Maintenance Engineer

RESUME

Carlos Eugene Lind

**** **** ******* *****

Austin, Texas 78728

Home: 512-***-****

Cell: 512-***-****

**********@*********.***

OBJECTIVE: A position as a Technician with opportunity for advancement.

EMPLOYMENT:

Applied Materials 12/2010 to Present

9700 US-290, East Austin, Texas 78752-4343

Position: Preventive Maintenance Technician @ Freescale Semiconductor 6/2011 to Present

Duties: Preventative Maintenance of the Mirra -200 & Mirra -200 w/ Nova & Ontraks DSS-200 and Provide Maintenance support of wafer fabrication equipment.

Position: Customer Service Engineer @ Samsung Semiconductor 12/2010 to 6/2011

Duties: Installation and Calibration of Applied Materials Reflexion, 300M LK CMP Tool Set. Perform standard Tier I procedures including wafer measurement. Set-Up Leveling of Tool, with customers ID.location with laser leveler lighting. Assembling all connections associated with the FI, Cleaner Station, Wet Robot Station, & Polisher Station. Perform preventative maintenance, became technically skilled in all of the Test Procedures: LDF Pad Conditioner & Clean-Cup Maintenance, Head RPM Verification, & Load Cup Wafer Exchange Calibration, Pad Conditioner Down-Force Box Calibration, Slurry Calibration / Verification, UPA Calibrations with RPM-3 calibration box & Running Beam set-up at FI Stations. Willing to learn all Tool Set's to get the job to job done.

FLEXTRONICS 6/04 to 12/2010

14258 Oak Knowles

Austin, Texas 78758

Position: Test Engineering Maintenance Technician

Duties: Provide Equipment and Technical Support to Manufacturing operations. Have PC skills, Office 2007, and UNIX. Familiar with pulling yield data and applying it to improve test equipment reliability. Good understanding of network setup and AC/DC circuits. Responsible for performing Equipment PM's, Installation and Manufacturing Rearrangements while working closely with Test Engineers and Manufacturing Supervisors and Planners. Examples of duties: Perform Equipment PM's. Maintain SAMMS database. Stock and adjust spare parts inventory. Clean and organize shop. Perform Emergency and Scheduled Maintenance on all Functional Test Equipment which will include but is not limited to - Testing communication,and setting up and modifying Test Stations, Changing Backplanes, replacing bent pins / damaged pins and connectors, working with live AC/DC voltage, upgrading and Modifying Equipment, Moving and Installing Test Equipment. Pulling cell Yield Reports and Repairing, working with Test Engineer's to improve Test Yields. Areas worked are follows: HFR / CRS-1, DF areas, GSR, CAT6, Box Build, MSSBU

Phillips Semiconductor Inc. 10/99 to 06/03

9651 Westover Hills Blvd.

San Antonio, Texas 78251

Position: Equipment Maintenance Technician T-4

Duties: Setup Preventative Maintenance Guidelines for Photo and Metrology Tools, along with daily maintenance to enhance tool up time. Provide Maintenance support of wafer fabrication equipment. Write Preventative Maintenance Spec's for the DNS Tracks. Implement new changes to tool, updates of Software after all has been tested. Do Weekly / Monthly PM's on a regular set time all within current Spec's Guidelines. Hazmat training, AN ERT TEAM MEMBER Direct Experience: Cannon's i3's -i4's - i5’s, DNS Electronic Track Tools, SKW-200, SKW-80B's, SKW-60A/80A Coater/Developer, SOG Tools, KLA Tools, Tencor (UV's) and a host of other Metrology Tools.

DNS Electronics 08/97 to 10/99

2315 Luna Road Suite 120

Carrollton, Texas 75006

Position: Technical Trainer - Lithography Products Division

Duties: Responsible for conducting training needs assessments, preparing learner and training guides, and developing / implementing technical/ operational skills training programs to address organizational needs such as continuous improvement of work process, productivity and quality. Very efficient with Power Point Presentations, and Excel as well as other software used for Training. PBET and First Texas Training certified and use both PBET/First Texas Training guidelines. Direct Experience: DNS Electronic Tack Tools, SKW-60A/80A Cater/Developer, SOG Tool with Vertical Furnace, and the SSW-60A/80A Double Sided Scrubber.

Motorola 07/95 to 10/96

3501 Ed Bluestein

Austin, Texas 78721

Position: CVD/CMP Equipment Maintenance Technician

Duties: Perform Preventative Maintenance of wafer fabrication equipment utilizing multi-disciplinary skills, electronic, mechanical high-vacuum, gas delivery and computer control systems. Calibration of Mass Flow Controllers and performing wet cleans, and seasoning of chamber. Injector changing per P.M. set hour for Watkins Johnson Tools. Rebuilding of Carriers, End effectors, Pad changing of both Oxide, Metal Ipec Planars. Replace brushes for OnTrak DSS-200. Generated Maintenance Procedures and Specifications, setup reordering guidelines for CMP Tools. Trained new technicians, and inspection of new tools at customer site. Performed Pass down report of tools conditions during shift with vendors. Direct experience: Applied Centura 5200, Applied Precision 5000, Watkins-Johnson Teos 999 APCVD Systems, Ipec Avantic 472 and OnTrak DSS-200.

UTI Instruments 05/90 to 07/95

2030-C Fortune Drive

San Jose, California 95131

Position: Field Service Engineer

Duties: Installation of Quadruple Mass Spectrometric Systems. Rebuilding of probes, changing filaments,

multiplier. Leak detection, process monitoring of gases over the range of 1 t o200 AMU. (Closed ion source) 10 to 10-3 Torr (5.32 x 10-2 to 1.33 x 10-2 Pa) (5.32 to 1.33 x 10-4 mbar). (Open ion source) 10-5 to 10-3 Torr (1.33 x 10-3 to 1.33 x 10-11 Pa) (1.33 x 10-5 to 1.33 x 10-3 mbar) Troubleshoot to component level. Calibration of RGA systems. Vacuum systems testing. Testing and documentation. Repairing and testing of RMAS. Proficiency in electronic, electronic tech., Mechanical or Vacuum Systems. Experience in Semiconductor Environment with exposure to Submicron wafer processing in Etch, Litho, CVD, thin films areas.

EDUCATION:

Heald Institute of Technology Associate of Applied Science

San Jose, California GPA 3.0

Lorain County Joint Voc. College Graduated

Oberlin, Ohio GPA 3.0

Southview High School Graduated

Lorain, Ohio GPA 3.0

CAREER PREPARATION:

Classroom instruction and laboratory, hands-on-training, and on the job training using Tektronix instruments in these subjects: Analog Circuits, Troubleshooting Circuits Digital Circuits, Circuit Analysis, Microprocessors Communications-Digital/Voice, Pascal Programming, Intro to Robotic and Lasers Assembly Programming, Technical Writing, IBM PC Computer, Repair Fiber Optics Modems/LANS MS DOS

Contact this candidate