Manager Sales
Resume:
Patrick-Henry J Nash
Phone / Fax: 203-***-****
Stratford Ct, 06615 Cell:
E-mail:
****@*********.***
Objective: To obtain a position with a company in which I can enhance
both my employer's efforts and my career in the quality assurance
field. This would be accomplished by utilizing the experiences I have
accumulated through my hands on auditing, calibration, documentation,
inspection, general quality and testing knowledge.
Professional Experience:
August 2007- Sikorsky Aircraft division Of United
Technologies Corp.
August 2008 6900 Main Street
Stratford Ct, 06615
Title: Inspector Core Precision Components
Responsibilities:
Inspection of precision machined aircraft components too company
blue print and quality standards.
Inspection methods include the use of hand tools (calipers,
micromrters, and thread gages) company gauging and visual
inspection as required by the work order operation.
Review of the operation needed to be checked on the work order that
is reprehensive of the components(s).
Determine if the components are discrepant or compliant to said
blue prints and quality standards.
Process the paperwork and components that are determined to be
compliant and move them on to the next operation.
Write discrepancy reports via the companies DR system using the
Solumina tracking system.
October 2006 -
March 2007 Reliable Tool & Die, Inc
435 Woodmont Road
Milford Ct, 06460
Title: Quality Manager
Responsibilities:
Determine and review in house operational procedures & policies for
over all qualification of ISO 9000:2001 auditing and qualification.
Adjust associated paperwork and files to reflect any changes made
to any of the Operational Procedures.
Interacted and participated with Auditing personnel in Reliable
Tool & Dies requalification for ISO 9000:2001 in December of 20006.
Responded and corrected any "minor" discrepancies found during the
RTD ISO auditing event.
Document customer complaints, implementing corrective actions and
product alerts concerning non-conforming product for product
shipped or raw material received. Process incoming raw material and
coordinate inventory for use in internal manufacturing processes.
Perform calibration on measurement tools in which critical
measurements where used by these tools. Determine which gauges
where to calibrated in house and which where to be qualified by
outside sources. Track, document, schedule and maintain the over
all calibration system @ RTD. Keeping each of the above in
accordance with the ISO 900:2001 protocols. That applies to them.
Over saw a staff of 3 Inspectors who preformed 1st piece, 1st
Article, Inprocess and Final Inspection of close tolerance machined
and stamped metal products. Assisted in the revision and updated
operational procedures and or equipment as they pertained to
quality measurements or gauging issues that determined acceptable
or reject able product on a daily basis.
Assisted management and manufacturing teams in a continuous
improvement effort to enhance the Q.A. system @RTD.
July 2006- Verify - Vendor Surveillance Company
October 2006 16775 Von Karman,
Suite 150
Irvine, CA 92606-4918
Title: Technical Specialist
Responsibilities:
Vendor Qualification
Perform independent auditing of Lockheed Martin Aeronauts Company's
(LMC) Supplier Tooling requirements. This was to determine if the LMC
vendor had a quality system in place the adhered to LMC'S TMS-MC-015
Tool Manual for periodic inspection and variation of tooling used to
produce and qualify components for shipment to LMC Fort Worth Texas.
Auditing findings were reported back to LMC via online databases and
administrative corrective reports to vendors when and where they were
deemed needed.
September 1990- United States
Surgical Tyco Healthcare
October 2005 195 McDermott Road
North Haven Ct, 06473
Title:
Senior Metrology Technician
Responsibilities:
Performed 1st article,1st piece, and non-routine inspections of
molded plastic, stamped, formed or cast metal parts. These
verifications were performed using non-contact video inspection
systems (RAM optical, OGP Smart Scope, Nikon Tool scopes), surface
plate lay out inspection and standard inspection hand tools. These
geometric measurements adhered to the latest GD&T techniques and
callouts for the medical industry. Hardness & Micro-Hardness
testing using Wilson / Rockwell Series 500 hardness tester and
Wilson Tukon 200 series micro-hardness tester.
Using the above mentioned inspection techniques, on line and
quality area gauging were measured to insure a quality and safe
surgical instrument manufacturing environment. This also included
qualification of various measuring systems. Includes with these are
a super micrometer, Laser micrometer and Federal ID-OD ring gauge
checker.
.
Developed and implemented of an in house load/force calibration
program to meet ASTM, NIST & ISO 9000:2001 requirements for all in
house universal material testing systems. This included the
monitoring and up keep of both electronic and dead weight
standards. Replacing or repairing these standards when the
circumstances were called for. Recorded, Documented and Retained
the calibration data fore ach standard, test system and the
transducers used on that test system to meet FDA and ISO auditing
criteria.
Developed and implemented all non-routine testing for components,
sub-assemblies and fully assembled surgical devices. Materials
tested include various types of stainless steel, titanium and
aluminum alloys. As well formed plastic and polymer samples.
Developed test methods, techniques and custom testing systems for
all of the company's wound closure lines. These responsibilities
included contacting vendors, writing purchase orders and
interacting with vendor support when needed.
Coordinated and documented the companies' material testing methods
in all Q.A., Manufacturing, and R&D areas to ensure repeatable and
reproducible test data and methodology between the fore mentioned
areas. Was an assist in the IQ / OQ process to validate each test
system and software version used on each piece of testing
equipment. Extensive he latest Instron and MTS material testing
software versions presently on the market today. As well as older
versions still in use through out the industry.
December 1986- Norden Systems A Division of Untied
Technologies Corporation
July 1990 1
Norden Place Norwalk Ct
Title: Electrical Inspection Technician
Responsibilities:
Perform functional testing of electrical and electromecheanical
assemblies. Assure compliance of instruments, component, production
units and purchased subassemblies to military standards. Document
test and inspection data as it relates to quality and manufacturing
trends.
These testing tasks where performed with the use of the following
test systems. Tektronics S-270 & D 3220 integrated circuit test
systems, LTX, CP80 linear semiconductor inspection station, Eaton
Impact II diode, and transistor & LED test qualifier.
Education: Joseph A Foran High School, Milford
Ct 0646
9/77 - 6/81 Graduate: Math, Science, and
Electronics
9/83 - 6/85 Porter & Chester Institute,
Stratford Ct, 06614
Graduate Certificate in Computer
Electronics Technology
Other Training: Use of PC"S running Microsoft Office programs
utilizing Windows XP, 2000, NT & 3.1 platforms. The above were
used to develop and implement specialized servo-mechanical
inspection systems
Special interests: Bicycling, Weight Lifting, hiking, Certified
STAR 3 SPINNING (indoor cycling) instructor (JGSI # 53477)
Favorite Phrase:
Take a disadvantage and use it to you advantage.
(Lance Armstrong 7 Time Tour de France Champion: The Book "It's
not about the bike")
References:
Jay McGuinness Jonathan Fazli
Scott Hennon
MTS Corp. HMB Inc. Memry
Corp.
Regional Sales Manager Regional Sales Manager
Quality Manager
24 Royal Street 19 Bartlett Street 3
Berkshire Blvd
Quincy MA, 02170 Marlboro MA, 01751
Bethel Ct, 06801
1-617-***-**** 1-617-***-**** 1-203-
739-1138
Contact this candidate