test engineer of ict & flying probe test development
Resume:
ROY CRAWFORD SMITH
Reseda, CA, U.S.A.
OBJECTIVE: test engineer of ict & flying probe test development
EDUCATION: See below work history.
SUMMARY: Specializing in automated testing of electronic circuit cards, systems and subsystems used in Aerospace, Avionics, Automotive, Industrial, Medical, and Commercial applications.
Expertise in production testing with in-circuit and functional test hardware and software, flying probes, ESS, data collection and analysis (SPC), test coverage reporting, test fixture design; test, quality and standard operating procedures and flowcharts, root cause analysis, employee training, interviewing, benchmarking, team building, TQM, etc.
EXPERIENCE:
CTS EMS, Moorpark, CA
12/1990 to Production Test Engineer III
9/2012 Responsable for all areas of production test engineering. Agilent 3070, GENRAD/ Teradyne, Zentel 1800, SPEA 4040, Takaya 8400, Cablescan, Data I/O, AVR, Labview, HP Vee,
Technomatix Unicam, Fabmaster, Aegis, ESS, Vibration, data
collection and analysis (SPC), operational procedures, D2B,
Access, Xcel, Gerber analysis, UNIX, C, C+, Basic, VCL, etc.
Designed and implemented more than 50 in-circuit and functional test programs using Agilent 3070, GENRAD/Teradyne.
Designed and implemented more than 100 flying probes test
programs using SPEA 4040 and Takaya 8400 Integrated advanced functional tests on in-circuit and flying probes
Wrote more than 100 procedures for test, standard operations, QA.
Designed data collection interfaces for Quality Control.
Provided Sales with more than 100 quotations for test services.
Provided input to QBRs, sales proposals, SOWs, etc.
Researched and advised on test systems and software for test
applications.
Worked directly with customers such as CTS Auto, Philips,
Safenet, Astronics, Haas Automation, Cameron Health, CVRx,
Northstar Neuroscience, Raytheon, ACSS, Teledyne Controls,
Medtronic, Parker-Hannifin, Northrup-Grummon, NASA, EDO.
Awards: Shining Stars 2000, 2003,
9/1986 to America International Devices, Inc. L.A., CA
10/1990 SENIOR ELECTRONICS TECHNICIAN
Tested and troubleshooted to component level: Static and
Dynamic RAM modules for IBM System 36, 38, AS400, and
Sperry Unisys 1100/70. Wrote test procedures, collected failure data for quality control, ESS, maintained daily inventory of work in-process, worked directly with engineers, maintained testers, prototyped circuits. MS DOS, IBM PC, Oscilloscope, DVM, Logic Analyzer, etc.
11/1983 to ESL, INC. (Subsidiary of TRW) Sunnyvale, CA
7/1986 Electronics Lab Technician II
Tested and troubleshooted to the component level: PCBs,
subassemblies and subsystems used in RECONNAISANCE
EQUIPMENT including digital, communication, and
radiofrequency processors. Incorporated ECOs, validated test
procedures, built timer circuit prototypes for EAPROM erasing
equipment design, etc. Oscilloscope, EXORMACS emulator,
DVM, network, spectrum and logic analyzers, vibration, ESS.
Languages: Forth, Basic, MC68000 assembly language. Held
secret and COMSEC clearance. Used Mil-spec parts and
procedures.
10/1981 to General Electric CALMA: Milpitas, CA
11/1983 Production Test Technician, Intermediate Level
Tested and troubleshooted to the component level peripheral
interfaces and controllers that go with CALMA Interactive
graphic systems. Experience with Intel 8085, 8086, 8088
microprocessors. Oscilloscope, DVM, and Fluke Microsystem
Troubleshooter.
7/1980 to General Electric CALMA (continued)
10/1981 Electronic Equipment Assembler and Inspector
Assembled electrical subassemblies and cables that go with
CALMA systems. Inspected CALMA subassemblies including
PCBs, cables, card cages, and subassemblies.
1/1980 to SIGNACOM SYSTEMS, Inc. Burlingame, CA.
3/1980 Electronics Technician, Junior Level
Tested, troubleshooted and repaired digital intercom systems.
Knowledge of serial to parallel and parallel to serial data
conversion using UART and USART transmission and reception
of simple modulated signals over power lines for interoffice
communications.
U.S. Army, 1974 to 1976
Professional Education and Training
4/2012 Atmel - US-CA-Moorpak
AVR Studio 4.0 self-training
5/2011 Takaya TEXMAC - US-CA-Santa Clara
Certification
Takaya 9400 Flying Prober test design basic and advanced training
7/2011 Rockhurst Univeristy - US-CA-Burbank
Certification
Time Management and Organizational Skills
6/2010 Technomatix Unicam EM-Test Expert - US-CA-Moorpark
Certification
CAD Translation - Advanced training
7/2009 JTAG Technologies - US-CA-Torrance
Certification
IEEE-1149.1 Boundary-scan JTAG test design
6/2008 SPEA - US-CA-Santa Clara
Certification
4040 Multimode Flying Prober advanced training
6/2008 SPEA - US-CA-Santa Clara
Certification
4040 Multimode Flying Prober basic training
6/2007 National Instruments - US-CA-Woodland Hills
Labview 7.0 basic training
6/2006 Takaya TEXMAC - US-CA-Moorpark
Certification
Takaya 8400/9400 Flying Prober test design basic training
4/2005 National Instruments - US-CA-Anaheim
Test Stand basic training
6/2004 Technomatix Unicam EM-Test Expert - US-CA-Fremont
Certification
Fabmaster Gold basic training
9/2003 Cablescan - US-CA-Moorpark
Cablescan 1000 test design self-training
2/2002 Corelis US-CA-Cerritos
Certification
IEEE-1149.1 Boundary-scan JTAG test design
1/2001-12/2001 Computer Science - General-US-CA-Woodland Hills
5 classes completed for general computer science certification, 4.0 GPA:
UNIX, C, C+, Basic and Advanced IBM PC Repair and Maintenance, Computer System Architecture.
2/1998 GENRAD US-CA-Irvine
Certification
GENRAD ATE - Advanced Training
1/1998 GENRAD US-CA-Irvine
Certification
GENRAD ATE - Basic Training
1/1994 Hewlett-Packard US-CA-Cupertino
Certification
HP3070 ATE - Advanced Training
1/1994 Hewlett-Packard US-CA-Cupertino
Certification
HP3070 ATE - Basic Training
1/1993 NLP US-CA-Los Angeles
Certification
Basic Training in Neurolinguistic Programming
1/1992 Professional School US-CA-Los Angeles
Certification
Paralegal
1986-1990 various schools, colleges and universitys
60 units of classes in various disciplines, GPA 3.8
English literature and writing, foreign history, language and culture, comunications, etc.
8/1985 G.E. Calma US-CA-Milpitas
Certification
Cad Systems Training
6/1984 UC Berkeley US-CA-Santa Clara
Professional
MC68000 Microprocessor assembly language, programming, and computer design.
6/1982 San Mateo College US-CA-San Mateo
Certification
Electronics Engineering Technology
6/1980 San Mateo College US-CA-San Mateo
Associate Degree 3.8 GPA
Electronics
Dean's honor roll
Alpha Gamma Sigma
2/1976 U.S. Army - US-CA-Presidio
864th Construction Engineers
MOS Heating and Ventilation
Contact this candidate