Engineer Technician
Resume:
HIEU DANG
BALTIC STREET
SAN
DIEGO, CA ***11
Tel.: H 858-***-****
***********@*****.***
OBJECTIVE : Seeking a position as an Final Test Tech, or Test
operator.
(ATE or SCRIPTS automated by computer program with power bench
set-up)
Electronic/ Mechanical Assembler or Rework.
QUALIFICATIONS :
* Know how to read and work with Schematics,
Drawing and BOMs.
* Hands-on experience in soldering skill and
reworking SMT parts, and Through-hole parts.
* Know how to build or repairs Electronic panel,
Cable harnesses and Cable Probes following wiring
diagram or drawing.
* Know how to operate all kinds of hand tools and
test equipment such as Oscilloscope, Spectrum
Analyzer, Function Generator, DVM.
* Hands-on experience in soldering under
microscope.
* Know how to use Microsoft Word and Excel.
EXPERIENCE :
09/09 to 02/10 MOTOROLA, INC
San Diego, CA 92121
Home & Networks
Mobility/Prototype Mover Boards (Xco3soc)
Software Test Technician
2/Assembler (Design Lab)
* Program the Firmware to IC
SPI Flash (U-boot) of new Mover boards
Written, Reading program and
check Configuration Data. Using automated
test scripts software program.
* Program Encrypt Kernel on Mover boards, and
verifies after done program.
* Install USB key with Engineer software into
Mover USB, and command
to console window follows by Engineer
instructions or daily task sheet (Use Linux or
window) or installs software update in product
require.
* Test Uses Cases with the Home & Network set-up
(DCX-HDMI, Netopia
Motorola Router, Mover board, iPod Touch or Android
phone).
* Work closely with development team, program
automation or test scripts use Linux or Windows
based applications.
* Perform tests and provide
test results or software problem to Engineer.
* Swapping the Mover board to
the difference set-up to test and compare results
* Format SD Cards reader into
USB on Linux system.
* Rework Mover board after
find down the problem, also solder and built-
up the Mover boards LED under
Microscope follows schematics.
* iPod Touch Application Installation.
* Use iTune to update the OS ( Operating System )
on new iPod of the latest version, running on a PC
to update the OS.
* Load the MoverApp to the iPod Touch devices and
download IPRM certificates ( Bring up Xcode on Mac
Mini machine Tool ) Organized and Device ID in sync,
copy and add each device to the development device
list and identifier then submit and register to
developer account.
* Reload the MoverApp to the iPod, after Test
uses cases completed for ready to
the next test.
* Built-up the COAX cable, modifies DCX cable.
Operate power tools to modify or mechanical job.
09/08 to 02/09 KYOCERA WIRELESS Corp., La Jolla,
California
Lab Test Technician ( SCRIPTS
PROGRAM)
* Test and Configure power and sensitivity of
Cell phones by Market Channels for customers
order. LOW-MID-HIGH, Dual band and Tri band. CELL,
PCS and AWS by Test Scripts program or manually
adjusted by using Chamber Station, AL 4806-3A
Positioner, Controller & PCU, Rohdes-Schwarz CBT
Blue-Tooth Tester, Agilent 8960 wireless
communication test, 8541 Power Meter, Power Sensor,
National Instruments NI-PXI 1042 and Test Box.
* Conducted test, (manual test) if the phone
failed production test.
* Run configuration software test, to check
hardware information, model, and firmware version
that are loaded to phone using PC and Kyocera
specific software application.
* Know how to use IC programmer to load firmware
to micro-controller, software upgrade to phone after
rework.
08/06 to 08/08 SONTEK/YSI Corp., Sorrento Mesa, San
Diego, California
Lab Technician/Assembler (
Electronic & Mechanical )
* Built and tested and reworked the Surface
water, Oceanography, Laboratory, Ports/ Harbors and
Navigations, Water Velocity and Flows product lines,
following drawing, instruction and BOM.
* Performed Leak test, Pressure test, Burning
test and Final test with Lab equipments and computer
program.
* Reworked test units for customer returned or
upgrade with new software and/or new hardware (news
PCB, transducers, electronics wire and news
connector).
* Built special and miniature coax cable harness,
cable probes follows wiring diagram, layout
components and built up the housing of product
following engineering drawing, and instructions.
* Perform continuity check and inspections after
completed assembly or mechanically jobs. Knew how to
operate all kinds of hand tools and test equipments.
* Test and troubleshoot the productions
electronic PCBs down to component level.
03/98 to 05/03 REMEC, Inc., San Diego, California
Final Test Technician of
Microwave RF filters (ATE Program)
* Assisted design engineer during the development
of new products.
* Tested and completed the RF filters with
Temperature Hot-plate and collect data for
engineering during design phase and manually tested
prototype with test equipment such as: Spectrum
Analyzer, Network analyzer, Oscilloscope, DMM, Power
Meter, Power Sensor.
* Knew how to calibrations and set-up the
equipments to follow the instructions/procedure.
* Reworked or built the RF filters with Hot-plate
and under Microscope. Knew how to built and modifies
the fixture of use for tuning.
12/94 to 02/97 INTERGRATE MICROWAVE Corp. ( IMC ), San
Diego, California
Test and Machine Operator.
* Operated Laser machine to cut the cupboard
filters with computer program.
* Test filters and solder reworked for Tech &
Engineer.
10/92 to 11/94 LIEN ENGINEERING Corp., San Diego,
California
Test Technician/Assembler
* Performed final test on power supply product
using power-bench test fixture and computer program
to collect data.
* Reworked and tested units for customer return
by work instructions.
EDUCATION & TRAINING :
A.S. Degrees, June-2006, Major: Automotive Technology.
Miramar Community College, San Diego, California
Certificate of Electronic Test Technician @ City Community
College.
PERSONAL REFERENCES:
U.S Citizen.
Confidential Clearance (expired)
Contact this candidate