Project Manager Quality
Resume:
Alberto Matos Rodriguez
PO Box ***** Suite *** Hatillo, Puerto Rico 00659
*************@***.*** http://www.linkedin.com/in/albertomatos
http://albertomatos.org
World traveled group leader with 41 years of experience providing
management support for Maritime, DOD and civilian contract projects.
Extensive hands-on experience in marine, power, potable water and telephone
utilities, pharmaceutical, communications, security and fire control,
rotary and stationary equipment maintenance and repair Familiar with
required industry standards
URS Washington Division Experience
Quality Engineer (Unrestricted Access)-Exelon Nuclear
ANSI N45.2.6 Certified level II Electrical, Instrumentation and Controls
Steam Generation Team (SGT, LLC), TMI, PA
8/09 - Present
Ensure that QA audit/surveillance activities performed are in accordance
with applicable Quality Execution Procedures. Responsible for verifying
that the Work Packages being utilized in the field to direct the work are
being properly maintained and that the Work steps are being followed in
accordance with Quality Execution Procedures. Perform General Surveillance
and review of Document Control, Material and Equipment Control,
Housekeeping, Foreign Material Exclusion, Rigging and Handling, Welder
Qualification, Weld Filler Metal Control and Documentation, Weld pre-post
heat treatment, Preventative Maintenance, Test Equipment, Work Packages,
Receipt Inspection, Identification and Control of Deviations, Cutting and
Machining, ALARA, Safety, Lockout / Tagout, Concrete Testing and
Preparation, Grouting, Support and Structural Steel Installation. Technical
Reviewer for accuracy of Work Package closure, including Hold Points, NCR,
DR, WPCN, Surveillance Rejects, Master Index, Referenced Documents,
signature log and DIL verifications.
Quality Manager-Fossil Fuel Oil
Rust Constructors Inc. - Exxon Mobile, CO
9/08 - 8/09
Assume the functions of the company's quality onsite representative and
performed several different duties as directed by the Project Manager.
Created, implemented and maintained an MS Access database as per Rust
Quality Systems. Responsible for the surveillance inspections of
electrical, instrumentation, storage tanks, structural & reinforcing steel,
forms, cast-in-place concrete placement, equipment and structural grout
placement and over/underground piping & support, surface treatment and
coating applications. Performed final inspections and verified
documentation for package closure.
Quality Manager-Puerto Rico Electric Power Authority (AEE)
Rust Constructors P. R. Inc.-Toa Baja, Puerto Rico.
1/08 - 9/08
Assume the functions of the company's quality onsite representative and
performed several different duties as directed by the Project Manager.
Responsible for the surveillance inspection of ABB & GE electrical
generators refurbishment and repair, reinforcing steel installation, forms,
cast-in-place concrete and duct banks, equipment and structural grout
placement. Inspected surface treatment and coating application of
structural steel, piping, and refurbished equipment
Quality Manager-Puerto Rico Electric Power Authority (AEE)
ASQC Q9001:2000 ABS Certified Quality Program
Rust Constructors P. R. Inc.-Puerto Nuevo, Puerto Rico
8/06 -12/07
Responsible for executing quality surveillance of Electrical,
Instrumentation and Controls construction disciplines. Witnessed/ verified
mandatory hold points for steam turbine, combustion turbine, and auxiliary
equipment including duct banks and conduit structural support systems.
Progressed from quality inspector to quality manager and assumed the
functions of the company's quality onsite representative, also performed
several different duties as directed by the Project Manager. Coordinated
and evaluated all quality activities performed by the company and
subcontractors. Helped provided training to site personnel and
subcontractors regarding the implementation of the Site Quality Program. On
this project, the Quality Department was nominated for the 2006 Corporate
Lion Award, for performance excellence.
Project Manager-MEP
GJL Contractors-Island-wide, Puerto Rico
9/05 - 8/06
Performed pre bid walk-downs, takeoff, estimating and prepared proposals
for multi-disciplined construction project. Prepared detailed project
scope, site logistics plan, QA plan, safety plan, managed project budget.
Performed quality and safety audits of self-performed and subcontractors
work.
Electrical Supervisor-Puerto Rico Port Authority (AEE)
Bermudez and Longo Electrical Contractor, Puerto Rico
5/04-9/05
As a management member of the Special Projects Division, I was responsible
for inspecting, reviewing and auditing work in progress to ensure that the
workmanship conforms to specifications and adheres to construction
schedules. I instructed and provided support for the total quality control
and safety of all electrical and mechanical installations throughout the
project.
Project Manager-Pharmaceutical Process Control Instrumentation
Omni Instrumentation Services Inc.-Wyeth, Puerto Rico
4/01-5/04
Prepared detailed site scope, site logistics plan, QA plan, safety plan,
chaired subcontractor coordination meetings. Performed quality and safety
audits and inspections of self-performed or subcontractors work for
compliance with contract specifications. I maintained a calibration station
traceable to NIST. Developed electrical and instrumentation personnel to
perform instrument installations, calibrations and maintenance.
Lead Instrumentation Technician-Puerto Rico Water Authority (AAA)
Thames Water P. R. Inc, Super Aqueduct, Puerto Rico
3/98-4/01
Duties included identifying, purchasing and maintaining test standards and
consumables for potable water and quality sampling stations along a 35 mile
service interconnection pipe. Prepared and submitted for approval the
Standard Operating Procedures (SOP) for the calibration of all plant and
substation instrumentation that maintained water quality standards set by
the EPA, NCID, CDC and FDA-GMP.
Installation Supervisor-Puerto Rico Power Authority (AEE)
Bermudez and Longo-Cambalache, Puerto Rico
4/97-3/98
Responsible for the Power Island interconnect cabling, control
instrumentation wiring and terminations on three ABB oil fired Gas Turbines
type GT11N1 (82 Mw and associated fuel storage and forwarding system,
dematerialized water system and plant DCS system. I performed Start up and
commissioning duties under the direction of the ABB Commissioning Manager
Instrument Technician- Pharmaceutical
Instrumentation Services Inc-Island wide, Puerto Rico
12/94-4/97
I performed pharmaceutical and construction Installation, calibrations,
service and repair of biomedical, analytical and process control
instrumentation. I manufactured, installed and tested process control
panels and equipment racks using specifications manuals, operational
manuals, schematic drawings, wiring diagrams.
QMED Chief Electrician, U. S. Merchant Marine, Military Sealift command
Desert Storm/ Desert Shield-Awarded the Merchant Marine Expeditionary
Medal
Department of the Navy-Secret Clearance
1/87-9/93
Responsible for the maintenance and repair of all electromechanical system
to combat ready conditions. Performed daily visual and functional
inspections of equipment to diagnose actual and potential malfunctions and
identify root causes of failures on pressure vessel, mechanical, pneumatic,
hydraulic, electrical, electronic, navigation and positioning equipment
propulsion and auxiliary machinery systems. I performed scheduled and
unscheduled quality Inspections and Audits of vessel systems and equipment
according to the 46CFR C1 Subpart F, Civilian Quality Management System and
NAVSEA Standards.
Work History for 8/79 to 1/87 upon request
Instructor-Electrical/Bookkeeper/Associate Professional
OIC/NY-New York City BD. of ED., New York
12/75-8/79
I prepared course curriculum, lesson plans, shop materials, proctored daily
shop class, tested, graded and counseled high school student for the
Brooklyn school district in New York City. I gave instruction for the (FCC)
Third Class Radio Telephone Operators Permit. Bookkeeping responsibilities
include, preparing financial statements, balance sheets, financial reports,
journal entries, general ledger, invoicing, bill paying and petty cash. I
processed the payroll, reviewed and balanced time and attendance details. I
responded to staff questions and resolved payroll issues.
3rd Index Central Office Equipment Installer
Western Electric Co.-NYC Telephone Co, New York
8/70-10/75
I prepared and executed Methods of Procedures (MOP) using handbooks, floor
plans, assembly, equipment and wiring drawings to install Central Office
telecommunications Equipment and Electronic switching service (ESS)
equipment for the New York Telephone Co. Analyzed and performed complex
wiring operations, tested and verified timing, fusing, load, power supplies
and bus continuity. I installed AC and DC power plant equipment with
auxiliaries such as ring, busy tone, and talk voltage generators. I
installed main bus bar for power distribution systems between floors to the
respective equipment racks. Calibrated and serviced Automatic Master Test
Frame, master timer frames, automatic test frames, rotary sequence
switches, D. C. motors and clutches used on # 5 Crossbar Switching systems.
Chief Electrician, U. S. Merchant Marine, Military Sealift command
Viet Nam -Awarded the Vietnam Service Medal
Department of the Navy-Secret Clearance
5/66-8/70
Responsible for the maintenance and repair of all electrical and mechanical
system to combat ready conditions. Performed daily visual and functional
inspections of equipment to diagnose actual and potential malfunctions and
identify root causes of failures on vessel mechanical, pneumatic,
hydraulic, electrical, electronic, propulsion and auxiliary systems.
Performed scheduled and unscheduled quality Inspections and Audits of
vessel systems and equipment according to 46CFR C1 Subpart F, Civilian
Quality Management System and NAVSEA Standards.
Professional Certifications
o ANSI N45.2.6 Certified level II Electrical, Instrumentation and Controls
o CFR 46-QMEDANYRATING
o Instructional Aide, NYC Department of Education
o Radio Telephone Third Class Operator Permit (FCC)
Education
US Merchant Marine Endorsements:
o Entry rating program Engineering, 1966
o Fireman, Watertender, Oiler, Lifeboat, 1967
o Electrician, Deck & Engine Utility man, 1968
o QMED Electrician, Refrigeration Engineer, Junior Marine Engineer, Deck
Engineer, Pumpman, Machinist, Propulsion systems Maintenance, Cargo
Operations, 1988 Paul Hall Center for Maritime Training
o Marine Fire Fighting Course, 1988 Military Sealift Command
Certificate Programs
o Industrial Electricity, 1975 Opportunities industrialization Center
o Labor Law Studies Program, 1975 Essex County College
o Manpower Services for Disadvantaged and unemployed youth, 1976
Opportunities Academy of Management Training
o FCC 1st Class License Preparation, 1977 Announcer Training Studios
o CESD Equipment Training Program, 1980 Eastman Kodak Company
o Mechanical & Pneumatic Instrument, 1982 The Foxboro Company
o Pneumatics Controls, 1984 Barber Colman Company
o Qualified Member engineering Department Any Rating, 1988 Seafarers school
of Seamanship
o Marine Fire Fighting Course, 1988 Military Sealift Command Fire Fighting
School
o Refrigerated Container-Advanced Maintenance, 1989 Seafarers school of
Seamanship
o Refrigerated Systems, Maintenance and operations, 1989 Seafarers school
of Seamanship
o OSHA 30 Hour, 2006 OSHA Construction Industry Outreach Program
o Medium Voltage Cable Terminations and Splice, 2007 Tyco Electronics-
Energy Division
o Welding Inspection, 2008 American Welding Society
o Safety trained Supervisor, 2008 CCHEST
Military Awards-Civilian Service
Vietnam Service Medal and bar
Desert Storm/ Shield
o Expeditionary Certificate, Service Medal and bar
o Service Recognition Certificate by Commanding Oficer USNS Chauvenet (T-
AGS-29)
Professional Affiliations
o ASNT
o PMI
o ISA
o ASQ
o AWS
o CCHEST
Skills
o Fully bilingual English /Spanish
o Familiar with Autocad
o MS Office Suite, MS Project
o Proficient with test methodologies
Contact this candidate