Project Manager Mechanical Engineer
Resume:
Randy L. Hoilman
League City TX 77573
E-mail: ************@*****.***
Phone: 281-***-****
Summary
I have 26 years of extensive experience with rotating mechanical equipment.
In that time I have worked on a wide variety of equipment in an assorted
atmosphere. I have worked in food processing plants, trash burning plants,
chemical plants, paper mills, breweries, power plants, and a Bose
electronics manufacturer. In power generation, I have experience in
conventional, supercritical, simple cycle, combined cycle and co-gen (or
CHP), boiler plant or plant process industries. I have mechanical start-
up/commissioning experience with the following combustion turbines Alstom-
Stal GTX-100, GE LM 2500, GE/Alstom Frame 5N, and Frame 6B, Siemens-
Westinghouse (501D5A, 501FD2), and Caterpillar, Cummins, Detroit and
Wartsila diesel-gen sets with plant power production ratings ranging from
20 mw to over 1000 mw simple cycle as well as combined cycle. I also have
maintained/ and or commissioned boilers and HSRG's to include; ABB-CE,
Babcock & Wilcox, Babcock-Hitachi, Supercritical, Doosan, Foster
Wheeler/Detroit, and superheated and supercritical steam cycles. I also
have an expansive knowledge of Steam Turbine Generators including, but not
limited to ABB, Dresser-Rand, GE, Hitachi, Ingersoll- Rand, Siemens,
Toshiba, Elliott and Westinghouse. I have some operating experience with GE
Mark V & VI, and Siemens-Westinghouse. My positions held, and management
skills include personnel supervision (both union and nonunion), training
and management for all phases of plant construction, commissioning,
startup, and maintenance. I am a fully qualified individual capable of all
of the previous mentioned, and bringing any job along from the breaking
ground to start-up to steady state. My years of expertise are in fossil as
well as nuclear. I have planned, executed, and managed projects ranging
from $3M to $300M (part of a 2.6B job).
Professional Experience
Siemens (Turbocare Division) Houston, Tx. 10/17/11 till Present
Field service Manager
In my position as field manager I am in charge of reviewing and approving
proposals, budgets, and scheduling of all new bids incoming from
prospective clients. I also meet with customers prior to and after work is
completed to confirm that there were no issues. I perform job walk downs
and contract negotiation meetings as well.
Wood Group Pasadena, Tx. 4/19/11 till 8/26/11
Field Service Manager
In my position as field service manager I was in charge of reviewing and
compiling information for proposals and prospective clients. I performed
job walk downs to inspect for interferences and possible issues, as well as
to insure that all components were included in our proposal to the client.
I was also on site for the first few days of the outage to make sure there
was a smooth transition between the superintendent and plant contact. I
initiated contact with new customers to generate more proposals, and I
participated in contract negotiations as well. I developed the steam
turbine tool list that Wood Group uses now in their A-frame tool set.
Day-Zimmermann Peach Bottom 2/7/2011 till 3/25/2011
Turbine Manager
My position is to inspect their retrofit package's and schedule and attend
meetings with the customer to confirm that D/Z is ready and prepared to
execute this outage on schedule and under budget.
Alstom/Exelon Dresden Condenser Door Project 8/9/10 till 12/17/10
Project Manager
I helped with the project scheduling, cost and quality control. I conducted
meetings with the craft and the client to ensure workflow and productivity
was at an optimum level. I also expedited work packages for close out and
reported daily progress to the client. I provided guidelines to ensure
vendor compliance with plant specifications in conjunction with project
scheduling to define critical path, and schedule ties for the schedule to
be maintained. My duties also included supervision of union craft and
tracking of man hours. I helped create such documents as FME and safety
plans, ESH and installation risk matrix.
Areva Davis-Bessie Head Repair Project Port Clinton, Oh. 4/12/10 till
5/30/10
Project Superintendent
In my position as project superintendent I was in charge of all the
machining of the CRDM nozzle replacements. I provided technical direction
and managed the personnel, crews, and craft involved. The project required
the cut out and removal of 17 CRDM nozzles, and supported the
reinstallation of the reactor head.
Day-Zimmermann DC Cook Nuclear Plant 1/24/10 till 3/27/10
Project Manager Turbine Deck
In my position as project manager I was in charge of the overhaul of the
1100 megawatts turbine generator. I provided technical direction and
managed the onsite personnel, crews, and crafts involved. During the
overhaul we rolled out number 1 and number 2 bearings, we observed that the
babbitt was whipped out, as a result we had them rebabbitted. We also
rolled out the upper and lower oil seals and uncoupled the hp and lp rotor.
We repaired and installed the bearings. Then a coupling alignment was
done. Everything was in check so we reassembled. I helped with the project
scheduling, cost and quality control. I conducted meetings with the craft
and client. My work also included expediting the work packages for close
out and reporting daily progress to the client.
Areva Crystal River S G R Project Crystal River, FL. 9/09 till 1/15/2010
Project Superintendent
In my position as project manager I was in charge of the cut out,
machining, and welding of the steam generators. I provided technical
direction and managed the personnel, crews, and craft involved. This
project required cut out and removal of the old generators, and the
installation of the new areva steam generators.
Bechtel Trimble County Project Bedford, Kentucky 08/08 till 9/4/09
Senior Mechanical Engineer
In my position as senior mechanical engineer I was in charge of the
building, from the ground to completion, of all rotating equipment. I
provided technical direction and managed the onsite technical direction of
all personnel, crews, and crafts involved. This project required the new
installation of Howden ID, FD, and PA fans, as well as the new installation
of a Hitachi America 750MW steam turbine and generator. There was also the
installation of various conveyors, pulverizer motors, slurry pumps, sump
pumps, vacuum blowers, and an assortment of other equipment. I performed
project scheduling, cost, and quality control. I conducted meetings with
Howden and Hitachi to resolve technical issues. I provided guidelines to
ensure vendor compliance with plant specifications in conjunction with
project scheduling to define critical path, and schedule ties for the
schedule to be maintained.
Day-Zimmerman Westar Energy Topeka, Kansas 3/08 to 6/08
Project Superintendent
Daily oversight of all crafts on the job, as well as the running of the job
itself. This was an upgrade on a supercritical boiler. We replaced the
burners and 30% of the tubes. My oversight included subcontractors
replacing the precipitator, and rebuilding the turbine. I was also
responsible for manpower, loading schedules, vendor installation, test
scheduling, and the generation of start-up progress reports. My work on
this project included construction completion, precommissioning, and
expediting of the turn-over packages. I supervised the blow downs of all
steam lines and first fire of the boiler.
Shaw Group Oyster Creek Nuclear Forked River, New Jersey 10/07 to 12/07
Site Superintendent
Designated daily direction of all crafts on project. I also worked with
planners and schedulers to create a project schedule in tandem with
reporting daily progress to the client. This job was a dilution/intake
modification project. We removed and replaced all of the slides and gates
at the intake. We also performed several maintenance tasks in this time
frame.
Powerhouse Resources (8 jobs in one year) 12/6 to 10/07
Site Superintendent
Supervised and directed work of craft on approximately eight jobs in this
time frame. I also set up the schedule and budget for pump and motor
alignment. We worked on Sulzer pumps, Byron Jackson, Sulzer Bingham pumps,
Weir single and two stage, and multi stage pumps. We removed the motors and
sent them off for testing, and then we dissembled the pumps to replace the
seals and bearings. We then reassembled the pumps, installed the motors,
and realigned the pump shaft to the motor shaft.
Tri-Tool/ Areva (multiple jobs) 1/01 to 11/06
Mechanical Superintendent
Guided oversight of daily machining and mechanical operation of removing
and installing the CRDM nozzles under a BWR reactor head at Three Mile
Island nuclear plant in Pennsylvania. Also supervised the head change out
at Davis-Bessie nuclear plant in Ohio. My duties included supervision of
union craft, tracking of man hours, and I lent an active input into the
scheduling of all activities involving the head change out. Along with
these two jobs I supervised multiple machining and welding jobs throughout
the Unites States including steam generator replacements, valve machining,
upper and lower control valve seat removal and line boring machining of
steam turbine shells. Turbine stud removals also.
Qualified Contractors Corporation (multiple jobs) 99 to 01
Site Superintendent
I worked major overhauls on frame 5N and 7-FA gas turbines. My duties
included management of daily operations and commissioning of gas turbines
as well as the HRSG's within the manufacturers specifications, as well as
guideline enforcement for the safe operation of the plant.
PIC Craft Services (multiple jobs) 96 to 98
General Foreman to Lead Superintendent
I worked and completed numerous jobs in the time specified. I worked on
Siemens 501D5A combustion turbines, GE/Alstom5N and frame 6B gas turbines.
We performed everything from complete rebuilds to just bearing checks and
change out's. The frame 5 is a gas fired and has mark VI controls; the
frame 6B is a dual fuel capable crude oil distillery and has B Tec controls
(which is a modified mark VI). We also worked on various Siemens
Westinghouse and GE steam turbines during these years.
Turbine Generator Maintenance (multiple jobs) 91 to 95
Foreman to Turbine Director
I worked and completed numerous jobs for this company in the time specified
(approx. 30 to 35). In this company, at this time, you were a foreman then
a turbine director. I worked on GE steam turbines from 75mw to 750mw. I
also worked on GE7FA and 9A gas turbines. I also worked on Siemens-
Westinghouse 501D5A and 501FD2 turbines. In addition to this I worked on
Caterpillar-Cummins diesel generator sets with plant power ratings of 5mw
to 1000mw (simple and combined cycle).
QCI (multiple jobs) 98 To 90
Journeyman to Turbine Mechanic
I worked on a new installation of a GE 550MW turbine commissioning to start-
up and turn over, including turnover of documents. While on this job I was
a turbine millwright. I worked on control valves, blue checked bearings,
and tight wire alignments, together with tops on tops off alignments. I
also worked on boiler feed pumps assembly, generator assembly (such as
installing the bypass bars), as well as installing the stop valve in
conjunction with documenting all the readings and putting together a
turnover package for the client.
Carolina Power & Light Roxborough, North Carolina 87 to 88
Helper to Millwright Journeyman
I did everything rebuilding a 1500MW GE turbine, from cleaning parts to
honing shells, to the upper and lower control valves to tight wire
alignments, to stop valves. We also performed tops on & tops off wire
alignment. We pulled all of the diaphragms, reworked them, together with
removing all the buss bars from the generator and having them tested and
had them rewrapped and installed, we also did blue checks on all 6
bearing's and a lead wire check, and then we did an oil flush put it on
turning gear and then back on line.
Education and Training
Company -sponsored training: OSHA 30 safety; Portable Pipe Machining; GE
Advanced Heavy Rigging on turbine shells and rotors, Turbine Steam Path
Repair; Turbine Steam Path Inspection; Siemens Gas Turbine Training; Steam
Turbine Inspection Training, other: on site leadership training,
managerial training and safety training. I graduated from Mitchell High
School, in Baskerville, North Carolina in 1987. I obtained a Mechanical
Technology Associates Degree from AB Tech. in 1990.
Clearances
Nuclear Clearances Available
Passport Clearances Available
References
Carl Frazier 812-***-****
David McCoury 828-***-****
Darrell Caulk 502-***-****
Contact this candidate