Engineer Design

RESUME

RICHARDSON LAL

M.S. Structural Engineering

B.Tech, Civil Engineering

Experience ~ 6.7years (5.5years Design Engineering + 1.25years in Field

Engineering)

Permanent Address Presently available at

House No. 69, Ground Floor, DDA SFS Flats Flat 2812, Sama Tower,

Sector 1, Pocket 1, Dwarka, New Delhi. Electra Street, Near NMC

Hospital,

India - 110075, +91-987******* Abu Dhabi, UAE ( +971*********

E-mail -*************@**********.***

Objective

I am seeking a challenging career in Civil/structural design, construction,

proposal, project engineering and project management for EPC and Revamp

Projects.

Current Position

I am working with Technip-France, Abu Dhabi as Civil/Structural Engineer

for Oil and Gas projects from 2.25 years and more.

Also, I have worked on an assignment for 15 months (from Feb 2009 to April

2010) as Field Engineer, Steel Structures for project Khursaniyah Gas

Plant, Saudi Arabia (ARAMCO). The project was designed and constructed by

Technip-Italy, Rome.

Previous Employers

. Fluor Corporation, India from April 2006 to Nov 2008 (2.7years) in the

field Oil & Gas, Energy & Chemicals and Petrochemical & Refinery

Projects.

Designation- Associate Design Engineer

. L&T ECC, Chennai June 2004 to April 2006 (2years) in Structural analysis

& design of Buildings.

Designation- Sr. Design Engineer.

. Approximately 2years Research work (Determine compressive strength of

Masonry wall through Finite Element Analysis and verify experimentally)

at Indian Institute of Science, Bangalore, India.

. Summer training during B. Tech courses in 2000 for the duration of 45

days with National Building Corporation Company, N. Delhi, India.

Area of Interest

. Structural Analysis and Design

. Failure pattern and Theories

. Finite Element Methods

. Structural Steel

. Reinforced Concrete

. Pre-cast Concrete

. Pre-stressed Concrete

. Structural Masonry

. Offshore Engineering

Educational Qualifications:

. M. Sc. (Master of Science) in Structural Engineering (2002- 2004)

Institute- Indian Institute of Science, Bangalore, CGPA secured - 5.9/

8.0

. B. Tech (Bachelor of Technology) in Civil Engineering (1998- 2002)

Institute- Jamia Millia Islamia, New Delhi, Percentage marks secured -

76.3%

Skills: STAAD-Pro, RISA, ANSYS 6.1/7.0/8.0, NISA, ETABS-8.4.8, SAP2000,

NISA, PCA Col,

SPR (Smart Plant Review), FOUNDATION3D, MAT3D, Worked with

Micro station

Exposure to International Codes: UBC97, ASCE7, ACI-318, ACI-350, AISC, ASD,

LRFD, Russian Codes, GOST, SNIP

Support Packages: Microsoft Excel, MS Office, Math-cad, Power Point, Lotus

Notes, and Windows etc.

Others

Proactive, Commitment, Ownership, Communication Skills, Hard work,

Flexible, Teamwork

Professional Experience: (6 years 7 months)

1) Technip-France, Abu Dhabi, UAE (Nov 2008 to Till Date)

I am working with Technip-France, Abu Dhabi from Nov 2008 (over 2.25 years)

for Oil & Gas, Energy & Chemicals and Petrochemical & Refinery Projects.

Designation- Civil/Structural Engineer

Roles and Responsibilities

. Perform analysis and design for Steel and RC structures, Pipe rack, Pipe

Bridge, misc. buildings (i.e. substations, workshop, office etc.),

Equipment foundation, culvert, roads, manhole and underground utilities and

foundations (Isolated, Combined, Raft, Pile and Pile-Caps). Prepare

calculation report.

. Execute structural engineering activities (concept, front end engineering

development, technical study and detailed design).

. Proposal works including finalization of BOQ, Review of FEED drawings,

Documents, Additional Design requirements, Review of Tender Bulletins

documents, Tender Clarifications, Qualifications, Assumptions and

Exclusions, Demolition and modification plans, Requisition of sub-contract

item, FEED endorsement works,

. Development of ratios for Structural and Concrete items for civil works

MTO.

. Analysis of FEED drawings to identify the Risks, Interface and Tie-In

schedule documents

. Quantity estimation, preparation of BOQ for Proposal and bidding

..Conduct survey and prepare site survey report. Prepare scope of Work and

Tender Documents including material estimates.

. Exposure in preparation of civil/structural design basis & construction

scope of work.

. Site Support, Answer RFI and technical queries. Expediting Structural

steel fabrication and delivery

..Overall responsible for all onshore civil/ structural technical issues,

inter-discipline coordination & interface.

Major Projects handled with Technip-France, Abu Dhabi

1. Proposal for SOCC, Alkyls Aluminum Plant, Saudi Arabia (Nov 2010 till

now)

Activities and Responsibilities - Involved in the review of FEED

Documents and Preparation of MTO. Review and analyze FEED drawings,

Documents, Additional Design requirements, Review of Tender Bulletins

documents, Tender Clarifications, Qualifications, Assumptions and

Exclusions, Preliminary design calculations for various kinds of

Structure (Pipe-Rack, Pipe Bridges, Equipment supporting structure,

Platforms, Shelters, Platforms on equipments, Stair Tower etc.) and

their foundation. Preparation of BOQ and Sub-contract documents. Review

of company standard design general specification.

2. Proposal for WASIT GAS PLANT, Saudi Arabia (Aug 2010 to Oct 2010)

Activities and Responsibilities - Involved in the review of FEED

Documents and MTO. Review of Tender Bulletin documents and Technical

Quarries. Preliminary design calculations for various kinds of Structure

(Pipe-Rack, Pipe Bridges, Equipment supporting structure, Platforms,

Shelters, Platforms on equipments, Stair Tower, Vent-Stack Structure

etc.) and their foundation. Prepare BOQ and Sub-contract documents.

Review of company standard design general specification.

3. ASAB 3, Ongoing project, (May 2010 to July 2010)

Activities- Design of Blast resistant Substation buildings, Design of

20mX100mx18m Pipe rack/Pipe Bridge

4. KHURSANIYAH GAS PLANT (Field Steel Structural Engineer, Feb 2009 - April

2010)

(Deputed to Saudi Arabia to assist Technip-Italy (Leading a team of 3

Engineers & 1 Designer)

Activities- To support construction team for modifications through RFI,

FRN and site modification packages. Design platforms and Pipe supporting

structures. Inter discipline co-ordination. Structural material purchase

and expedite, Co-ordinate with Vendor for (approval of fabrication

drawing, Fabrication and material delivery), Answer client (Saudi Aramco)

for their observations and Survey, Co-ordinate Punch-List items with

Client, Co-ordinate with internal construction team. Coordinate and

Approve "As-Built Drawings".

5. Proposal for IGD HABSHAN

(Activities- Preliminary design and calculation for materials)

A) Steel Structures

. Equipment Supporting Structures, Pipe Bridge, Pipe-Rack, Flare Stack,

Platform, Shelter etc.

. Base plate, Anchor bolt, Stairs and Ladders, Handrail, Gratings,

Package structures, Crossovers

B) Concrete

. Underground Sump, Package Structures,

. Foundations for Pipe Racks, Equipment supporting structures, Pipe

Bridges, Platforms, Flare Stacks, Platform, Shelters

. Foundations for Boilers structures, Machine Foundations, Static

Equipment Foundations, Horizontal vessels, Vertical Vessels,

. Pump Foundations, etc

2) Fluor Corporation, India (April 2006 to Nov 2008)

I have worked with Fluor Corporation, India from April 2006 to Nov 2008

(2.7years) in the field Oil & Gas, Energy & Chemicals and Petrochemical &

Refinery Projects.

Designation- Associate Design Engineer

Roles and Responsibilities

. Perform analysis and design for Steel and RC structures, Pipe rack, Pipe

Bridge, misc. buildings (i.e. substations, workshop, office etc.),

Equipment foundation, culvert, roads, manhole and underground utilities and

foundations (Isolated, Combined, Raft, Pile and Pile-Caps). Prepare

calculation report.

. Load Calculation (DL, LL, Piping, Thermal, Anchor, Guide, Temperature,

Wind and Seismic load) and

Load Combinations as per Design Philosophy. Framing Structure, Optimizing

Member Size, study on feasibility of erection, installation.

Study concept of Modularization, Co-ordination with other departments

(Piping, Electrical, Mechanical, Instrument. Answer RFI.

. Review and Checking of Engineering design documents

. Co-ordination with internal design Team for the preparation of Drawings

and Delivery.

. Impart training to subordinates and review their design documents,

. Educate trainee engineers about company standards and guidelines through

presentations.

. Attending weekly project update teleconference and technical

teleconference with prime office.

Major Projects handled with Fluor Corporation

6. TANECO REFINARY (Russian standard, SNIP, GOST)

(Activity- Engineering Checker for design calculations and developing the

Engineering team)

A) Steel Structures

. Analysis and design of 1600M long, 35m High, 14m Width Pipe-rack

. Road crossing and Bridges, Steel Connection design

B) Concrete

. Design of Piles and Pile Caps (20,000 in numbers)

. Design of Pedestals, Anchor Bolt

7. SIPCHEM (Saudi International Petro-Chemical) (LRFD, ACI, ASCE, BS

guidelines)

(Activity- Design Engineering and Engineering Checker for design

calculations)

A) Steel Structures

. Analysis and Design of Interface Pipe Bridges (15M Long, 6.0M Width,

4.0M Height)

. Analysis and Design of Blow down Drum Platform (20M Long, 6M Width, 12M

Height)

. Analysis and Design of 64M Tall Vent Stack Structure (Plan Dimension

8MX 8M, Ht. 64M)

. Connection Design (Moment connection, End Plate, Shear tab, Splice,

Bracing, Base Plate Welded Connection etc) and its detailing.

. Design of MPS and MES

. Study on the feasibility of modularization and lifting analysis of

Structure modules.

B) Concrete Structures

. Analysis and Design of Precast Pipe-Rack

. Design of Precast Concrete Frame (Beam, Column, Stringer and its

connection) along with its lifting analysis for Pipe Rack

. Design of Underground Circular Sump

. Design of RC foundation, Pedestal for Pipe racks and Pipe Supporting

Structures

. Design of Foundation for 64M Height Vent Stack Structure

. Design of RC foundation for Blow down Drum (Horizontal Vessels)

8. RASGAS (Ras Laffan LNG Company Limited) (ASD, ACI, ASCE, BS standards)

(Activity- Design Engineering and Engineering Checker for design

calculations)

A) Steel Structures

. Analysis and Design of Pipe Crossings (35M Long, 6.0M Width, 3.0M

Height)

. Steel Connection design

. Study on the feasibility of modularization and lifting analysis of

Structure modules

B) Concrete

. Design of Shallow Isolated and combined foundation.

. Design of Precast Box Culvert along with lifting analysis of Culvert

3) Larsen & Toubro, ECC, Chennai, India July 20004 to April 2006

I have worked with L&T ECC, Chennai June 2004 to April 2006 (2years) in

Structural analysis & design of Industrial and commercial Buildings.

Designation- Sr. Design Engineer.

Major Projects handled with Larsen and Toubro

9. Cyber Pearl, Hyderabad

. Analysis and Design on R.C. Beams and slabs, Retaining Walls,

Staircase, Water -tank (IS guidelines)

10. L & T InfoTech Building at Chennai

. Analysis and Design on R.C. Columns, Footings, Beams and slabs,

Retaining Walls, Staircase, Water -tank (IS guidelines)

. Analysis and Design of steel framed entrance canopy (IS guidelines)

11. L & T InfoTech Tower at Powai (East)

. Analysis and Design of RC Flat Slab (IS guidelines)

. Design of Post Tensioned Flat Slab. (IS guidelines)

. Analysis and design of underground sump with moving vehicle loads (IS

guidelines)

. Design of Overhead Water Tank (IS guidelines)

12. L & T InfoTech Tower at Powai (West)

. Design of Footings and R.C. Columns (IS guidelines)

. Analysis and Design of RC Flat Slab (IS guidelines)

. Design of Post Tensioned Flat Slab (IS guidelines)

Details of Work during summer training

I was involved in Supervision of D.M.R.C. (Construction of Railway Platform

on columns and arches)

project in New Delhi at Gautam-Nagar. Engaged in site supervision of

construction activities, material

testing, data preparation and estimation and also quality control works.

4) M.Sc. Indian Institute of Science, Bangalore, India

Thesis

Area of work: Characteristics of soil-cement block and soil-cement block

masonry

In the study, role of surface friction on the compressive strength of

Masonry is examined. In the process, NISA (EMRC), and ANSYS 5.4/6.1 carried

out the Analysis of Masonry Prism. A 3D masonry prism (550 X 240 X 100mm)

is modeled using ANSYS. The prism consists of two different materials. Both

the materials have been modeled with their elastic and deformation

characteristics. Their interface is modeled with Contact Element Concept.

Materials non-linearity are been taken into account by using actual Stress-

Strain curve for the two materials, i.e. Block and Mortar. Concepts of

Contact Elements were used to model the interface of Mortar and Block.

Failure pattern has been studied by the analysis of ANSYS. Same is verified

experimentally. Extensive program of experiment has been set up and useful

data has been taken.

Academic Achievements:

. Topper of the Class till Matriculation

. Graduated in the First Class with Distinction

. Published three International Papers in ASCE from M.Sc. thesis

Publications:

1. Journal of Materials in Civil Engineering, ASCE, Vol 19, No. 2, Feb 1

2007, @ ASCE ISSN 0899-1561/2007/2 139-148/$25.0 "Optimum soil grading

for the soil-cement blocks", B.V. Venkatarama Reddy, Richardson Lal and

K.S. Nanjunda Rao,

2. Journal of Materials in Civil Engineering, ASCE, Vol 19, No. 2, Feb 1

2007, @ ASCE ISSN 0899-1561/2007/2 164-172/$25.0 "Enhancing bond strength

and characteristics of soil-cement block masonry", B.V. Venkatarama

Reddy, Richardson Lal and K.S. Nanjunda Rao

3. Journal of Materials in Civil Engineering, ASCE, "Influence of bed joint

thickness and mortar-block elastic properties on the strength and

stresses developed in soil-cement block masonry",B.V. Venkatarama Reddy,

Richardson Lal and K.S. Nanjunda Rao, (Accepted and under printing).

4.

5.

Date of Birth March 1, 1980

Passport No and E1495856, 23-04-2012

Valid till

Sex Male

Marital Status Married

Religion Hindu

Nationality Indian

Languages Known English, French, Hindi

Hobbies and Sports Badminton, Chess, Cricket

Personal Profile:

References:

1) Paolo F Cicala 3) Mark Woolaghan

Designation-Deputy Project Designation- FE Manager, Bechtel, UK

Director, Email- ********@*******.***

Technip-Italy

*****-*******@*******.***

2) Salvatore Longo 4) Dinesh Singh

Designation- Project Engineer, Designation- Lead Engineer, Fluor

Technip-Italy Corp, India,

*****-******@*******.***, Email- ******.*****@*****.***,

Phone- +39-06-659*-**** Phone- +91-931*******

Contact this candidate