1993-1995
Wisconsin Manufacturing Curriculum Committee
Vice-Chair, 1998-2002
Wisconsin Manufacturing Extension Partnership - SE Region
--Member, 1992-1999
Pressure Vessel Research Council of Welding Research Council (Member)
-- Member, Design Division Executive Committee, 1987-2006
-- Member, Committee on Piping and Nozzles
-- Chair, Subcommittee on Shell Intersections, 1983-1987
-- Vice-Chair, Committee on Reinforced Openings and External Loads, 1984-1987
-- Chair, Committee on Reinforced Openings and External Loads, 1987-1991
-- Vice-Chair, Committee on Polymer Pressure Components, 1991-Present
-- Chair, Committee on Shells and Ligaments, 1993-1997
International Council on Pressure Vessel Technology (Member)
7
-- Chair, International Council, 1992-1996, 2003-2006
-- Chair, the Americas Regional Committee, 1988-Present
American Society of Civil Engineers
Illinois Section
-- Chair, Structural Division, 1976-1977
-- Chair, Structural Division Seminar Committee, 1978-1979
Engineering Mechanics Division
-- Member, Elasticity Committee, 1975-1984
Technical Council on Research
-- Chair, Peer Review Committee, 1983-1984
Research Council on Structural Plastics
-- Member, Administrative Committee, 1978-1995
-- Member, Design Guide Book Committee, 1978-1981
-- Member, Task Committee on Research and Development in
Structural Plastics
-- Member, Task Committee on Technology Transfer and Education in
Structural Plastics
Aerospace Division
-- Member, Aerospace Materials and Structures Committee, 1991-1995
American Society for Engineering Education (Member)
Illinois Society of Professional Engineers
8
-- Member, Education and Scholarship Committee, 1975-1977
French Pressure Vessel Association (Member)
Second China National Standards Committee on Pressure Vessels
-- Honorary Consultant
Metals Property Council
--Member, Board of Directors
Welding Research Council
--Member, Board of Directors
OTHER ACTIVITIES
Examiner
National Science Foundation
-- Member, Committee of Visitors, 1995 On-site Review of Materials Processing
And Manufacturing, and Manufacturing Machines and Equipment Programs
Reviewer
Many national and international journals, such as Manufacturing Review, Journal of
Engineering for Industry, Journal of Pressure Vessel Technology, Journal of Applied
Mechanics, International Journal of Solids and Structures, Journal of Engineering
Mechanics, Journal of Structural Mechanics, etc.; also, NSF proposals, conference papers,
books.
Conferences
9
Technical program chair for ASME 1984 Pressure Vessel and Piping Conference.
Organizer and Chair of numerous sessions at both national and international conferences.
Invited participant of IUTAM Symposia. Chair of organizing committee of 1990 International
Workshop on Nuclear Power Plant Safety and Life Extension.
Marquette University
University
-- Co-Director, Center for Joining and Manufacturing Assembly, 1995-Present
-- Director, Discovery Learning Center, 2002-2007
--Member, Faculty Senate, 2007 Present
Department of Mechanical Engineering
-- Chair, 1991-99
-- Chair, Executive Committee, 1991-99
-- Chair, Freshman Committee, 1997-98
College of Engineering
-- Interim Dean, 1998-99, 2003
-- Senior Associate Dean, 1999 -2007
-- Member, Administrative Council, 1991-2007
-- Chair, Mechanics Committee, 1993-2001
-- Member, Facilities Committee, 1994-98
-- Supervisor, Mechanical Staff, 1992-2001
-- Supervisor, Computing Staff, 1999 2007
-- Director, Discovery Learning Center, 2002-2007
Graduate School
-- Member, Graduate Studies Board, 1992-97, 2009-
-- Co-Developer and Director, Engineering Management Program, 1995-2001
10
University of Illinois at Chicago
Department of Materials Engineering
-- Elected Member of Advisory Committee for twelve years; also served on
numerous other committees, such as Accreditation Committee
-- Seminar Chair, 1977-1979
-- Coordinator (unofficial), Mechanical Analysis and Design Program, 1978-1982
Department of Mechanical Engineering
-- Acting Head, 1982-1983
-- Head, 1983-1991
Department of Industrial and Systems Engineering
-- Acting Head, 1985-1986
College of Engineering
-- Member of Executive Committee, 1967-1978, 1979-1980; also served
on many other College Committees, such as Curriculum, etc.
-- Director, Off-Campus Programs, 1987-1988
University Senate
-- Member, Campus Planning and Nominations Committees,
1976-1977, 1980-1982, 1985
-- Member, Faculty Judiciary Committee, 1975-1976
-- Member, Executive Committee, 1985-1987
Graduate College
-- Member, Executive Committee, 1970-1972
-- Chair, Natural Science Area Subcommittee, 1971-1972
11
Campus Research Board
-- Member, 1972-1973, 1975-1977
-- Member, Biomedical Research Sub-Committee, 1976-1977
University
-- Member, University Search Committee for Vice-Chancellor for Research
And Dean of Graduate College, 1985
-- Member, All Campus Committee on Promotion and Tenure, 1975-1976
-- Member, Committee on International Education, 1972-1973
-- Member, Advisory Board of SofTech (Software Technologies Research
Center), 1989-1991
-- Member, Campus-wide Information Management Advisory Committee,
1990-1991
School of Urban Sciences
-- Member, Promotion and Tenure Committee, 1978
College of Liberal Arts and Sciences
-- Member, Search Committee for Head of Department of Mathematics, 1980
Honors College
-- Member, Search Committee for Dean, 1981-1982
-- Fellow
College of Dentistry
-- Member, Search Committee for Dean, 1988-1989
TEACHING
Variety of courses on both the undergraduate and graduate levels; includes such courses
as Statics, Dynamics, Strength of Materials, Advanced Dynamics, Shells, Vibrations, Noise
12
Control, Mechanics of Metalforming, Mechanics of Composite Materials, Applied Stress
Analysis, Structural Analysis, Plates, Energy Methods, Design Use of Materials.
EXTERNAL PH.D. EXAMINER
Universities in Canada, India, Bahrain
RESEARCH INTERESTS
-- Application of Mechanics in Manufacturing Processes
-- Stress Analysis (incl. FEM)
-- Pressure Vessels
-- Plate and Shell Structures
-- Composite Materials
RESEARCH SUPPORT
Holder of grants from NSF, NIH-NIDR, McDonnell Douglas Automation Co., NIST, Welding
Research Council, CAI Inc., IBM, Manufacturing Research Center, Illinois Department of
Commerce and Community Affairs (Challenge Grant), Rush-Presbyterian St. Luke's Medical
Center, Sargent and Lundy Engineers, Syncrude Inc., Drisco Pipe, Pressure Vessel
Research Council. Tower Automotive, MECHSys
GRADUATE STUDENT THESIS ADVISING
Masters Degree Students
Cunjiang Cheng, thesis, 2003
Zhizhong Wei, 2000
Nathaniel Beuse, thesis, 1997
Joseph Hamiss, essay, 1998
Douglas Kiesling, thesis, 2003
13
Sanjay Gurbuxani, 1997
David Kurzynski, 1997
R. Christian Bartley, (Co-advisor), Essay, 1997
Jiao Shi, Essay, 1996
Pavan Chada, Essay, 1996
Dijo T. Alex, Thesis, 1993
Wenchun Zheng, Thesis, 1992
Brad Trago, Essay, 1991
Ximmin Xu, Essay, 1991
Jeffrey Petsinger, Essay, 1991
Ying Gao, Essay, 1990
Kerry M. Peters, Essay, 1990
Mary Ling, (Co-advisor), Thesis, 1989
Marion J. Menzo, Thesis, 1989
John M. Kremer, Thesis, 1987
John Smuzer, Essay, 1987
Joseph A. Zurawski, Essay, 1986
Michael L. Charlier, Essay, 1986
Khairulbashar Siddiqui, M.S. Project, 1986
T. Parthasarathi, Essay, 1985
Narendar K. Madan, Essay, 1983
Doctoral Degree Students
Carl Cheng, Dissertation, 2007
Liping Xue, Dissertation, 2006
Ademar Galelli, Dissertation, 2002
Dragomir Marinkovich, Dissertation, 2006
William Howard, Dissertation, 2001
Thomas James, Dissertation, 2003
Claudio Pinheiro, Dissertation, (in progress)
14
Linping Zhao, Dissertation, 2003
Paulo Barcellos, (Co-advisor), Dissertation, 1998
Luis A. Borges, (Co-advisor), Dissertation, 1997
Jyuhn-Hurng Ke, (Co-advisor), Dissertation, 1993
Payman Afshari, Dissertation, 1992
Nader Afshar, (Co-advisor), Dissertation, 1991
John M. Kremer, (Co-advisor), Dissertation, 1991
Owen D. Schipplein, Dissertation, 1990
Misoum Moumene, Dissertation, 1989
Hui Fan, Dissertation, 1989
Radi Teleb, (Co-advisor), Dissertation, 1989
Elsayed M. Bakr, Dissertation, 1986
Daryl L. Logan, Dissertation, 1977
Suk Wha Chung, Dissertation, 1973
Jay S. Lan, Dissertation, 1969
EDITORSHIPS
-- Editor, Journal of Pressure Vessel Technology (Transactions of ASME),
1982-1993, 2005-Present
-- Co-Editor, Handbook of Metalforming, McGraw-Hill, New York, 1985; SME, 1995
-- Associate Editor, Manufacturing Review, 1991-1995
-- Associate Editor, Journal of Pressure Vessel Technology (Transactions of ASME),
1977-1981, 2003-2005
-- Associate Editor, Applied Mechanics Reviews, 1987-1994
-- Member, Editorial Advisory Board, The open Ocean Engineering Journal, 2007-Present
-- Board of Editors, Pressure Vessels and Piping--Design Technology
(1982-- A Decade of Pressure), ASME, 1982
-- Editor, Innovations in Structural Engineering, ASCE Chicago, 1974
15
-- Editor, Pressure Vessel Design, Special Publication PVP-57, ASME, 1982
-- Contributing Editor: Fracture, Fatigue and Advanced Mechanics, Special
Publication, PVP 98-8, ASME, 1985
-- Member of Task Committee on Design of Structural Plastics Research Council
which prepared Structural Plastics Design Manual, Vol. 63, ASCE, 1984
-- Co-Editor, Design and Analysis of Plates and Shells, Special Publication
PVP-105, ASME, 1986
-- Co-Editor, Composites and Other New Materials for PVP: Design and Analysis
Considerations, Special Publication PVP Vol. 174, ASME, 1989
-- Coordinating Editor, Design and Analysis of Piping and Components,
Special Publication PVP Vol. 169, ASME, 1989
-- Coordinating Editor, Design and Analysis of Pressure Vessels and Components,
Special Publication PVP Vol. 175, ASME, 1989
-- Coordinating Editor, Weld Residual Stresses and Plastic Deformation,
Special Publication PVP Vol. 173, ASME, 1989
-- Editor, Optimum Structural Design, Special Publication PVP-89-36, ASME, 1989
-- Member, Editorial Advisory Board, Acta Mechanica Sinica, 1989-Present
EMPLOYMENT
9/60 - 6/65
Engineering Mechanics Department, University of Wisconsin M.S. (Engineering Mechanics),
1982, Ph.D. (Engineering Mechanics), 1965. See Publications for thesis titles. Instructor,
1963-65, taught Statics, Dynamics and Strength of Materials courses. Organized graduate
student seminar series.
16
9/65 - 8/69
University of Illinois at Chicago Circle. Assistant Professor of Engineering Mechanics in
Materials Engineering Department. Helped develop undergraduate and graduate program in
Mechanical Analysis and Design; principal investigator of NSF grant to devise asymptotic
theories for the vibration of shells; faculty advisor for student ASME section -- won Best
in the Midwest Award two years in a row.
9/68 - 8/69
University of Stuttgart (TH), Germany, Gast Dozent and Alexander von Humboldt Fellow.
Worked at the Institute for Metalforming; performed research on high velocity impact
hammer and participated in the development of a new analytical technique for the
description of large plastic flow problems.
9/69 - 8/73
University of Illinois at Chicago Circle. Associate Professor, in Materials Engineering
Department. Developed courses in Plates, Shells, and Metalforming Mechanics for
graduate program; supervised Ph.D. thesis work in areas of shells and metalforming;
developed asymptotic theories for anisotropic, nonhomogeneous plates.
9/73 - 4/82
University of Illinois at Chicago Circle. Professor of Engineering Mechanics in Materials
Engineering Department. Developed courses dealing with Noise and Vibration Control,
Mechanics of Composite Materials and Applied Stress Analysis; set up a new Noise Control
Laboratory; Coordinator for graduate and undergraduate program in Mechanical Design.
Developed asymptotic theories for composite shells, laminated pressure vessels.
4/82 - 8/91
University of Illinois at Chicago. Professor and Acting Head, Mechanical Engineering
Department, 4/82 - 4/83. Professor and Head, 4/83 - 8/91. Responsible for
17
organization of new Mechanical Engineering Department created as a result of
reorganization of College; oversaw growth of faculty from 12 to 28; undergraduate student
body was 550 at time of departure, 225 graduate students; supervised merger of
Industrial Engineering with Mechanical Engineering, in 1986, with Manufacturing
Engineering becoming a major emphasis in the Department. Also, oversaw move of
Department into the New Engineering Research Facility thereby doubling its laboratory
space.
7/87 - 9/88
University of Illinois at Chicago. Director of Off-Campus Engineering Programs.
Responsible for all aspects of video-based MS programs given at five public as well as
several industrial sites.
8/91 - 61/98
Marquette University. Professor and Chair, Mechanical and Industrial Engineering
Department. Responsible for two ABET accredited undergraduate and three graduate
programs. Co-director of Masters Program in Engineering Management.
7/98 - 6/99, 1/03 7/03
Marquette University. Interim Dean, College of Engineering. Responsible for Academic
Programs (6UG, 8 Grad), Strategic Planning, Financial Management, Research Stimulation,
Personnel, Advancement Activities, Alumni Relations and Outreach to Community.
Development Capital Campaign Priorities for College.
7/99 - 11/99
Marquette University. Professor and Chair, Mechanical and Industrial Engineering
Department.
12/99 - 8/07
18
Marquette University. Senior Associate Dean of College of Engineering. Responsible
for Academic Program Development, Academic Goals, Budget Development, Centers,
Physical Plant, Grants and Contracts, Quality Measures, Faculty and Staff Hiring Oversight.
Co-Director of Center of Joining and Manufacturing Assembly.
7/02 8/07
Marquette University. Director, Discovery Learning Center.
8/07 Present
Marquette University. Professor, Mechanical Engineering Department.
Part-Time Work and Major Consulting Efforts:
Summer 1960
Ladish Company, Cudahy, WI. Engineer.
Designed a valve testing bench for Triclover Division and experimental high velocity impact
hammer that was used in study of hard to forge materials.
Summer 1965
Ladish Company, Cudahy, WI. Stress Analyst.
Performed stress analysis of large multi-station mechanical press as well as
failure analysis of upper ram of largest counterblow forging hammer in the world.
Summer l967
National Science Foundation, Assistant Director of Engineering Case Study Institute held
in Chicago. Set up case studies at various area companies and demonstrated use of case
studies in classroom environment. CB&I case study emphasized code analysis and design.
9/67 - 76
19
Ladish Company, Cudahy, WI. Consultant.
Performed stress analysis of forging hammers and presses. Set up noise measurement
procedure to check compliance with OSHA standards, carried out noise control studies on
forging industry sponsored study of Noise Control in Forge Shop.
Summer l968
Argonne National Laboratory, Argonne, IL. Visiting Scientist in Materials Science Division.
Performed study of creep of nuclear fuel elements and cladding materials.
3/70 - 10/88
Sargent and Lundy Engineers, Chicago, IL. Co. Consultant to Engineering Mechanics
Division. Participated in numerous special studies involving the static and dynamic
analysis of nuclear power plant components. Examples are simplified analysis procedures
to check ASME BPV Code compliance, fracture mechanics analysis procedures, procedures
for the analysis of buried piping systems, etc.
7/72 - 75
Howmedica, Inc., Chicago, IL. Consultant.
Performed stress analysis studies of various dental implant designs. Carried out basic
studies involving the interaction of teeth, periodontal membrane and bone which were
published in journals and conference proceedings.
9/73 - 6/74
University of Wisconsin, Milwaukee, WI. Visiting Professor.
Carried out analytical and numerical studies of large plastic flow occurring in several
forging operations, such as Westinghouse steam chests and large rolled rings.
11/77 - 81
National Can Co., Chicago, IL. Consultant.
Carried out studies involving the stress analysis and buckling of beer cans with
the aim of reducing wall thickness of sides and domed bottom of can.
20
12/78 - 3/79
Marquette University, Milwaukee, WI. Visiting Professor.
Developed analysis procedures applicable to laminated pressure vessels.
7/81 - 10/81
National Bureau of Standards, Washington, DC. Consultant to Polymer Science Division.
Developed analysis procedures to compliment test procedures of porcelain veneered metal
alloy systems.
9/65 - Present
Also, short term Consultant to various companies.
PUBLICATIONS
Theses:
Energy Studies of Multi-Piece Masses Under Impact, M.S. Thesis,
University of Wisconsin, 1962
A Boundary Layer Theory for the Axisymmetric Vibrations of Circular Cylindrical
Elastic Shells, Ph.D. Thesis, University of Wisconsin, 1965
Papers:
l. "On a Problem of the Theory of Elasticity for a Circular Cylinder of Finite Length,"
Proc. Eleventh Cong. Theo. Appl. Mech., Coimbatore (India), 1966 (with S. Mirza).
2. "Elastostatic Problem of a Solid Prism Subjected to a Functional Load,"
Proc. Twelfth Cong. Theo. Appl. Mech., New Delhi, 1967 (with S. Mirza).
3. "On the Propagation of Waves of Small Wavelength in Orthotropic Cylindrical Shells,
Invited Address, Proc. Twelfth Cong. Theo. Appl. Mech., New Delhi, 1967.
J. Engineering
4. "A Boundary Layer Theory for the End Problem of a Circular Cylinder,"
Mathematics, Vol. 2, 1968, p. 343 (with C.H. Wu).
21
"On The Dynamic Theory of Anisotropic Cylindrical Shells, Proceeding Sixth International.
5.
Cong. Acoustics, Japan, 1968, Vol. G, p. 25.
"Clamped Annular Plate under a Concentrated Force", AIAA J., Vol. 7, 1969, p. 151
6.
(with R. Amon).
Ingenieur-Archiv, Vol. 38,
7. "An Asymptotic Theory for the Vibration of Anisotropic Plates,"
1969, p. 46.
8. "An Asymptotic Theory for the Moderately Large Deflections of Anisotropic Plates,"
J. Engineering Mathematics, Vol. 3, 1969, p. 239.
9. "Vergleich des dynamischen Verhaltens von ein-und mehrteiligen Schabotten bein
Stauchen," Umformtechnik (Ind.- Anz.), Vol. 91, 1969, p., 659.
"An Asymptotic Theory for the Vibration of Cylindrical Shells," Studies in Applied
10.
Mathematics, Vol. 48, 1969, p. 205 (with M.W. Johnson).
11. "Bending by a Concentrated Force of an Infinite Plate Reinforced by a Circular Beam,"
Proc. Second Canadian Cong. Appl. Mech., Waterloo, 1969, p. 279 (with R. Amon, P.
Panicali).
"Nonlinear Rheological Models for Creep," Proc. Second Canadian Cong. Appl. Mech.,
12.
Waterloo, 1969, p. 69 (with S. Mirza).
13. "Note on Higher Derivatives for Problems Involving a Singular Solution",
Int. J. Theoretical Physics, Vol. 17, 1969, p. 119 (with R. Amon).
"Stability of a Thick Rubber Solid Subjected to Pressure Load", Int. J. Solids
14.
& Structures, Vol. 5, l969, p. 1107 (with C.H. Wu).
"An Asymptotic Theory for the Motion of Elastic Plates", Acta Mechanica,
15.
Vol. 9, 1970, p. 54.
16. On the Problem of the Annular Plate, Simply Supported and Loaded with an Eccentric
Concentrated Force", AIAA J., Vol. 8, 1970, p. 961 (with R. Ahrens, R. Amon).
17. "Asymptotic Theories for the Unsymmetric vibrations of Cylindrical Shells, Part I -
Derivations", J. Applied Mathematics and Physics (ZAMP), Vol. 21, 1970, p. 394.
18. "Asymptotic Theories for the Unsymmetric Vibrations of Cylindrical Shells, Part II -
Application", J. Applied Mathematics and Physics (ZAMP), Vol. 21, 1970, p. 397
19. "On the Problem of the Indefinite Elastic Plate with a Circular Insert Reinforced by a
J. Nuclear Engineering and Design, Vol. 12, 1970, P. 475 (with P. Panicali,
Beam",
R. Amon).
22
"Vibration of Beam - Reinforced Circular Plate", J. Sound and Vibration, Vol. 12, 1970,
20.
p. 475 (with R. Amon).
21. "An Asymptotic Theory for the Large Deflections of Inhomogeneous Plates",
Revue de Mecanique Applique, Vol. 15, No. 3, 1970, p. 579.
"Infinite Plate with a Supported Reinforced Circular Hole", Developments in Theoretical and
22.
Applied Mechanics, Raleigh, North Carolina, 1970, Vol. 5, p. 503 (with R. Amon).
"On the Vibration of Beam-Reinforced Circular Plate Type Elements", Invited Paper, Proc.
23.
Sixth Conf. on the Dynamics of Machines, Bratislava, 1970, Vol. 1, p. 84 (with R. Amon).
24. "An Asymptotic Theory for the Vibrations of Rotationally Symmetric Shells",
Proc. Gesell shaft fuer Angewandte Mathematik und Mechanik, Aachen, 1969;
J. Appl. Math Mech. (ZAMM), Vol. 50, 1970, p. 251.
"Three-Dimensional Photoelastic Study of an Anchor Block", 1970 Fall Meeting of the
25.
Society of Experimental Stress Analysis, Boston; available as Paper No. 1529, SESA,
Westport, Connecticut (with S. Mirza).
"Stress Concentration in a Beam-Reinforced Perforated Sheet", Proc. Third Canadian
26.
Cong. Appl. Mech., Calgary, 1971, p. 145 (with R. Amon, J. Snell).
"Green's Function of an Edge-Beam Reinforced Circular Plate", Proc. Third Canadian
27.
Cong. Appl. Mech., Calgary, 1971, p. 275 (with R. Amon, S. Angel).
"Einige grundlegende Uerberlegungen zum Schmiedevorgang", Umformtechnik (Ind.-
28.
Anz.), Vol. 92, 1971, p. 2451.
"Stability of an Edge-Reinforced Circular Plate", J. of Engineering Mechanics Div., ASCE,
29.
Vol. 97, 1971, EM5, p. 1597 (with R. Amon).
"An Approximate Nonlinear Dynamic Theory for Orthotropic Plates", J. Engineering
30.
Mathematics, Vol. 5, 1971, p. 99.
31. "Reduction in Stress Concentration due to Beam Reinforced of a Circular Hold in a Sheet",
J. Nuclear Engineering and Design, Vol. 16, 1971, p. 279 (with J. Snell, R. Amon).
32. "Uerberlegungen zum Erfassen der Schabotteschingungen beim Schmieden",
Umformtechnik (Ind.-Anz.), Vol. 93, 1971, p. 210 (with H.J. Metzler).
33. "On Bessel Functions of Imaginary Order and their Occurrence in Plate Theory",
Proc. of the Fourth Balkan Math. Cong., Istanbul, 1971, p. 186 (with R. Amon).
"An Asymptotic Theory for the Vibration of Nonhomogeneous Plates", Acta Mecanica, Vol.
34.
12, 1971, p. 131 (with M.W. Johnson).
23
35. "Formulation and Solution of a Nonhomogeneous, Anisotropic Cylindrical Shell Problems",
Proc. First Int. Conf. on Structural Mech. in Reactor Tech., Berlin, Vol. 5 - Part J, 1971,
p. 91 (with S.W. Chung).
"Deflection of an Orthotropic Piston", J. Composite Materials, Vol. 6, 1972, p. 167-172
36.
(with R. Amon).
"Elastic Instability of Edge-Reinforced Annular Plates", Proc. First Int. Conf. on Structural
37.
Mech. in Reactor Tech., Berlin, Vol. 3 - Part F, 1971, p. 205 (with R. Amon).
"A Theory for Nonhomogeneous Anisotropic Cylindrical Shells", J. Composite Materials,
38.
Vol. 6, 1972, p. 14 (with S.W. Chung).
"Application of Fracture Mechanics to Nuclear Piping Systems", International Journal of
39.
Engineering Fracture Mechanics, 1972 (with W. Senchak).
"The Fixed Edge Problem in Elasticity Theory, Plates, and Shells", Proceedings of Fourth
40.
Canadian Cong. Appl. Mech., Montreal, 1973, p. 55 (with R.H. Bryant).
"Nonhomogeneous Anisotropic Shell Theories", Proc. 15th Polish Solid Mechanics Conf.,
41.
Zakopane, 1973, p. 263.
42. "Stress Distribution in Bone Arising From Loading on End steal Implants", J. Biomedical
Materials Research #4, Vol. 7, No. 3, 1973 (with J.A. Tesk).
Proceedings of Second
43. "Shell Analysis through Use of Asymptotic Theories",
Intern l. Conf. on Structural Mech. in Reactor Tech., Berlin, Vol. 3 - Part G-H, 1973.
44. "Solution of a Class of Plane Elasticity Problems by Use of Parametric Expansion",
Mecanique Applique, Vol. 18, 1973, p. 885 (with R.H. Bryant).
45. "Ein Beitrag zur Analyse der versteiften Kreisringplatte", ZAMM, Vol. 54, 1974,
p. 107 (with E. Frank).
46. "Applicability of Various Nonhomogeneous Anisotropic Shell Theories in Pressure Vessel
Design", Proc. Second Int. Conf. on Structural Mech. in Reactor Tech., Berlin, Vol. 3 -
Part G1/7, 1973 (with S.W. Chung).
"Some Factors Affecting Dental Impact Design", J. of Biomedical Materials Research
47.
Symposium, No. 6, 1975, p. 251 (with E. Privitzer, J.A. Tesk).
48. "Derivation of Various Nonhomogeneous Anisotropic Shell Theories Applicable
in Pressure Vessel Design", Nuclear Engr. and Design, Vol. 31, 1974, p. 405
(with S. Chung).
"Validity of Shell Theory for Layered Media", Proc. Third Int. Conf. Structural Mech.
49.
24
in Reactor Tech., London, 1975, Paper M3/10 (with D. Logan).
50. "The Analysis of Locally Reinforced Holes and Transition Regions in Thin-Walled Structural
Members", Proc. Third Int. Conf. Structural Mech. in Reactor Tech., London, 1975, Paper
F7/8 (with R. Amon, G.T. Kitz, J. Doyle).
51. "Interaction Effects among Cortical Bone, Cancellous Bone and Periodontal Membrane of
Natural Teeth and Implants", J. of Biomedical Materials Research Symposium No. 7,
1976, p. 613 (with J.A. Tesk, E. Privitzer).
52. "On the Analysis of Nonhomogeneous Shells", Army Symposium on Solid Mechanics,
on Design, AMMRC,
1976--Composite Materials: The Influence of Mechanics of Failure
MS 76-3, 1976 (with D. Logan).
"On the Problem of the bonded Circular Rod under Axial Loading", Proceeding Twelfth
53.
Meeting of Soc. of Engineering Science, Austin, 1975, p. 1223 (with R.H. Bryant).
"Layered Cylindrical Shells", Proc. of ASCE Engineering Mechanics Div. Specialty Conf.,
54.
Raleigh, 1977, p. 149 (with D. Logan).
"Piping Shear Lug Stress Analysis", Proc. Fourth Int. Conf. Structural Mech. in Reactor
55.
Tech., San Francisco, 1977, Paper F2/9 (with G.T. Kitz, V.K. Verma, J.S. Lan).
"On the Analysis of Nonhomogeneous Anisotropic Cylindrical Shells", Proc. Sixth Canadian
56.
Cong. Appl. Mech., Vancouver, 1977, p. 149 (with D. Logan).
Ind. J.
57. "Experimental Study of Stress Distribution in the End Zone of a Prismatic Beam",
of Technology, Vol. 14, 1976, p. 633 (with S. Mirza).
"Analysis of Edge-Beam Reinforced Layered Cylindrical Pressure Vessels", Joint
58.
ASME/CSME Pressure Vessel and Piping Conf., Montreal, 1978 (with D. Logan).
"An Asymptotic Analysis of the Layered Tube", Mechanics Today - Eric Reissner
59.
Symposium, Vol. 5, 1980, p. 543 (with M.W. Johnson and D. Logan).
"Layered Cylindrical Pressure Vessels", J. of Pressure Vessel Technology, Vol. 101,
60. No.
1, 1979, p. 80 (with D. Logan).
61. "Laminated Anisotropic Cylindrical Shell Subjected to a Circumferential Line Load",
Proc. Seventh Canada. Cong. Appl. Mech., Sherbrook, 1979, p. 117 (with D. Logan).
"Deflection of Transversely Loaded Prestressed Circular Plates", Proc. Third Engr.
62.
Mechanics Specialty Conf., Austin, 1979, p 598 (with R. Amon and B. Knobloch).
63. "Refined Theories for Nonhomogeneous Anisotropic Cylindrical Shells: Part I-Derivation",
J. of Engr. Mechanics Div., Proc. of ASCE, Vol. 106, No. EM6, 1980, p. 1053 (with D.
25
Logan).
64. "Refined Theories for Nonhomogeneous Anisotropic Cylindrical Shells: Part II-Application",
J. of Engr. Mechanics Div., Proc. of ASCE, Vol. 106, No. EM6, 1980, p. 1075 (with D.
Logan).
"On the Analysis of Composite Material Pressure Vessels", Proc. Fifth Symposium on
65.
Engr. Applications of Mechanics, Ottawa, 1980, p. 83.
66. "Consideration of Some Factors Influencing Compatibility of Dental Porcelain and Alloys,
Part I: Thermo-Physical Properties", Proc. Fourth Annual Meeting, Precious Metl Inst.,
Pergamon Press, 1981, p. 293 (with R.P. Whitlock, J.A. Tesk, A. Holmes and E.E. Parry).
67. "Consideration of Some Factors Influencing Compatibility of Dental Porcelain and Alloys,
Part II: Porcelain/Alloy Stress", Proc. Fourth Annual Meeting Precious Metal Inst.,
Pergamon Press, 1981, p. 283 (with J.A. Tesk, R.P. Whitlock, A. Holmes and E.E. Parry).
"Analysis of Ring Loaded Laminated Plastic Cylindrical Shells", ASCE Convention and
68.
Exposition, Hollywood by the Sea (Florida), Paper No. 80-573, 1980 (with D. Logan).
"Applications of the Finite Element Method in Dentistry", Int. Cong. on Technology and
69.
Technology Exchange, Pittsburgh, Paper No. ICTEE-82-137, 1982 (with J.A. Tesk, N.
Munir and R.W. Hinman).
"Application of Refined Shell Theories in Laminated Pressure Vessel Design", Int. Cong.
70.
on Technology and Technology Exchange, Pittsburgh, Paper. ICTEE-82-078, 1982 (with
D. Logan).
"A Shell Theory for Composite Cylindrical Pressure Vessels and Tanks, Pressure Vessel
71.
Design, PVP-57, American Society of Mechanical Engineers, New York, p. 167, 1982 (with
D. Logan).
72. "Ring Loaded Laminated Cylindrical Shells", Journal of Engineering Mechanics,
Transactions of ASCE, Vol. 108, No. EM5, p. 980, 1982 (with D. Logan).
"Membrane Theory for Nonhomogeneous Anisotropic Shells of Revolution", 1982:
73.
Advances in Aerospace Structures and Materials, AD-03, American Society of Mechanical
Engineers, New York, p. 1, 1982 (D. Logan).
"Effect of Porcelain/Alloy Interfacial Diffusion Zones on Thermomechanical Strain", Journal
74.
of Dental Research, Vol. 62, No. 5, p. 585, 1983 (with J.A. Tesk, R.W. Hinman, A.D.
Holmes and J.M. Cassel).
75. "Potential Role of Supercomputers in Mechanical Systems Research at the University of
26
Illinois at Chicago", Final Report to NSF on A Study of Supercomputers in Mechanical
Systems Research; Lawrence Livermore National Laboratory, p. IV, MI-l, 1984 (with R.H.
Phillips, and A. Shabana).
76. "Three-Dimensional Analysis of a T-Branch Piping Connection", Fracture, Fatigue and
Advanced Mechanics", PVP 98-8, American Society of Mechanical Engineers, New York,
p. 3, 1985 (with R. Natarajan).
"Coordination of Industry/Government/University Research and Code Activities", Nuclear
77.
Engineering and Design, Vol. 98, p. 367, 1985 (with G.T. Kitz).
"Computer Aided Analysis of Filament Wound Pressure Vessels", Proceedings of Third
78.
National Conference UPCAEDM '85, Purdue University, p. 89, 1985 (with R. Natarajan).
79. "Validity of Various Shell Theories Applicable in the Design and Analysis of Cylindrical
Shells", Design and Analysis of Plates and Shells, Special Publication PVP-105, ASME,
New York, 1986.
80. "Stress Analysis of Cylinder-Cylinder Junctions", Design and Analysis of Plates and Shells,
Special Publication PVP-105, ASME, New York, 1986 (with R. Natarajan, P. Afshari).
"Elastic-Plastic, Plane Strain Analysis of Compressible Materials", Journal of Pressure
81.
Vessel Technology, Vol. 109, p. 357, 1987 (with H. Fan).
"Stress Analysis of Elliptical Tube Plates in Heat Exchangers", Journal of Pressure Vessel
82.
Technology, Vol. 109, 1987, p. 301 (with Z.F. Sang).
83. "Computer Aided Analysis of Horizontally Supported Pressure Vessels", in Recent
Advances in Structural Dynamics, Special Publication PVP-124, ASME, New York, 1987
(with R. Natarajan, H.R. Patel).
"Analysis of Large Horizontal Pressure Vessels Supported on Saddles", Proceedings of
84.
UPCAEDM '87, Ohio State University, Columbus, Ohio, 1987 (with R. Natarajan).
"A Finite Element Model to Analyze Cylinder - Cylinder Intersections", Journal of Pressure
85.
Vessel Technology, Vol. 109, p. 411, 1987 (with R. Natarajan, P. Afshari)
86. "On the Derivation of a Refined Theory for Nonhomogeneous Anisotropic Shells of
Revolution", Journal of Pressure Vessel Technology, Vol. 110, p. 102, 1988 (with H.
Fan)
87. "On the Asymptotic Formulation for Plates and Shells, Computational Mechanics '88,
Vol. 1 (Theory and Applications), p. 21. iv, Springer Verlag, 1988 (with H. Fan)
"A Quadrilateral Hybrid Stress Plate Element Based on Natural Strains", Journal of
88.
27
Pressure Vessel Technology, Vol. 110, 1988, p. 212 (with N. Munir)
"Stress and Strength Analysis of Concentric Reducers Consisting of Plates", Journal of
89.
Pressure Vessel Technology, Vol. 110, 1988, p. 217 (with Z.F. Sang)
"Local Stresses Caused by Saddle Supports in Horizontal Vessels", Quality Computer-
90.
Aided Engineering for Industry and Education, PVP- Vol 142, ASME, New York, 1988, p.1
(with Z.F. Sang, P. Afshari and R. Bhattacharya)
"Cut-Outs in Laminated Plates and Shells", Advances in Macro-Mechanics of Composite
91.
Material Vessels and Components, PVP-Vol. 146, ASME, New York, 1988, p.155 (with M.
Moumene)
"Three-Dimensional Analysis of Horizontal Pressure Vessels", Proceedings of the 6th
92.
International Conference on Pressure Vessel Technology, Vol. 1-Design and Analysis,
Beijing, 1988, p. 587 (with R. Natarajan, Z.F. Sang)
93. "The Large Deformation Analysis of Flexible Pipes Subjected to Impact Loading",
Proceedings of the 6th International Conference on Pressure Vessel Technology, Vol. 1-
Design and Analysis, Beijing, 1988, p. 501 (with E.M. Bakr, Y.F. Lu)
94. "On the Fiber-Reinforced Beam", Recent Advances in the Macro-and Micro-Mechanics of
Composite Materials Structures, AD - Vol. 13, ASME, New York, 1988, p. 225 (with H.
Fan)
"On the Design of Horizontal Pressure Vessels", Journal of Pressure Vessel Technology,
95.
Vol. 110, 1988, p. 393 (with Z.F. Sang, R. Natarajan)
"Membrane Theory for Anisotropic Laminated Shells of Revolution", Journal of Pressure
96.
Vessel Technology, Vol. 111, p. 130, 1989, (with D. Logan).
"Finite Element Approach to Analysis of Pressure Vessels and Piping", Proceedings of 4th
97.
International ANSYS Conference, 1989, Pittsburgh, Vol. 1a, p. 16-41 (with P. Afshari,
Z.F. Sang, R. Natarajan, R. Bhattacharya).
"On the Effect of Inclined Hole in a Plate", Proceedings of Canadian Congress of Applied
98.
Mechanics, 1989, Ottawa, (with M. Moumene).
99. "Stress Concentration and Performance Index for Multilayered Composite Plates with
Circular Holes", Composite and Other New Materials for PVP: Design and Analysis
Considerations, PVP Vol. 174, ASME, New York, 1989, p. 209 (with M. Moumene, G.
Puntambekar).
100. "Flexibility Factors for Branch Pipe Intersections", Design and Analysis of Piping
28
Components, PVP-Vol. 169, ASME, New York, 1989, p. 17 (with R. Natarajan).
101. "Applicability of Asymptotic Beam Theories to Thin (Thick) Walled Pipes", in Analytical
and Computational Models for Shells, ASME, 1989, New York, pp. 33-54 (with H. Fan).
102. "Finite Element Method for Evaluating Stresses Around Cutouts in Multilayered Composite
Structures", Proceedings of CSME Mechanical Engineering Forum 1990, Toronto, 1990,
(with M. Moumene).
"Refined Engineering Beam Theory Based on the Asymptotic Expansion Approach", AIAA
103.
Journal, Vol. 29, 1991, pp. 444-449 (With H. Fan)
104. "Design of Large Horizontal Pressure Vessels", Petrochemical Equipment, Vol. 19, 1990,
p. 1 (in Chinese) (with Z.F. Sang).
"Beam Theory and Its Suitability for the Analysis of Pipes", Journal of Pressure Vessel
105.
Technology, Vol. 113, p. 291, 1991, (with H. Fan, P. Afshari).
"Fatigue Behavior of Tube-to-Tubesheet Expanded Joints", Journal of Pressure Vessel
106.
Technology, 1991, p. 342, (with Z.F. Sang and Y.Z. Zhu).
"Admissible Velocity Field for the Upsetting of Cylindrical Workpieces"', Proceedings of
107.
North American Manufacturing Research Conference, Transactions of SME, Detroit, 1991,
(with Z.H. Cai).
"Dynamic and Stress Analysis of Spatial Flexible Mechanical Systems," Proceedings of the
108.
4th International Conference on Design Theory and Methodology, Vol.47, P. 573,
Phoenix, AZ, 1992 (with J. Kremer and A. Shabana).
"On the Proper Boundary Conditions for a Beam", Journal of Applied Mechanics, Vol. 59,
109.
1992, p. 915 (with H. Fan).
"Reliability Factors of Tube-to-Tubesheet Joints", Proceedings of the 7th International
110.
Conference on Pressure Vessel Technology, D sseldorf, 1992 (with Z.F. Sang and Y.Z.
Zhu).
111. "Large Reference Displacement Analysis of Composite Plates. Part I: Finite Element
Formulation", International Journal for Numerical Methods in Engineering, Vol. 36, 1993,
p. 1 (with J. Kremer and A. Shabana).
112. "Large Reference Displacement Analysis of Composite Plates. Part II: Computer
Implementation", International Journal for Numerical Methods in Engineering, Vol. 36,
1993, p. 17 (with J. Kremer and A. Shabana).
113. "An Eight Noded Plate Element for the Dynamic Analysis of Spatial Mechanism Systems,"
29
Journal of Nonlinear Dynamics, Vol. 5, 1994, p. 476, (with J. Kremer and A. Shabana).
114. "A Finite Element Approach for the Stress and Large Displacement Analysis of Composite
Structures", Proc. of 5th Int'l Conf. on Production Engineering, Design, and Control,
Alexandria, Egypt, 1992 (with J. Kremer and A. Shabana).
ASME
115. "New Design of Junction Connecting Circuit Boards in Electronic Packaging",
Winter Annual Meeting, Paper 91-WA-EEP-50, Atlanta, 1991, p.1 (with Z. Cai).
"Analysis of Shell Intersections", Proceedings of 7th International Conference on Pressure
116.
Vessel Technology, D sseldorf, 1992 (with P. Afshari, J. Lu, R. Natarajan, R.P. Lin, X.
Xu).
"On the Use of Variational Principles to Derive Beam Boundary Conditions", Journal of
117.
Applied Mechanics, Vol. 61, 1994, p. 470 (with H. Fan).
118. "Foot Force Distribution of Walking Machine with Consideration of Terrain Properties",
Journal of Terramechanics, Vol. 29, 1992, p. 497 (with C.Q. Zheng and S.M. Sang).
119. "Application of Composite Plate Theory and the Finite Element Method to the Dynamic and
Stress Analysis of Spatial Flexible Mechanical Systems," Journal of Mechanical Design,
Vol. 116, 1994, p. 952 (with J. Kremer and A. Shabana).
"New Higher Order Engineering Beam Theory, Journal of Pressure Vessel Technology,
120.
Vol. 115, 1993, p. 325 (with W.C. Zheng).
Determination of Forward Slip in H-Beam Rolling, Journal of Materials Processing
121.
Technology, Vol. 54, 1995, p. 114 (with W. Zhang and C. Zhu).
122. On the Use of the Upper-Bound Method for Load Determination in H-Beam Rolling,
Journal of Materials Processing Technology, Vol. 56, 1996, p. 820 (with W. Zhang and
C. Zhu).
123. "Report on PVRC Programs Dealing with Shell Intersections on Plastic Piping,"
Proceedings of the Post SMiRT Conference on Construction Codes and Associated
Engineering Mechanics, Juelich, Germany, C12, 1993 (with T. Hsu, G. Leon, Z. Sang and
W. Short).
124. "Design and Fabrication of Plastic Pressure Vessels, PVPD Tutorial Series Notes, PVP-
14, ASME, New York, 1993 (with G. Leon).
125. Comparison of International Standards for Polymer Plastic Piping Design, PVP Publ. Vol.
259, 1993, p. 55, ASME, New York (with G. Leon, C. Ziu).
"Stress and Displacement Analysis of Composite Laminated Plates, Journal of
126.
30
Thermoplastic Composite Materials, Vol. 7, 1994, p. 375 (with P. Afshari).
"Decay Analysis in a Bimaterial Cylinder," Acta Mechanica Sinica, Vol. 10, No. 4, 1994,
127.
p. 302 (with H. Fang, S. Qin).
128. "Determination of Sample Size in In-service Inspection," in Plant Systems/Components
Aging Management 1994 (I. T. Kisisel, ed.), PVP-Vol. 283, ASME, 1994, p. 91 (with S.
Qin).
"Uncertainty Analysis in Quantitative Risk Assessment," Journal of Pressure Vessel
129.
Technology, Vol. 48, 1996, p. 121 (with S. Qin).
130. "Use of Stress-Strength Model in Determination of Safety Factor for Pressure Vessel
Design, Journal of Pressure Vessel Technology, Vol. 118, 1996, p. 27 (with S. Qin).
"Free Vibration Analysis of Laminated Composite Plates," Proceedings of Enercomp '95,
131.
Montreal, 1995 (with P. Afshari).
132. "Comparison of International Design Rules for Plastic Bolted Flanged Connections,"
Proceedings of the 1995 Pressure Vessel and Piping Conference, PVP Vol. 305, p.
189, ASME, Honolulu, 1995 (with G. Leon, D. Chew, W. Short).
133. "Behavior of Pad-Reinforced Cylindrical Vessels Subjected to Axial Thrust on Nozzle,"
Proceedings of 1995 Pressure Vessel and Piping Conference, PVP Vol. 318, p. 1, ASME,
Honolulu, 1995 (with Z.F. Sang, L. Li and H.L. Chien).
"Reliability Factors and Tightness of Tube to Tubesheet Joints," Journal of Pressure
134.
Vessel Technology, Vol. 118, 1996, p. 137 (with Z.F. Sang and Y. Zhu).
"On the Internal Hydrostatic Pressure Testing of Straight Thermoplastic Pipe," Proceedings
135.
of the 1996 Pressure Vessel and Piping Conference, Vol. 331, p.89, Montreal, 1996,
(with J. Shi, P. Chada and G. Leon).
"Local Stresses in Cylindrical Vessels Due to Moment on the Nozzle," Proceedings of the
136.
8th International Conference on Pressure Vessel Technology, Vol. 2, p. 97, ASME,
Montreal, 1996 (with Z.F. Sang and L. Li).
137. "Stress and Strength Analysis of Fiber Reinforced Plastic Pipe Tees with Reinforcement,"
Proceedings of the 96 Pressure Vessel and Piping Conference, PVP Vol. 326, p. 201,
Montreal, 1996, (with Z. Wei and M. Xue).
138. "Literature Study and Interpretive Study on Thermoplastic and Reinforced Thermosetting
Resin Piping and Component Standards," Welding Research Council Bulletin, No. 415,
New York, 1996, (with W. Short, G. Leon and C. Ziu).
31
"Local Stresses in Cylindrical Vessels due to Axial Thrust on Nozzle," Proceedings of the
139.
1996 Pressure Vessel and Piping Conference, PVP Vol. 333, p. 3, Montreal, 1996, (with
Z.F. Sang, L. Li and H.L. Chien).
"Determination of Sample Size for In-service Inspection, Journal of Pressure Vessel
140.
Technology, Vol. 119, 1997, p. 57, (with S. Qin).
141. Effect of Geometric Gap between Cylinder and Reinforcement Pad on Local Stresses
(Axial Thrust on Nozzle), International Journal of Pressure Vessel and Piping, Vol.
71, 1997, p. 113 (with Z.F. Sang, L. Li and H.L. Chien).
Updated Comparison of International Standards for Polymer Piping, Proceedings of the
142.
1996 CETIM Conference, Cannes, France, 1996 (with G. Leon and W. Short).
143. Development of a Reliable Procedure for Obtaining Design Coefficients for Thermoplastic
Pipe Under Internal Pressure, Proceedings of the 1996 CETIM Conference, Cannes,
France, 1996 (with G. Leon and J. Shi).
144. Effect of Geometric Gap Between Cylinder and Reinforcement Pad on Local Stresses
(Moment Loadings on Nozzle), Proceedings of the 1997 Pressure Vessel and Piping
Conference, Vol. 357, p. 151, Orlando, FL (with Z. Sang, L. Li, and H.L. Chien).
145. Hybrid Elements Stress and Displacement Analysis of Composite Laminated Plates,
Proc. of the Society for Composites, 1994, Technomic Publ., p. 1069 (with P. Afshari)
146. Calculation of Temperature and Determination of Deformation Resistance in H-Beam
Rolling, (1) Temperature Variation in a Stand, Journal of Materials Processing Technology, Vol.
94, 1999, p. 123 (with W. Zhang, Q. Zhou and C. Zhu).
147. Calculation of Temperature and Determination of Deformation Resistance in H-Beam Rolling - (2)
Total Change of Temperature and Deformation Resistance, Journal of Materials Processing
Technology, Vol. 94, 1999, p. 128 (with W. Zhang, Q. Zhou and C. Zhu).
148. Effect of Gap Between Pad and Vessel for Moment Loading on Nozzles, Journal of Pressure
Vessel Technology. Vol. 121, 1999, p.225 (with Z. Sang, L. Li and Y.J. Zhou).
149. On the Determination of Long-Term Hydrostatic Strength of Plastic Pipe, WRC Bulletin
No. 445, Welding Research Council, New York, 1999, p.24 (with L. Zhao).
150. Parametric Finite Element Analysis of Large Diameter Ratio Shell Intersections
Subjected to Internal Pressure, Proc. Of the 15th International Conference on Structural
Mechanics in Reactor Technology, Seoul, Korea, 1999 (with Z. Wei).
151. Design and Analysis Techniques for Filament-Wound Composite Pressure Vessels, Polymeric
32
Systems - 1999, MD-88, ASME 1999, p.57 (with E. Howard).
152. External Pressure Testing of High Density Polyethylene Pipe, Proceedings of the Pressure
Vessel and Piping Conference, Seattle, PVP - Vol. 399, ASME, July, 2000 (with N. Beuse and
L. Zhao).
153. Free Vibration Analysis of Composite Plates, Journal of Pressure Vessel Technology, Vol.
122, 2000, p. 390 (with P. Alshari).
154. Limit Analysis and Burst Test for Large Diameter Interactions. WRC Bulletin No. 451, Welding
Research Council, New York, 2000 (with Z. Sang, L.P. Xue and Y.J. Lin).
155. Limit and Burst Pressures of a Cylindrical Vessel with a 30 degree Lateral (d/D=0.5),
Proceedings of the Ninth Conference on Pressure Vessel Technology, Sydney, Australia, 1999
(with Z. F. Sang, Y.J. Lin and L.P. Xue).
156. Internal and External Hydrostatic Pressure Tests of HDPE Pipes, Proceedings of the Ninth
International Conference on Pressure Vessel Technology, Sydney, Australia, 2000 (with L.P. Zhao,
J. Shi and N.M. Beuse).
157. External Pressure Testing of Four-Inch Diameter High Density Polyethylene Pipe, Journal of
Pressure Vessel Technology, Vol. 123, 2001, p. 398 (with L. Zhao and N.M. Beuse).
158. Medical Imaging Genesis for Finite Element-Based Mandibular Surgical Planning in the Pediatric
Subject, 23rd Annual International Conference of the IEEE Engineering in Medicine and Biology
Society, Istanbul, Turkey, October 2001 (with L. Zhao, P.K. Patel, H. Han and G.F. Harris).
159. Determination of Physiological Cross-Section Area of Patient-Specific Masticatory Muscles with
Three-Dimensional Medical Imaging Analysis, Proceedings of the 24th Annual International
Conference of IEEE/EMBS and Fall Meeting of BMES, Houston, TX, 2002, p. 2538 (with L.P.
Zhao, P. Patel and G.F. Harris).
Multi-body Dynamic Simulation of Acti-Valve, Proceedings of 7th International LS-DYNA Users
160.
Conference, Dearborn, MI, May 2002 (with C. Cheng and M. Fassett).
161. Influence of Pad Reinforcement on the Limit and Burst Pressures of Large Diameter
Cylindrical Shell Intersections, Proceedings of the Pressure Vessel and Piping
Conference, Vol. 447, ASME, Vancouver, Canada, 2002, p. 125 (with L. Xue and Z.F.
Sang).
162. Finite Element Modeling of Mandible: From Geometric Model to Tetrahedral Volumetric
Mesh, Proceedings of the 10th Medicine Meets Virtual Reality Conference, Newport
Beach, CA, 2002, IOS Press (with L.P. Zhao, P. Patel and G.F. Harris).
163. Limit and Burst Pressures of a Cylindrical Shell Intersection with Intermediate Diameter
Ratio, International Journal of Pressure Vessels and Piping, Vol. 70, p. 341, 2002
(with Z.F. Sang, L. Xue and Y.J. Lin).
164. Design of Large Diameter Ratio Shell Intersections Subjected to Pressure and External
Loadings, WRC Bulletin No.497, Welding Research Council, New York, 2004 (with
W. Koves, K. Mokhtarian, and E. Rodabaugh).
165. Development of a Computer Assisted Craniofacial Surgery Planning System,
33
Proceedings of the 11th Medicine Meets Virtual Reality Conference, Newport Beach, CA,
2003, IOS Press (with L.P. Zhao, P. Patel and G.F. Harris)
166. Flexibility Factors and Stress Intensity Indices for Branch Pipe Connections Subjected
to In-Plane and Out-of-Plane Moments, Proceedings of the International Council on
Pressure Vessel Technology, Vienna, Austria, pp 27-31, 2003 (with L. Xue and Z. Wei).
167. Influence of Pad Reinforcement on Limit and Burst Pressures of Large Diameter
Cylindrical Shell Intersections, Journal of Pressure Vessel Technology, Vol. 125, No.
2, 2003, p. 182.
168. Guidelines for FEA Modeling of Cylinder-to-Cylinder Intersections, WRC Bulletin No.
493, Welding Research Council, New York, 2004 (with Liping Xue).
169. Guidelines for FEA Modeling of Cylinder-to-Cylinder Intersections, American Society of
Mechanical Engineers, Proceedings of Pressure Vessels and Piping Conference, Vol.
477, San Diego, p. 47, 2004 (with L. Xue).
170. Effect of the Geometry of Groove on Connection Strength of the Hydraulically
Expanded Tube-to-Tubesheet Joints of Heat Exchangers, American Society of
Mechanical Engineers, Proceedings of Pressure Vessels and Piping Division
Conference, Vol. 477, San Diego, p. 85 (with H.F. Wang and Z.F. Sang).
171. Limit and Burst
Contact this candidate