Mechanical Engineer
Resume:
ANTOINE DOAN
Quincy, MA **169
(C) 781-***-****
Email: *******@*****.***
SKILLS
Familiar with Electronic and Optical Equipment: HP Roadrunner, (HP & Wiltron) Network analyzer, (HP)
Oscilloscope, (HP) Sweep Generator, (HP) Function Generator, (HP)Analog/Digital Multimeter,
(HP)Signal Generator/Frequency Counter, and (HP and Ando) Optical Spectrum Analyzer. Ecrisson and
Fujitsu Fiber Optics Splicers. Mechanical Fiber Splicer. Lucent certified in Fiber Optic Installation Training
Program, such as Splicing, Connectors Assembly and Testing. Knowledgeable of Microsoft: Word, Excel,
Power Point, and Access. Windows 7 and XP. Design software: Microsoft Visio and Design CAD 3D Max
18. Oracle.
Excellent Solder Skills and familiar with Blue Prints and Schematic.
Knowledge of using basic hand tools and inspection tools (torque screwdriver and wrenches, wire
strippers and crimpers, calipers, and vernier.
Bilingual:(Vietnamese & English)
EXPERIENCE:
BAES SYSTEMS, INC.
LEXINGTON, MASSACHUSETTS
Technician April 2008 to Dec. 2009
Perform ICT test thermal sights by using latest software to kill pixels. Also, check for failures
•
such as row/column noises, vertical bands, spot, and specs.
Perform Pre functional and post functional test to verify that sights is operating within customer
•
specs.
Perform Acceptance Test (ATP) and Gain test on thermal sights to assure it meet customer
•
standard.
Perform a Multi Setpoint/Thermal ESS test of thermal sights and functional test to assure that it
•
operates flawlessly.
Operate an automated Thermotron chamber for environmental test. And to assure that unit are
•
working according to customer's specs.
Perform an Environmental System Set (ESS) Vibration and Gunfire Shock ESS testing of a
•
TWS sight assembly.
Analysis of data collection during Environmental Test. Communicate with Engineers when
•
there's a problem.
Mechanical assembly of thermal sight products by using torque powerdrill.
•
GENERAL DYNAMICS
TAUNTON, MASSACHUSETTS
Technician Oct. 2006 to April 2008
Perform Incircuit & Bist test of communication cards for shorts & open by using the HP3070 to
•
make sure the cards operate correctly.
Program & sanitize cards by using HP3070 Road Runner system.
•
Test and troubleshoot communication components. Repair and debug rework components.
•
Perform Functional test of communication racks such as Sun Microsystems Sparc & Solana
•
servers, and Cisco routers according to customer specs.
Install, maintain, repair, and modify various types of equipment ranging from 10base T hubs and
•
concentrators to 100base T Ethernet switches.
Experience with machine tools such as lathe, and drill press. Experience with basic hand tools
•
such as drills, torque screwdrivers, dremel tools, tap and die.
Functional test of Cisco routers, Sun Microsystem SPARC servers, and Power Modules/
•
Supplies.
Perform a PAT test of LEM, PM, DSM, & CSM to assure the system work properly.
•
Install software into servers and configure the correct IP address for the system.
•
Security Clearance.
•
TEXAS INSTRUMENTS
STAFFORD, TEXAS
Test/Manufacture Specialist Nov. 2005 to Aug. 2006
Responsible for the set up and operating of a variety of automatic or semi automatic machines
•
used in the production of our clients products including activities such as aligning, masking, etch
and diffusion.
Load and unload wafers into furnace by using vacuum tweezers.
•
OFS/FITEL (LUCENT TECHNOLOGIES INC.)
SOMERSET, NEW JERSEY
Production Supervisor Nov. 2001 to May 2002
Supervised small group dedicated to assembly of high power optical devices. These devices
•
included patented optical combiners, cladding pumped fiber lasers and cascaded Raman
resonators.
Maintain efficient workflow by holding direct reports accountable for quality and efficiency of
•
their work. Meet quality and deadline standards by the effective use of job scheduling practices.
Achieved shift profitability in the area of cost of goods by effectively supervising the shift in the
•
use of company materials and supplies.
Train and motivate staff to maximize productivity and to control costs with hands on
•
management and close monitoring of division budget.
Proficient in effectively organizing, handling, and monitoring a wide variety of tasks.
•
Provided metrics for measuring the production progress (capacity v.s actual
•
LUCENT TECHNOLOGIES INC.
SOMERSET, NEW JERSEY
Mechanical Design/Senior Technical Associates May 1998 to Nov. 2001
Fabricated and designed hardware lay out including block diagram of the system.
•
Mechanical designed of chassis and enclosure using Visio and AutoCad software.
•
Built and modified test fixtures, chassis and enclosures for best matching.
•
Assisted in new product design development and design upgrades to existing products.
•
Assembled and test prototype equipment.
•
Performed development testing and data analysis, test fixture (mechanical and electrical),
•
troubleshooting, and continuous improvement.
Ensure that all tests procedures are completed accurately, on time, and are clearly documented.
•
Develop and fixture electrical mechanical test set ups.
•
Worked effectively in both self managed and team based projects; maintain high ethical and
•
quality standards, professional demeanor, and cooperative attitude.
Used hands on, detail oriented approach in completing projects and assignments.
•
Mechanical assembly of components, front panel and chassis; including assembly of wire
•
harness, connectors such as type N, TNC, and BNC.
Electro mechanical assembly of fiber optics component.
•
Soldered PC Board; Thru Hole and Surface Mount solder; Connectors and Wires, and Strip line
•
circuit.
Test and tuned 1310 and 1550 transmit lasers to meet the specification. Evaluate test results for
•
their compliance to specifications.
Worked with customer on site survey of test site. Installed and tested the finished products at
•
customer's test site; with great emphasis of customer support of the product.
Perform fiber cable assembly including connector assembly by using mechanical tools such
•
stripping, cleaving, splicing and crimping. Cleaved 1310nm and 1550nm fiber together and
spliced fibers by using Ecrisson and Fujitsu Splicers.
Install, maintain, repair, and modify various types of equipment ranging from 10base T hubs and
•
concentrators to 100base T Ethernet switches.
Test and record data (return loss, insertion loss) into the system and saved in a file. The test
•
included 24 hour temperature cycle with the use of optical spectrum analyzers and the use of
optical power meters, and high power lasers.
Assembled of Raman and laser fiber cavity attachments used in high power Yb double cladding
•
fiber pumped lasers.
Assisted engineer in assembling and testing the prototypes, such as RF TAG,IF, and Digital
•
components.
Involved with projects such as Wireless Microlan, ELB, and WTOC.
•
Installed and tested the finished products at customer's test site.
•
Assisted engineer in demonstrating the finish system to customers.
•
Worked with other technicians to achieve team goals.
•
Traveled to customer sites to assist and to troubleshoot equipment.
•
Assisted others, and request assistance from others as needed. Many projects are high priority
•
and have short lead times.
Familiarized with tools such as torque wrenches, power drills, strippers, and crimpers.
•
ELECTROMAGNETIC TECHNOLOGIES, INC.
SPRINGFIELD, NEW JERSEY
Engineering Technician/Supervisor Oct. 1996 to Apr. 1998
Supervised small production group in assembly and test department.
•
Maximizes the utilization of manpower through effective cross training, development &
•
delegation.
Plans and coordinates production activities and team objectives providing necessary direction
•
for production team members. Assure that schedules are met.
Assisted engineer in assembling and testing complex multi layer stripline circuits for high
•
performance beamformer network (BFN) system operating at x band and c band.
Test and tuned the BFN system to meet stringent specification for satellite communication.
•
Troubleshoot and repaired strip line components such as coupler, power divider, and phase
shifter operating at .77 18 GHz.
Perform work under a microscope and perform soldering.
•
Worked with production group on assembling, testing, and tuning BFN system in order to meet
•
tight delivery schedule. Collect data and save onto excel spreadsheet.
Assembled and test sophisticated filters of passive microwave components for electronic
•
counter measures systems, terrain following radar, and fire control equipment such as low pass,
high pass filters and multiplexers.
Troubleshoot and repaired transmitter, receiver, and phase lock loop circuits.
•
Assembled and tested RF components such as power dividers, couplers, tuners (sliders),
•
terminators, waveguide filters and adapters, and adjustable and fixed attenuators. These
devices are in between .25 GHz to 18 GHz.
Mechanical assembly of circuit boards such as thru hole and surface mount solder.
•
Mechanical inspected incoming and outcoming parts by using blue prints. And mechanical
•
inspected parts by using caliper, vernier, and diode.
Manually calibrated & inspected tools such as blocks, vernier, diode, and micro caliper.
•
Familiarized with tools such as torque wrenches, power drills, strippers, and crimpers.
Familiarized with blueprints and schematics.
•
Security Clearance.
•
EDUCATION
DeVry University
WOODBRIDGE, NJ
Electronics Engineering of Technologies
AAS Degree
March 1990 March1992
Contact this candidate