Electrical Project Manager
Resume:
Gregory A. O'Neal
Missouri City, TX. 77459
Home: 253-***-****
Email: *********@*******.***
Attn Hiring Personnel:
I know that the diversity in knowledge and experience I have obtained will be a contributing asset for
this company’s needs. I have worked in Engineering for approximately 20 years performing many
various engineering tasks. I have also worked in the Commercial, Industrial and Residential
Construction Industry for over 10 years. As my enclosed resume indicates, I have successfully
completed projects and made appointed deadlines. I have many assets to offer such as: excellence in
organizational, communications, prioritization skills, accuracy, motivation, ambitious, self disciplined,
a team player as well as quick learning capabilities.
Although I have worked in the contract employment arena, it was only due to playing professional
football and did not want to make a commitment I knew I would not keep. My last two positions prior
to managing my own company were permanent careers at Coastal Electrical who went out of
business and AB & Palumbo Electrical, which decided to close doors after many years in the
business. I am seeking stable employment and not contract employment so we can utilize all my
assets for Company, Clientele and personal growth. I am an optimist, easy to get along with and carry
myself in a professional manner.
My business was tied to this Real Estate Market collapse and when times were slow, I contracted out
my services to MEP companies in the Houston Market to Design and Estimate Fire Protection,
Mechanical, Plumbing and Electrical Construction, so I very well versed in what it takes to make a
building operational. I am willing to relocate as required and I am not tied here to the Houston area at
all, not a house or family to move and can start immediately.
I look forward to talking with you in regards to the opportunities you have available and to set up an
interview.
The bottom-line in hiring me as opposed to another candidate you are considering, is that you
will not regret hiring me!
Thank you for reviewing my information as well as your time and considerations
Sincerely,
Gregory A. O’Neal
Résumé of
GREGORY O’NEAL
3315 Glenn Lakes Lane
Missouri City, TX. 77459
Cell: 253-***-****
Email: *********@*******.***
EDUCATION
B.S., Mechanical Engineering
Trinity College & University; Metairie, Louisiana
A.A., Mechanical Design and Drafting
Beta Technical College; Long Beach, California
Studies in Mechanical Engineering
Cerritos College; Norwalk, California
TECHNICAL TRAINING
Solidworks Certification
Texas Engineering, Houston, TX.
National Electric Codes
Renton Technical College; Renton, Washington
Construction Estimating
Means Estimating Training; Seattle, Washington
Construction Estimating
NECA; Everett, Washington
PROFESSIONAL EXPERIENCE
1/2002 – 8/2009
GODESIGNS LLC
Missouri City, Texas
Project Manager/Estimator/Designer:
• Pre purchase estimations for HVAC, Electrical, Mechanical, Plumbing and Structural demolition and repair.
• Purchased homes for rehabilitation, lease and resale.
• Create hard bid of Time and Materials for budgeting, purchasing of materials and receiving of quotes for hiring contractors.
• Responsible for heavy coordination of construction projects to include Electrical, HVAC, Mechanical, Plumbing and
Structural with vendors, contractors, financial institutions, employees, and business partners.
• Successful Estimation, Design and construction of remodeling and new construction of single and multi family residences.
•Successful Estimation, design and coordination for Fire Protection, Plumbing, Electrical, Civil/Structural and HVAC for repair,
demolition, additions and new construction of Commercial, Industrial and Institutional facilities.
• Use of Timberline for Estimating and Project Management.
• Started out with business with nothing and ended up with a portfolio of approximately $3,500,000 within my first year of
business.
• Designs and as-builts were drawn in AutoCAD versions 2000 through 2006.
• Worked with vendors for purchasing materials, contractors for labor, projects managers and engineers for Coordination of project
completion.
Gregory A. O'Neal (cont):
5/2001 – 5/2002
AB & PALUMBO ELECTRIC
Worcester, Massachusetts
Electrical Project Manager/Estimator:
• Complete Estimating and Bidding of Public Buildings, Medical Institutions and Schools for Electrical Construction Projects
ranging from $200,000 to $65,000,000 in size.
• Responsible for Conceptual Design and Coordination of Construction from start to finish, including Manpower, man hours,
Safety Policies, Standard Procedures, Project Budgeting and Tracking, Progress Reports to Clients, Contract Preparations and
Negotiations.
• Successful coordination between trades, clientele, crews and employees as I attended all meetings concerning projects.
• Layout and Drafted Duct Bank Plan, Site Plan, Civil Plan, Cable Tray, Conduit, Fire Alarm System, Audio/Video System and
Security Systems for Demo and New Installations.
• Performed Calculations and Schedules for Lighting, Conduit and Wire Sizing, Motors, Power, Generators, Panels with Breakers,
Main Distribution and Transformers.
• Updated and changed Architectural, Electrical and HVAC drawings for Progress, Construction and as required.
• Estimating software used for bidding was Bid Buster, Visions and McCormick.
• Responsible for Document Control of Drawings, Purchase Orders, Specs, Catalogues, Estimates, Change Orders, RFI's,
Proposals, Shutdowns and Scheduling of Manpower, Man Hours and Loads and various types of Project Coordination
documentation
• Estimations of complete Security, Fire Alarm, Audio/Video, Telecommunications, Substations, Motor Controls and Electrical
Systems.
• Sketched and drafted Wiring Diagrams, P&ID's, Loop Diagrams and All Individual Systems Diagrams.
• Software used for layout, design & drafting was AutoCAD 14 thru 2002.
6/2000 – 5/2001
COASTAL ELECTRICAL & MECHANICAL
Lakewood, Washington
Electrical Project Manager/Estimator:
• Complete Estimating and Bidding of Public Buildings and Government Facilities for Electrical Construction Projects ranging
from $10,000 to $2,500,000 in size as well as inspecting work being done and led crews in their daily work.
• Responsible for Conceptual Design Coordination of Construction from start to finish, including Manpower, man hours, Safety
Policies, Standard Procedures, Project Budgeting and Tracking, Progress Reports to Clients, Contract Preparations and
Negotiations.
• Successful coordination between trades, clientele, crews and employees as I attended all meetings concerning projects.
• Layout and Drafted Duct Bank Plan, Site Plan, Civil Plan, Cable Tray, Conduit, Fire Alarm System, Audio/Video System and
Security Systems for Demo and New Installations.
• Performed Calculations and Schedules for Lighting, Conduit and Wire Sizing, Motors, Power, Generators, Panels with Breakers,
Main Distribution and Transformers.
• Updated and changed Architectural, Electrical and HVAC drawings for Progress, Construction and as required.
• Estimating software used for Electrical was Conest and Means.
• Responsible for Document Control of Drawings, Purchase Orders, Specs, Catalogues, Estimates, Change Orders, RFI's,
Proposals, Shutdowns and Scheduling of Manpower, Man Hours and Loads and various types of Project Coordination
documentation.
• Estimated complete Security, Fire Alarm, Audio/Video, Telecommunications, Sub Stations, Motor Controls and Electrical
Systems.
• Sketched and drafted Wiring Diagrams, P&ID's, Loop Diagrams and All Individual Systems Diagrams.
• Software used for layout, design & drafting was AutoCAD 14 thru 2000.
• Assist Mechanical Department in Design and Coordination of HVAC Construction, Estimating using Timberline Software.
Gregory A. O'Neal (cont):
11/1990 – 6/2000
VOLT SERVICES GROUP
Seattle, Washington
Project Engineer/Estimator:
• Design and layouts of the routing of Electrical Conduits, Cable Tray, Lighting, Power Distribution for Security, Audio/Video,
Telecommunications and Fire Alarm Systems for Demo and New Installations.
• Drafted loop diagrams, wiring diagrams, panel schedules and calculations, as-built and coordination drawings.
• Updated and changed Electrical, Architectural and HVAC drawings for Progress, Construction and as required.
• Performed Calculations and Schedules for Lighting, Conduit and Wire Sizing, Motors, Power, Generators, Panels with Breakers,
Main Distribution and Transformers.
• Interfaced between trades and employees for installation of electrical systems.
• Answered and wrote RFI’s and change orders and other correspondence concerning shutdowns and other miscellaneous tasks.
• Completed take-offs and estimating of conduit, wiring, lighting, and devices.
• Responsible for site layouts of sewage and water piping with their elevations, locations and routing.
• Updated and changed Architectural and HVAC drawings.
• Estimating software used was Accubid.
• CAD software used was AutoCAD 14 & 2000.
• Responsible for Document Control of Drawings, Purchase Orders, Specs, Catalogues, Estimates and various types of Project
Coordination documentation.
CAD Manager/Electrical Designer/Drafter (Contract Employment):
• Responsible for Electrical and Mechanical Machine Design of Conveyors systems, process machinery and automated machinery.
• Responsible for Machine Design of multiple rotating parts including gears, pulleys, motors, shafts and conveying assemblies.
• Responsible for Electrical design and placement of powering up of equipment and 3D modeling and prototyping of components
such as motor control panels, circuitry, disconnects, safety emergency stops and control stations and Telecommunications
products.
• Used Pro/E/19, ACAD/14 & 2000, SDRC I-DEAS, ISO.
• Responsible for site layouts of sewage and water piping with their elevations, locations and routing.
• Managed Document Control of Drawings, Purchase Orders, Specs, Catalogues, Estimates and various types of Project
Coordination documentation.
Structural Designer/Detailer (Contract Employment):
• Designed and Detailed columns, beams and joists for construction of Commercial Buildings, framing for Conveyors and Heavy
Machinery.
• Types of framing used included: catwalks, trusses, hoppers, bins and support systems.
• Defined metal type and weld.
• Provided installation process and maintenance specifications.
• Provided Foundation Anchor Bolt layouts, Grids, Site, Elevations, Sectional and Plan Views.
• Responsible for layouts for Site Plans and Environmental Control Documentation.
• Software used was Microstation, Strucad and AutoCAD versions 13 and 14.
• Client and Vendor contact for design and price changes.
Gregory A. O'Neal (cont):
Machine Designer (Contract Employment):
• Designed and Drafted Automated Process Machinery for the Pulp and Paper, Consumer and Construction fields.
• Complete Demo and Rebuild of Manufacturing Facilities to include Fire Protection, Mechanical, Electrical and Plumbing.
• Responsible for Designing, 3D modeling, prototyping and picking of gears, pulleys, motors, bearings, shafts, housings and
mounting.
• Defined metal types and welding specifications.
• Provided installation process and maintenance specifications.
• Responsible for Motor Controls and Instrumentations design and drafting of wiring and loop diagrams.
• Software used was AutoCAD versions 12 thru 2000, used PRO/E, SDRC I-DEAS, ISO.
• Client and Vendor contact for design and price changes.
Mechanical Designer (Contract Employment):
• Design, Drafting and Development for Engineering of Mechanical parts for Medical Instrumentation/Devices,
Telecommunications Systems, IC Test Fixtures & High Tech Equipment, Heavy Machinery, Mining Equipment, Rock & Quarry
Equipment, Olympic Competition Bikes and Computer Power Systems.
• Designed in 3D modeling for the prototyping and final design of Plastic Mold Injection and various metal parts.
• Provided Assembly process and specifications.
• Software used was AutoCAD versions 12 thru 2000 with modeling performed in PRO/E packaged with PDM/Intralink and SDRC
IDEAS.
• Used ECO/ECN to incorporate design and drawing changes.
• Provided Company set-up of standards for drawings and documentation procedures.
• Client and Vendor contact for design and price changes.
• Led a Document Control Department in how documents are numbered, filed, titled and routed, as well as procedures in
ECN/ECO/PDCN.
Architectural/Civil Drafter (Contract Employment):
• Designed and Drafted residential homes.
• Responsible for street layouts for plan profile and cross sections of piping along with locations of street intersections, traffic
signals, manholes and buildings.
• Responsible for construction set of drawings to include Site/Plot, Foundation, Wall Sections, Fire Protection, Fire Alarm,
Security, Audio/Video, Electrical, Plumbing, Roofing and Elevation Plans.
Gregory A. O'Neal
Years of Experience: 9 years in Electrical Estimating and Design.
10 Years in Electro-Mechanical Engineering/Design
3 Years in Architectural/Structural Design and Drafting
Brief Background: Greg has worked in Engineering and the Construction arenas as an Electrical Project
Manager/Estimator, MEP Estimator/Designer, Electrical Designer, Mechanical Engineer,
Electrical/Mechanical CAD Designer, Structural Designer/Detailer, Architectural
Designer/Drafter and Project Engineer. His Experience ranges from demo and rebuild to
plant operations of electrical installations of new and existing equipment, as well as
Building and plant upgrades. With his experience, communication skills and team
orientation, Greg is quite prepared to assist in Project Management and succeed in
completing challenging projects.
Notable Project List:
Microsoft AFEC
Redmond, Washington Orangeburg, SC
Building Electrical Upgrades Entertainment Center
$13,000,000 (Upgrade Electrical) $1,500,000 (New Electrical)
Roseville Mall Palm Square
Roseville, California Austin, TX
Phases 1 & 2 New Retail Mall Retail Stores
$6,000,000 (New Structural) $350,000 (New Electrical)
McChord Air Force Base AFEC
Tacoma, Washington Entertainment Center
Gymnasium Remodel Deming, NM.
$50,000 (Electrical Upgrades) $1,300,000 (New Electrical)
McChord Air Force Base AFEC
Tacoma, Washington Entertainment Center
Hangers 1&2 Repair Copperas Cove, TX.
$410,000 (Electrical Upgrades) $1,750,000 (New Electrical)
McChord Air Force Base AFEC
Tacoma, Washington Entertainment Center
Vet Clinic Bastrop, TX.
$150,000 (Electrical Upgrades) $1.250,000 (New Electrical)
Lakewood City Hall Walgreens
Lakewood, WA. Pharmacy/Store
$3,500,000 (New Electrical) Houston, TX.
$150,000 (New Electrical)
Leominster High School Walgreens
Leominster, MA. Austin, TX.
$4,000,000 (New Electrical) Pharmacy/Store
$150,000 (New Electrical)
Leominster Fire Station
Leominster, MA.
$1,100,000 (New Electrical)
Gregory A. O'Neal
Notable Project List (Cont.):
UMASS Memorial Medical Center Ford Motor Company
Worcester, MA. Detroit, Michigan
$2,000,000 (New Electrical) Plant Electrical Installation
$2,300,000 (Remodel Electrical)
Marlborough Hospital Addition ITT Rayonier
Marlborough, MA. Shelton, Washington
$800,000 (New Electrical) Plant demo and rebuild
$4,600,000 (MEP)
Framingham High School McChord Air Force Base
Framingham, MA. Tacoma, Washington
$4,500,000 (New Electrical) Pub & Deli
$10,000 (Electrical Upgrades)
Southborough High School McChord Air Force Base
Southborough, MA. Tacoma, Washington
$6,000,000 (New Electrical) Kitchens & Dorms
$15,000 (Electrical Upgrades)
McChord Air Force Base
Tacoma, Washington
Generator Installation
$250,000 (New Electrical)
Contact this candidate