RUFINO R. AGATI JR. III

#****E Gen. Luna St., Bangkal, Makati City, Philippines

abgsi2@r.postjobfree.com / abgsi2@r.postjobfree.com

+966********* / +63-927-***-****

OBJECTIVE To utilize my acquired knowledge, skills and training in the field of Telecommunications and Broadcasting and at the same time contribute to the productivity of the company.

CERTIFICATIONS ACHIEVED

Soon to be a Certified Ericsson 4G LTE Installer and Commissioner

Certified Fiber Optics Technician (CFOT 7280081) recognized by an International Organization Fiber Optic Association (FOA) Incorporated.

Hands on experience in mechanical/fusion splicing techniques

Termination and polishing of fiber optic connectors such as LC, SC, ST, FC

Hands on experience in using fiber test equipments such as VFL(Visual Fault Locator),Test Source, Optical Power Meter, Fiber Tracer, Inspection Microscope, and OTDR (Optical Time Domain Reflectometer)

WORK EXPERIENCE

TELECOM ENGINEER

SNS-BATCO(Saudi Network Services-Bayader Al-aryaf Telecommunication Corporation)

Riyadh, KSA

Present

Scope of work:

( ERICSSON Direct Project- IPRAN VLAN E2E and RBS Tester)

Transmission End to End ping test and troubleshooting of 3G and 4G LTE IP RAN’s VLAN at Exchange(Aggregator & CWO), Hub(TN & CWO) and last mile sites(TN).

Ethernet configuration competence on Ericsson’s Traffic Nodes (20P and6P).

( ERICSSON-STC 2G, 3G, 4G LTE Modernization Project )

Installation, commissioning and integration of Ericsson’s 2G,3G RBS 6000 series, and 4G LTE

Conducts Physical Acceptance Inspection(PAT) for 2G, 3G, 4G LTE and do sweep test using Site Master measurement of DTF,VSWR and Return Loss.

Conducts Ericsson’s TN transmission hardware and software upgrade/swap

Commissioning and integration of 3rd and 4th carriers RUW’s in Node B’s

Monitor the RBS fault and troubleshoot the problem if any.

Quality audit of installation of equipments as per layout plan and Ericsson standard.

LOS and Site Survey the feasibility of new site/equipment on the existing site in complex conditions.

TSSR generation for Ericsson 2G. 3G and 4G modernization project.

Experience in using Moshell, OMT, RBS Element Manager, MiniLink Craft, Putty.

.

NETWORK IMPLEMENTATION ENGINEER

SMART COMMUNICATIONS INC.

Ayala Avenue, Makati City, Philippines

July 25,2011 – November 25,2011

Scope of work:

(SMART 2G, 3G, Wimax Roll-out, and Modernization Project)

Perform tasks with other staff within the project to ensure work is completed and complies with the specifications of the contract.

Provides technical assistance for the Project roll-out in the area of Radio and Transmission.

Implementation and enforcement of the adopted quality procedures and processes for Telecom installation.

Perform RBS/BTS and Transmission installation preparation, check and verify all requirements.

Coordinate works with the Contractors and other disciplines that have an interface with the Radio and Transmission part of the project.

Monitor activities of the Contractors and assure that contract requirements and specifications for the Radio and Transmission part of the project are met.

Assures that the agreed implementation guidelines and schedules are followed and enforced.

Assists quality assurance group in auditing as required.

Conducts Physical Acceptance Inspection for Acess and Transmission, provide technical assistance to Contractors and other discipline with dependencies on Radio/Transmission activities.

Co-ordinate Site activities and assures that all disciplines directly involved in the project are in phase the project goals and objectives.

Assumes that the agreed schedules are followed.

TND / RND SURVEY ENGINEER

LIVING @ SENSE, INC. (Telecom ASP)

#8003 Sta. Maria Drive, 4th St. Sta. Maria Industrial Estate, Bagumbayan Taguig City, Philippines

May 09, 2011 – July 15,2011

Scope of work:

Transmission Network Design Engineer (TND)

( Phase -1 Ericsson-Beltel Project, Visayas and Mindanao Area )

Conduct joint site survey with the RF engineers, Civil works engineer site acquisition

group for a new proposed BTS sites to complete the GSM network

LOS survey for Access and Back Bone PTP microwave links.

Checking for obstacle details that may obstruct the transmission path of MW link as planned.

Path Profile generation and verification for the PTP Microwave links using Pathloss 4.0.

Proposing the optimum height of antenna keeping in view the height of obstacles and clearance criteria

Generation and submission of LOS Technical Site Survey Report.

Radio Network Design Engineer (RND)

( Phase -1 Ericsson-Beltel Project, Visayas and Mindanao Area )

Conduct joint site survey with the Transmission engineers, Civil works engineer site

acquisition group for a new proposed BTS sites to complete the GSM network.

RF Survey for both coverage and capacity sites

Identification of Nominal’s and candidates identification.

Checking for the nearest site using MapInfo Tab files

Proposing the optimum GSM Antenna heights and sectorization

Preparation and submission of RND Technical Site Survey Report

RF Candidate Site evolution (Search Ring)

FIELD ENGINEER

NERA Philippines Incorporated

Ayala Avenue, Makati City, Philippines

September 16, 2008 – October 15, 2010

Scope of work:

MICROWAVE TRANSMISSION.

Transmission Engineer

(GLOBE upgrade and SMART Phase 8 Projects)

Conducts site survey, Line of sight verification, and provides Path profile using Pathloss 4.0

Performs RFI when required and provides site survey report

Planning of Microwave antenna tower location based to link budget, azimuth & height, waveguide run, waveguide entry to shelter porthole, microwave indoor terminal location, dehydrator, proposed rectifier, grounding and indoor cable run.

Microwave antenna installation, panning, and alignment

Ensuring that the Microwave antenna waveguides is installed properly, proper bending and grounding according to telecom standards

Performs testing, commissioning, troubleshooting on NERA PDH and SDH Microwave radios

Supervision of local installers of their Indoor & Outdoor installation activity

Rectification and troubleshooting on sites when needed.

RF BROADCASTING

RF Broadcast Engineer

( DVBH FTK Project Roll-out for GLOBE and SMART )

Involved in DVBH (Digital Video Broadcasting) turnkey projects for GLOBE and SMART (Mediascape) Telecoms

Involved in Cable TV Distribution of Mediascape CIGNAL Digital TV and Mormon’s Project

Roll-out installation of DVB transmitters (250W,3200W, 6400W) in Luzon, Visayas and Mindanao region

Responsible in installation and commissioning of transmitter equipments such as PDH Microwave Radios, Thomson Exciters, DD/PR, Layer 2 switch, Netprocessors, RF Amplifiers, UPS, Rectifiers, Cooling System, RF broadcast antennas(Omnidirectional and Panel), GPS(Global Positioning System) Antenna, etc.

Conducts survey, rectification, commissioning, software and hardware upgrades on transmitters

Conducts drive tests, actual field intensity measurements and signal quality assessment of transmitting stations

Conducts transmitter and Civil works PAT( Preliminary Acceptance Test) of newly installed sites

Supervision/Implementation of construction of the required standards for telecom companies

Responsible for the monitoring and troubleshooting of sites

Documentation Controller

Responsible for the compilation and/or production of proposed/asbuilt documents of transmitter sites to be submitted to the client

Responsible for the transmission of technical reports and documentations

AUTOCAD Operator

Responsible in detailed asbuilt drawings (data, electrical, grounding diagrams), floor plans and bracket design in AutoCAD 2D and 3D modeling

SYSTEMS ENGINEER

ELID (Electronic ID) Technology International Inc.

San Juan Metro, Manila, Philippines

July 16, 2007 – May 06, 2008

Scope of work:

Provides systems designs, estimates and quotation of electronic security systems such as electronic door access systems, biometrics devices, electronic barriers and CCTV cameras

Conducts surveys on site and proposed security systems based on the requirement of the client

Conducts presentation of security system products to clients

Conducts software and hardware support for clients

Conducts project inspections and monitors ongoing projects

Coordinates projects with internal and external clients

TECHNICAL SUPPORT ENGINEER

Cosmotech Philippines Incorporated

Chino Roces, Makati City, Philippines

June 29, 2006 – April 28, 2007

Scope of work:

Conducts field demo of the company’s products, projector to be specific

Conducts training on the proper usage and maintenance of the products

Do phone support, email, chat, and onsite support when situation requires me to do so

Responsible in surveying the areas for the installation of the products

Installation and quarterly check-up of projectors

TRAINING

FREELANCE RF DRIVETEST ENGINEER

To perform Drive Test for 2G/UMTS/HSDPA Services by using Nemo5.

Verify UMTS basic functionality(SMS,MMS,Web browse,Voice call tests..)

Verify Radio quality (BLER) requirement on several different radio services.

Verify Handover functionality performance.

Verify call success rate and call drop rate.

Verify neighbor relations list.

ON – THE – JOB TRAINING (PLDT) Philippine Long Distance Telephone Company

Baliuag, Bulacan, Philippines

May 5 – June 20, 2003

Responsibilities:

Conducts termination of twisted pairs on DDF ( Digital Distribution Frame)

Maintains proper lacing of cables and connections of DDF(indoor and outdoor)

Onsite troubleshooting of outdoor MDF(Main Dististribution) cabinets

Monitoring of newly applied and disconnected telephone lines

Skills:

Knowledgeable in using digital test instruments for testing and troubleshooting like Anritsu Site Mater,ETL & Spectrum, BER tester, Signal Level Meter, Power Meter, JDSU Ethernet tester, Analog and Digital Multi-tester,etc.

Basic knowledge on CISCO router and switch configuration.

Ethernet cable connectorization, splicing and termination of RF connectors, audio and video termination,and telecom cables.

Adept in AutoCAD 2D & 3D (Architectural /Mechanical)

Tower climbing / Riggering activities

Able to drive light wheeled vehicles

EDUCATIONAL ATTAINMENT

Fiber Optics Technician

Training Certification Course ( CFOT ) SubNET Services Ltd. / MFI Inc.. 2010

AutoCAD (2D & 3D Modeling) MERALCO Foundation Incorporated 2008

Bachelor of Science in Electronics and Baliuag University 2004 Communications Engineering (ECE) Baliuag, Bulacan, Philippines

TRAININGS AND SEMINARS ATTENDED

Attended professional trainings from Ericsson Academy

Ericsson LTE RBS 6000 Installation and Commissioning Certification Course

Ericsson Academy, Ericsson Compound

Riyadh, KSA

Ericsson Code and Ethics, Health and Safety Training

BATCO (Bayader Al-aryaf Telecommunication System Co)

Riyadh, KSA

Ericsson RBS Swapout Training

ERICSSON Telecommunication Inc., Bonifacio Global City, Philippines

Structured Cabling Training

St. Jude College, Sampaloc Manila, Philippines

Basic Computer Assembly and CCTV Installation

Valenzuela Community Hall, Makati City, Philippines

Digital Satellite

AVIM Center, Baliuag University, Philippines

CHARACTER REFERENCES

Engr. Neil Bongon

LIVING@SENSE INC.

Engr. Eugene Sedotes

NERA PHILIPPINES INC.

Engr. Dennis Mercado

HATCO

I hereby certify that all information above is true and correct.

RUFINO R. AGATI JR. III

Applicant

2G Engineer,3G Engineer,4G LTE Engineer,Field Engineer,RBS Engineer,Survey,Telecom Engineer,LOS,IP RAN,RBS Integrator,Microwave Engineer,Technician,Commissioner,Third Carrier,Implementation,Installer,Ericsson,Field, Wireless,

Dear Ma'am/Sir,

Good day!

I am Rufino Agati Jr III, working as a Telecom Engineer at SNS-BATCO, Ericsson-STC Project. I have experience in RBS 2G,3G and 4G LTE implementation. I have undergone a lot of trainings at Ericsson Academy and sooner I will be a Certified Ericsson Installer and Commissioner.I am very much interested in applying in your company. I have also experience in Microwave Transmission, RF Broadcasting, Fiber Optics Splicing, AutoCAD 2D & 3D.

You may contact me at +966********* or +639*********. I shall be glad to see you at your convenient time. Thank you very much. And I shall deeply appreciate hearing from you.

Rufino Agati Jr. III

Telecom Engineer

SNS-BATCO

applicant

Contact this candidate