Quality Assurance Control

LUIGI D'ANTONIO

Resum

< born in Naples on **/21/1956

< home address Tito Livio street n.3 80122 Naples

< ph.: 39-81-575**** (home), 335-***-**** (cell ph.)

< Email **************@***.**

< married, two children.

TITLES

after classical studies he graduated in mechanical engineering at the

Engineering Faculty of the University of Naples on 12/16/1986

working on an experimental thesis on non destructive evaluation of

composite materials whit ultrasonic techniques

on November 86 he classified second for a Magnaghi Naples

scholarship on "Design and manufacturing of composite airframe

structures"

on november 87 he took a course on industrial radiography at the

School of Applied Non Destructive Testing of the Welding Institute

in Cambridge UK, after this and having developed experience on the

job he was certified for Alenia X Ray III level per MIL-STD 410E

on march 88 he took a course on Non Destructive Inspection with

Ultrasound at the Ecomag company in Milan Italy; after this, and having

developed experience on that job, he was certified for Alenia US III

level per MIL-STD 410E

from January 92 to June of the same year he took a course on Total

Quality at the Boeing Commercial Airplanes Materiel Division in

Seattle USA; he was qualified by Boeing, after experimental

implementation of the concepts on the real practice, Advanced Quality

System Trainer.

from December 95 to February 96 he took a course on Metrology organized

by AICQ (Italian Association for Quality), c/o the Pomigliano d'Arco Alenia

plant

on June 96 he took a course on the organization of Testing

Laboratories within the UNI CEI EN 45001 standard; the course was

organized by EMIT LAS in Milan with, as teachers, technicians operating

with national metrology laboratories and SIT (Italian calibration Service)

on June 96 he took a course on Management and Quality Assurance of

Testing Laboratories organized by ALPI (Indipendent Testing Laboratories

Association and SINAL (Italian National Laboratories Accreditation

System)

from October 97 to February 98 he took a 200 hours course on Quality

related topics within the ISO 9000 standards family to fulfil the

minimum requirement for the admission to the European Register of

Quality System Manager maintained by the European Organization for

Quality. The course consisting in theory and application of case studies

was teached from AICQ(Italian Association for Quality)

foreign language knowledge: English - American satisfying, consolidated

during long stays in the U.S. (on 83 he earned the Certificate

for Proficiency in English from the University of Michigan);

French, scholastic knowledge.

WORK EXPERIENCES

starting from march 87 he works with Alenia within the New

Materials Development Group of the Technical Direction, where his job

deals with Non Destructive Evaluation of airframe structures and

Manufacturing Technologies.

more in detail his duties comprehend:

experimentation and set-up of procedures together with Quality Control

personnel training for the Non Destructive Inspection of airframe

structures and components

the same above mentioned activities related to inspection of

aircrafts in service and during fatigue testing using ultrasound

radiography and eddy current testing

implementation in the design-production cycle of Boeing Total Quality

techniques (Advanced Quality System)

participation in the issuing of company standards related to the

Alenia Total Quality approach.

Within the above described activities he works closely in touch

with customers/partners like Boeing, Douglas, Aerospatiale and AMI

(Italian Military Aviation) acting side by side with the Quality

Assurance, the production engineering and the Commercial Department.

research in the above mentioned fields and specifically:

"Development of through transmission and pulse-echo ultrasonic

techniques", research theme developed by Alenia with own personnel

and in cooperation with the National Research Council in Pisa, the

Engineering Faculty of the University of Naples and the Center for

Composite Materials of the University of Delaware (USA)

image processing with digital techniques adopting hw/s systems using Ms-

DOS, MPX, UNIX and MAC-OS.

smart manufacturing technologies related to innovative metallic

materials and hybrids

from February 90 to May of the same year he acted as Industrial Intern at

the Centre for Composite Materials of the University of Delaware where

he works on the development of pulse-echo ultrasonic techniques

with robotized manipulators and Unix workstations

- from 90 to 93 he represents Alenia in the Industrial Advisory

Board for the addressing of the research policies of the University of

Delaware

the research work is directly developed in the Alenia laboratories or

is managed within a cooperation with external entities, mostly in the

framework of European research programs with EU financing.

starting from April 1996 he works with CIRA (Italian Aerospace

Research Center), here he works within the Quality Assurance and has the

responsibility of Metrology . Within his duties he is responsible of

the design implementation and continuous improvement of the

Laboratories Quality System. The system itself is based on UNI CEI EN

ISO/IEC 17025.

his duties relate with the design and realization of a metrological

laboratory able to satisfy the calibration needs of all testing

inspection and control devices used at CIRA laboratories

he moreover cooperates with the CIRA corporate Quality Assurance for the

issuing of CIRA Quality System documentation (the CIRA Quality System

is based on UNI EN ISO 9001 and was certified by UNAVIAcert in January

04), for the personnel training on quality related topics and for the

Quality Assurance of the Unmanned Space Vehicle and of the Unmanned Air

Vehicle projects.

Printed Papers

"Distributed System for Quality Control of Aerospace Structures" L.

Azzarelli, E. Bozzi, M. Chimenti, 0. Salvetti, L. D'Antonio, and C.

Sabatino. published on Materials Evaluation february 1991.

Lectures

"The Alenia Approach to Integrate Non Destructive Testing Methodologies",

G. Cavaccini, A. Ciliberto, L. D'Antonio, C. Sabatino, presented at:

Experimental Tecniques and Design in Composite Materials 22 e 23 Ooctober

1992 Congress in Cagliari (Italy).

Technical Reports:

"Ultrasonic Nondestructive Evaluation of Resistance Welded Thermoplastic

Composite Plates" CCM (Center for Composite Materials, University of

Delaware USA) report 91-07, L. D'Antonio and K.V. Steiner.

Thesis (as tutor)

"Il Miglioramento della Qualit nella Produzione Attraverso l'applicazione

dei Criteri di Robust Design e l'organizzazione dei Sistemi Qualit

Avanzati. Il Caso della Produzione di Particolari Aereonautici" Giuseppe

Fava, rnatr.1319155. Academic Year 1992/93. Mechanichal Engineering. Tutor

Ch.mo Prof. Ing. V. Zoppoli, co-tutors ingg. L. D'Antonio e P. Sessa.

"Sviluppo di tecniche ottiche ad elevata risoluzione per caratterizzazioni

dimensionali" Immacolata Colamatteo, matr 007*******. Academic Year

1996/1997. Physics Tutor Ch.mo Prof . Dott P. Maddalena. Co-tutor ing. L.

D'Antonio.

Contact this candidate