Machine Operator Crane
Resume:
B I O DATA
Jeremias G. Labasano
E-mail Adddress : ****************@*****.***
: ****************@*****.***
Contact No : 009***********/009***********
OBJECTIVES : To join a reputable company that I can apply and develop my skills and
potential in line with, company’s goals.
Position Desired: OVERHEAD CRANE OPERATOR
SUMARY OF WORKS/CAREER SUMMARY
20 years over all working experience which includes crane operation on, Quay crane, Gantry crane &
Overhead crane.
Trained and authorized to operate crane, Quay crane Gantry/Yard crane, and overhead crane in
deferent areas arround Tsuneishi Heavy Industries (CEBU) Inc.
Perform hazard assessment related to crane operation and all function around operator’s
responsibilities in accordance with the Company safety roles and principles.
Determine a formal lift plan is necessary and able to utilize proper rigging materials and principles.
Recognize the load's centre of gravity and the importance of load balance and its standard safe
working load (SWL).
Knowledge and experience about sheet metal working activities like Flame cutting, Plate bending and
materials expediting, Tool keeper, Time keeper and warehouseman.
Exposed and authorized to operate sheet metal machineries such as, Eye tracer cutting machine, Radial
machine, bending machine, oxyacetylene cutting machine.Authorized and operate gas cutting
machine, eye tracer, and oxy acetylene and radial machine.
Knowledge and experience to operate Plastic Injection molding machine, in plastic Industrial company.
Knowledge and experience in construction works.
WORK EXPERIENCES
Employer Al-Suwaidi Industrial Services
Country Kingdom of Saudi Arabia
Position Held CRANE OPERATOR (OVERHEAD CRANES)
26 JUNE 2003 TO PRESENT
Period (From–To)
Project Name SAUDI IRON & STEEL COMPANY (HADEED) MPS
ROLLING MILLS DIVISION
•
HOT MILL COMPLEX DEPARTMENT(FRP/HSM)
Mill Crane (overhead crane, 60T- 110T Cap.) Jan. 2012 to present.
Assists in Roughing Mill and Finishing Mill work rolls and back-up rolls changes.
Receives Roughing Mill / Finishing Mill work rolls and back up rolls and shift dead rolls to roll shop.
Assist Mechanical Maintenance in lifting works during breakdowns, down days and shutdowns.
Assists in cobble removal from the mill, delay and run-out tables.
Loads cut down to size and transfer bar to flatbed trucks.
Operates roll lifting tackles, C-hook, magnet, coil tong and other lifting slings.
Replaces crop shear pit crop bucket.
Lifts coil box cobble from the coil box.
Lifts telescopic coils from Down Coiler where handling is not possible with the coil tong.
Empty the scale bucket from the furnace.
Sounds the siren every time the crane travels with load to caution crews working on the mill floor.
Lifts and places the descaling test plate on the delay table during descaler pattern test.
Inspect the crane in accordance with the Crane Section’s Crane Pre-operation Checklist.
Perform any additional task given by HSM Shift Leader or Foreman.
Yard Cranes (overhead crane, 10T- 35T Cap.) June 2003 – Jan. 2012
Lifts coil from down coiler walking beam coil saddles.
Transfer coils from the walking beam saddles to coil yard saddles as per L III transport task created by DC
foreman.
Lists down coil ID and location manually whenever L III system is down and submits to DC foreman for
updating.
Places coil on inspection line and sampling station.
Loads coils on flat bed trucks as per Logistics and Dispatch requirement.
Disposes scrap car and bucket. Loads sample bucket to pick-ups whenever required.
Assists in lifting activities by maintenance in DC and mill areas such as changing of pinch rolls, side
guides and etc.
Assists in the removal of cobbles.
Ensures proper turn-over and take-over of crane and inspects the crane in accordance with the crane
section’s Pre-operation Checklist.
Perform any additional task assigned by HSM Shift Leader or DC Foreman
Employer J-Cledd Philippines
Country Philippines
Crane Operator (Quay Overhead Crane and Machine operator)
Position Held:
November 1998 to June 2003
Period (From–To):
Project Name Tsuneishi Heavy Industries (CEBU) MPS.
• PORT DEPARTMENT
Quay Crane Operator (Jan. 2000 to June 2003)
Ensure the condition of crane equipment, and its all function around operator’s responsibilities.
Recognize the load's centre of gravity and the importance of load balance.
Able to utilize proper rigging materials and principles.
Determine a formal lift plan is necessary. Perform a hazard assessment related to crane operation.
Operate crane for unloading of the imported material from ship storage down to shore filling area.
Filling of materials into storage area, according to its specification.
Loading and unloading of transportation trailer truck, carrier going to different areas around the company
premises.
Ensures proper turn-over and take-over and reports the condition of the crane for some obvious defects.
Perform any additional task assigned by group in charge or Shift Leader.
• FABRICATION DEPARTMENT
Overhead crane operator (November 1998 – Jan 2000)
Loading/Unloading of materials use for fabrications such as steel plates, angle bars, I-beams, and any other
materials needed for building up of ship blocks.
Loading of finished ship blocks into flatbed transport carrier vehicles (CAMAG).
Machine operator (Eye Tracer, Radial Cutting & Oxyacetylene)
Operate eye tracer cutting machine and cut out sheet of metal plates into a piece of works, such as collar
plate’s brackets, use for fabrication, erection assembly, and ship repair.
Operate radials for cutting and beveling works activities.
Operate bending machine for any bending works assign.
Fabricating any piece of work from sheet of metal plate as instructed by direct superior.
Do and cooperate with my superior in any work or any urgent job activities.
Employer Nihon Fuji Industries Corp.
Country Philippines
Position Held: Warehouseman, Machine Operators
December 1994 – October 1998
Period (From–To)
Project Name Regular worker
• Production Department
Machine Operator (Plastic Injection Molding)
Operate Injection Molding Machine for its production and checking up of the facility of products.
Inform immediately to my superior in any trouble covered during the operation.
Doing some machine related job as instructed by my superior.
Assist maintenance work.
Crane Operator (Pendant Overhead crane)
Operate overhead pendant crane for mounting and dismount any products mold required for production
working output products of injection molding machine.
Doing some factory lifting job as per instruction of my superior and shift leader.
• Warehouse Department
Warehouse Assistant
Receiving and monitoring of incoming and outgoing materials.
Making the daily monitoring update and reports.
In-charge of the recording and releasing of incoming and outgoing stocks.
Responsible for the daily, weekly, and monthly inventory of stocks.
Electric Fork Lift Driving
Filing of finished products into the stock filing location.
Lifting of finished product and loading into the van for shipment.
Lifting of the raw materials from delivery van and filing it into the storage area.
Lifting of the raw materials from storage area, and take to production line.
Doing some factory lifting job as per instruction of my superior.
Employer 4J Construction
Country Philippines
Position Held: Utility personnel
Period (From – To) October 1990 – May 1994
Project Name Construction company
Assist all areas and monitor each personnel’s attendance and the availability of materials being used.
Receiving and monitoring of incoming and outgoing materials.
Making the daily monitoring update and reports.
In-charge of the recording and releasing of incoming and outgoing stocks.
Responsible for the daily, weekly, and monthly inventory of stocks.
Educational Qualifications:
Level School School Year
Elementary Duangan Elementary School 1976-1982
High school Buanoy National High school 1982 -1986
College: University of the Visayas 1986 – 1988
Training and Seminars Attended:
Rolling Mills Division/Hot Mill
Contractor Awareness Session Complex March 03 2010
Saudi Iron & Steel Co.
(HADEED) K.S.A.
EOT Crane Operator’s Technical Technical Section Department
Familiarization Program (TSD) December 08, 2006
Saudi Iron & Steel Co.
(HADEED) K.S.A.
Safety and Environmental
Fire Brigade Training Management 19th – 21st March 2003
Department Tsuneishi Heavy
Industries
(Cebu) Incorporated, Cebu,
Philippines
Safety and Environmental
Safe Sky master Operation Management 15th – 16th January 2003
Seminar Department Tsuneishi Heavy
Industries
(Cebu) Incorporated, Cebu,
Philippines
Safety and Environmental
Safe Crane Operation & Management 12th – 14th March 2002
Rigging Seminar Department Tsuneishi Heavy
Industries
(Cebu) Incorporated, Cebu,
Philippines
Interests:
• Adapt training and work with others to learn more, in addition of my knowledge and working skills.
Listen & obey instruction from direct superiors & leaders.
Personal Information:
Gender Male
Height 5’ 2”
Weight 170 lbs
Civil Status Married
Nationality Filipino
Date of Birth Sept 30 1968
Place of Birth Balamban Cebu
Passport No EB6354208
Date Issue/Expires 17 September 2012 / 16 September 2017
Name of Spouse Jovencia B. Labasano
Contact Number +63-929*******
Address Riverside Arpili, Balamban Cebu
Dependents Jason Jerry B. Labasano
Jezzle Jovy B. Labasano
Computer Skills Average
Special Skills Machine Operator (Overhead Crane and Injection molding machine)
Other Skills Time keeper, Warehouseman, Expediter and Etc.
References:
• Mr. Jaime C. Padica, Safety Officer, MS Al-Suwaidi Industrial Services Co., Ltd.
Jubail Industrial City, Kingdom of Saudi Arabia Tel. # (096*-*********.
• Mr. Oscar Santos, Production Supervisor FRP/HSM coil yard
Saudi Iron and Steel Company (HADEED)
Jubail Industrial City, Kingdom of Saudi Arabia
• Mr. Primo Paulin, Brgy. Captain
Arpili Balamban Cebu Tel # 092********
Contact this candidate