Mark Dougherty **** EP True Pkwy, Unit ***, W. Des Moines, IA 50266
503-***-**** email: abipfd@r.postjobfree.com
____________________________________________________________________________
_______
Summary
Senior hardware engineer with extensive experience as a project leader, RF,
analog, and digital circuit board designer. Strong background with circuit
board level design and EMC product compliance.
Qualifications
RF design Analog design Digital design EMC & product
safety compliance
Achievements
. Led project team that designed the Bypass receiver on the $500M Leasat
satellite program.
Designed all of the VHF frequency multipliers for 4 different receivers.
. Defined the system architecture & designed 6 circuit boards for the PS21
probe station which
had an X-Y stage resolution of 0.25 microns.
. Reduced trackball assembly time from 30 minutes to 30 seconds by using a
microprocessor to
perform an automatic calibration routine.
. Developed a 20 kV high voltage power supply with a stability of 0.01%
that earned an exceptional
contribution award.
. 90% first turn success rate with designing circuit boards that meet EMC
compliance and UL, ETL,
CE product safety requirements.
Professional Experience
PECO, Inc., Portland, OR 2005-
2007
Sr. Electronics Engineer, Analytical Instrumentation Group
Defined the system architecture for the PL511 pulp consistency analyzer,
which used an ultra-wideband
RF transceiver to measure the moisture content of paper pulp. Designed a
direct digital synthesis clock generator board using the AD9852 DDS chip
which was enabled by a PIC18LF4525 micro-controller.
Tektronix Inc., Beaverton, OR
2005
Electrical Engineer, Wireless Field Test Group
Performed EMC and environmental testing on a GPS receiver for the NetTek
spectrum analyzer.
Electro Scientific Industries, Portland, OR
2004
Electrical Engineer
Obtained CE compliance on a capacitor termination system and designed a new
MLCC chip capacitor
test system.
Phoseon Technology, Inc., Beaverton, OR 2003
Senior Electrical Engineer/Consultant
Developed a 39A, 12V programmable power supply with a serial interface and
a temperature controlled relay module for a high density, chip on board,
ultraviolet LED array.
FEI Company, Hillsboro, OR 1999-
2002
Senior Electrical Design Engineer, Micro-Electronics Product Division
Developed a 20kV lens2 power supply used on the AT600eX project which had a
stability of 0.01 %. Designed a light field/dark field LED illumination
control board for a coaxial optical microscope.
Cascade Microtech Inc., Beaverton, OR 1995-
1998
Senior Product Engineer, Probing Systems Business Unit
Defined the system architecture & designed 6 circuit boards for the PS21
probe station. Awarded US patent for the PS21 micro-chamber design which
enabled femto-amp leakage current measurements. Designed a 3-axis stepper
motor control card based on the Motorola MC68332 processor. Responsible
for product safety, including CE mark, ETL, & EMC compliance for the entire
line of probe stations.
Mark Dougherty 6200 EP True Pkwy, Unit 112, W. Des Moines, IA 50266
Page 2
503-***-**** email: abipfd@r.postjobfree.com
Tektronix Inc., Beaverton, OR
1981-1995
Electronic Engineer III, CAChe Scientific
1987-1995
Designed a 3D trackball with an Apple Desktop Bus for the CAChe worksystem.
Reduced trackball assembly time from 30 minutes to 30 seconds by using a
microprocessor to perform an automatic calibration routine. Supported all
manufacturing operations for circuit board assembly and testing.
Electronic Engineer III, Imaging Research Lab
1983-1987
Designed the horizontal and vertical deflection amplifiers for a LCD light
valve projection display with a resolution of 1280 X 1024 pixels. Designed
a line buffer/frame buffer memory card for a Mead Cycolor printer with a
resolution of 300 dots per inch. Demonstrated a unique raster scan printer
technology as
an alternative to ink-jet or laser-jet products.
Hardware/Software Engineer II, Integrated Circuit Operations
1981-1983
Developed ATE software for several key components in the 2465 and 2430
oscilloscopes. Designed hardware probe cards for testing the 2465
horizontal and vertical deflection amplifiers using the S3260 and S3030
semiconductor test systems.
Hughes Aircraft Company, Fullerton, CA 1978-
1981
Member of the Technical Staff, RF/Analog Group
Held project leader responsibility for final system test of the "Bypass"
Leasat satellite receiver and designed the command/control test fixtures.
Designed all of the VHF frequency multipliers and a 24 bit TTL
command/control board used on the satellite's four receivers.
Education
. BSEE, Electrical Engineering, Iowa State University, Ames, IA, 1978
Won national 3rd place award for engineering design presentation at Iowa
State University entitled
"Refrigeration For Under-Developed Countries."
. AAS, Electronic Technology, S.E. Iowa Community College, Burlington, IA,
1974
Computer Aided Design Tools
Cadence/OrCAD Schematic Capture, LTspice, MathCAD, ABEL
Awards & Patents
. Earned an exceptional contribution award at FEI Company for the
development of a lens2 high voltage power supply used on the AT600eX
project.
. Earned a key achievement award at CAChe Scientific for the development of
a computer aided chemistry workstation that won the 1990 and 1994 R&D 100
product of the year awards.
. Probe Station Having Inner & Outer Shielding, Patent # 6288557, Issued 9-
11-2001.