Quality Assurance Engineer

Kejiao (Joe) Wang P.Eng.

** ******* ****** **** *****: 416-***-****

Toronto, Ontario Home Phone: 416-***-****

Canada, M9W 1V1 E-mail: **********@*****.**

OBJECTIVE: Mechanical Engineer or QA/QC Specialist of Process Equipment

EXPERIENCES & SKILLS:Experienced as CAD Specialist (piping) in Solidworks.Experienced as QA/QC Specialist and Operational Readiness Representative for Bruce Power Station A Restart Project.Experienced as Pressure Boundary Design Evaluator for CRN Registration and QA Engineer and Auditor of CANDU Nuclear Quality Assurance System in GTA, Ontario, Canada.Experienced as Mechanical Engineer (evaluating Pressure Vessel Designs) and Authorized Pressure Vessel Inspector (covering Welding, NDE and some Boilers) in China;Knowledgeable in the requirements of the Boiler and Pressure Vessel Codes and Standards as referenced by CSA, ASME, MSS, API, ISO, etc.Computer Skills: FEA, Solidworks, Compress Build 6252, MathCAD, Visio, MindJet, PaperPort, Excel, PowerPoint, Word Perfect, Microsoft Word, etc.

LICENSES & CREDENTIALSCertified Welding Inspector (Level 1) 2012

By Canadian Welding Bureau (CWB)Licensed Professional Engineer of Ontario, Canada 2005

By Professional Engineers Association of OntarioPassed National Board of Boiler & Pressure Vessel Inspector Commission Examination

in a Grade of 87% (Covering ASME Sec. I, IV, V, VIII, IX, B31.1 and NBIC) 2002

By National Board of Boiler & Pressure Vessel Inspectors), USAAuthorized Pressure Vessel Inspection Engineer (covering Welding and NDE) 2001

By National Quality Technology Supervision Bureau of ChinaMechanical Engineer 1996

By Personnel Bureau of Weifang City, ChinaAuthorized Pressure Vessel Inspector (R2) (covering Welding and NDE) 1992

By Labour Department of Shandong Province, China

WORK HISTORY

Self-Employed 2008 to Present

CAD Specialist (Contractor)

OneCAD Solutions Ltd., Markham, ON Established 3D Models and created 2D drawings of piping systems by Solidworks.

QA/QC Specialist (Contractor)

Comstock for Bruce Power Station A Units 1 & 2 Restart Project, Tiverton, ON Reviewed the FWPs (Field Work Package) including piping documents in SGR (Steam Generator) Project, Commented to the original Inspector of specific inspection activity on correction of the documents to improve, revised and prepared the documents as necessary for closure and acceptance of the FWPs by the PMC as part of the ECC Process;Conducted the receiving inspection of the materials including pipe fittings for the Valve Project, requested for the right document or material when it was not acceptable;Prepared and reviewed the ITPs (Inspection and Test Plan) for the Valve Project.

Operational Readiness Representative (Contractor)

AMEC NCL for Bruce Power Station A Units 1 & 2 Restart Project, Tiverton, ON Reviewed in-service binders including piping documents for completeness and correctness;Conducted walkdowns for the compliance to DCN of the physical installation of piping systems;Verified the readiness of return to service of Bruce A Units 1 & 2 restart projects based on the results from the above two steps, as part of the ECC Process.

QA Engineer & Auditor of CANDU Nuclear QA System 2007 to 2008

Atomic Energy of Canada Limited (AECL), Mississauga ON L5K 1B2Reviewed and commented on the ITPs (Inspection and Test Plan) and Route Sheets as to QA and Code requirements for improvement;Analyzed and revising procedures and operating instructions; Conducted internal audits (i.e. 21RT site) and supplier audits (i.e. CH2M Hill) for the purpose of performance improvement.Analyzed the internal audit reports and ANRs (Audit Non-conformance Report) for trend and performance improvement.

Design Evaluator, QA Engineer/Auditor of Nuclear QA System 2003 to 2007

ANRIC Enterprises Inc. Toronto, ON

ANRIC is an engineering consulting service company engaged in providing technical and professional engineering services associated with the evaluation and development of system and component pressure boundary designs. ANRIC provides consulting services to help CANDU Nuclear Manufacturers and CANDU Nuclear Power Plants get and keep a Certificate of Authorization from TSSA or ASME. ANRIC also provides engineering training course encompassing the requirements of the Boiler and Pressure Vessel Codes and Standards. Reviewed and analyzed pressure fitting (including pipe fitting, flange, valve, etc.) design documentation provided by world-wide clients for direct CRN (Canadian Registration Number) registration by ANRIC on behalf of CSA for the three provinces of Manitoba, Saskatchewan and Quebec, in accordance with relevant codes, standards and regulations, and commented on the designs for improvement if not acceptable. Provided clients with improvement comments through reviewing and analyzing pressure fitting, pressure vessel and boiler design documentation and conducting strength calculations when necessary, so as to facilitate the process of application for CRN registration in Canadian Jurisdictions.Reviewed some nuclear class demo designs like Emergency Feed Water Vessel and commented for improvement. Reviewed and evaluated the CANDU Nuclear QA Manuals and procedures of the clients including the NQA Plan of AECL for Bruce Power 21RT Program and commented for their improvements; Reviewed other QA documents like the Risk Log of Bruce Power; Developed the Nuclear QA Manuals and procedures for the clients; Prepared the Audit Plan and checklists for audit; Audited the Nuclear Quality Assurance Systems of the clients through checking the quality assurance records for performance improvement and achievement of Certificate of Authorization; Wrote the Audit Reports; Verified the improvement results.

Mechanical Engineer & Authorized Pressure Vessel Inspector 1990 to 2002

The Boiler and Pressure Vessel Inspection Institute of Weifang City, China Certified by evaluation, inspection (covering NDE) and witnessing that the pressure vessels and boilers were designed and fabricated in accordance with the relevant Codes and Standards.Inspected (covering NDE) periodically the in-service pressure vessels, boilers and piping after they had been installed and/or put into service to maintain the integrity for continued use, including supervision of repair, modification and alteration of in-service pressure vessels, boilers and piping.Audited the manufacturers’ Quality Assurance Systems.Commented to the clients on the performance of their quality assurance systems and specific inspection jobs and verified the results of improvements.

EDUCATION & TRAINING CERTIFICATESWelding Training Course (with the GPA of 87.5% for 11 modules) 2012

By Canadian Welding Bureau (CWB)An Introduction to Project Management (Successfully completed in a grade of 88%) 2011

By MicroSkills Solidworks Essentials 2010

By Javelin Technologies Inc.Orange Badge Training 2008

AMEC Safety Induction, Environmental ISO 14001, WHMIS, Safety Rules,

Fall Protection Training 2008

By AMEC NCL Training Centre in KincardineFormal Document Template Introduction 2008

Technical Report & Procedure Writing 2007

CANDU Introduction to Fuel Design 2007

TRAK (AECL’s Documentation System) 2007

By AECL Internal TrainingASME B31.1 Power Piping (Materials, Fabrication & Examination) 2006

Workshop-ASME Section III NCA-4000, Nuclear Quality Assurance 2005

ASME Section III, Nuclear Quality Assurance-NCA/NQA-1 2005

Nuclear Quality Assurance Auditor-Lead Auditor Training Workshop 2005

ASME Section III-An overview, Rules for Construction of Nuclear Facility

components 2004

Jurisdictional and Code Requirements 2004

CSA B51 Part 1 Boiler, Pressure Vessel and Pressure Piping Code 2004

CSA N285.0, General Requirements for Pressure-Retaining Systems

and Components in CANDU Nuclear Power Plants 2003

By ANRIC Enterprises Inc. Training Centre, Toronto, Ontario, CanadaEvaluation of Credential of Academic, Bachelor of Engineering 2003

By Comparative Education service, University of Toronto, CanadaTraining Course for Pressure Vessel Inspection Engineer (covering Welding and NDE) 2001

By National Quality Technology Supervision Bureau of ChinaTraining Course for Pressure Vessel Inspector (covering Welding and NDE) 1991

By Labour Department of Shandong Province, ChinaBachelor’s Degree in Mechanical Engineering of Process Equipment

(Covering Pressure Vessel, Pressure Fitting, Pressure Piping, Pump, Turbine, Compressor) 1990

By Shandong University of Technology, China

Contact this candidate