Leroy (Roy) E. MANN

**** **** **

Austin, Texas 78757

512-***-****

ab961k@r.postjobfree.com

Professional Summary

System Engineering: Operating check-out procedures for electronic

subsystems, Organization level

repair/replace instructions, ATP's for subsystem procurement requirements.

Component Engineering: Part Control Programs (Mil-Std-965, Mil-Std-975),

requiring Non-Standard Part Approval Request (NSPAR) activity.

Streamlining programs per Mil-HDBK-965.

Parts Engineering: Part design support activity including; Selection, EEE

Parts per NASA requirements categorizing, PPSL's, Control Drawings, QPL's,

QSL's. Parts Obsolescence management projects.

Standards Engineering: Specification generation to support components,

including microcircuits screened to the requirements of Mil-Std-883, "S"

and "B" level. Procedure writing to support various groups.

Product Support/Quality Assurance: Involved in; Design and Material

reviews, Inspection Reviews, IPB/Manual Efforts, Maintainability,

Configuration Management. Maintained APL's/AVL's. Scheduling/ Expediting/

Planning of Electronic Components

Professional Development

Manager of Prime Contractor Parts Control Programs including; Consolidated

Automated Support System (CASS), Orbital Maneuvering Vehicle (OMV), Test

Equipment for F-15, Minuteman, HH-60 helicopter (CV-Helo), MH-53, V22 Tilt-

rotor Aircraft, and various SDIO projects such as; Star Project and

Midcourse Space Experiment (MSX).

Created and Maintained CDRL's/SDRL's for various requirements such as; Part

Standardization Plans,

Control Drawings, and PPSL's.

Created and Maintained a Engineering Data/Standardization manual for design

activities, have created Standard Operating Procedures (SOP) to support

topics as; Drawing Standards, Product Specifications and Supplier Rating

Systems.

ROHS workshop on understanding the impact of ROHS/WEEE directives.

Extensive liaison experience with Government agencies, clients, customers,

subcontractors, and suppliers.

Professional Experience

Fourteen years following retirement from Tracor in 1984, serves as

independent contractor working primarily in electronic and

electromechanical components engineering roles, focusing on Space and

Military-DoD projects.

CONTRACT PROJECTS FOLLOW:

Ball Aerospace & Technologies

Boulder, Co. 12/11 to 2/12

As a member of a PCB, dealing with NSPAR's on a NASA space program.

For DESC, Columbus, Oh. 6/09 to today

Assist in Writing/review/correcting SMD's for the Defense Electronics

Supply Center pertaining to Active/Semi-active/Passive components.

For: L-3 - San Diego, CA. 4/09 to 6/09

Served in the Component Engineering Department assisting in the selection

of high reliability components to be used in a Space project. . Parts

Obsolescence management reviewing for Hi-Rel components

For: BAE Systems - Manassas, VA. 4/08 to 12/08

Served in the Component Engineering Department supporting PAR's (part

approval requests) in support of Space projects (Aeries I, II). Parts

Obsolescence reviewing (tac-tec) and replacement recommendations

For: GE Healthcare - Salt Lake City, UT. 1/08 to 4/08

Worked in the Component Engineering Dept maintaining ROHS compliant

requirements for medical equipment. Worked with sub-contractors concerning

Supplier Change Requests for active electronic parts.

For: Wulfsberg Electronics - Prescott, AZ. 6/07 to 12/07

Performed component engineering (sustaining) effort supporting airborne

communication systems per FAA requirements. Involved in MRB activity for

problem parts in incoming/receiving. Assisted Purchasing in

expediting and scheduling of electronic parts.

For: Northrop Grumman - Lanham, MD. 1/07 to 03/07

Performed electronic parts control on Man-Rated Space programs. Member of

PCB team as component engineer. Ensured ECOs were complied with.

For: BAE Systems - Austin, TX. 6/01 to 10/03

Performed electronic parts management/standardization dealing with active,

semi-active, passive, and

electromechanical components. Managed a parts obsolescence program and

component cost analysis

against life purchases of active/semi-active devices.

For: EMS Technologies - Roswell, GA. 1/01 to 6/01

Maintained electronic parts manuals/BOM's for RF projects. Maintained end-

of-life projects pertaining to active components for legacy programs.

Expedited and scheduled electronic parts.

For: Coleman Aerospace - Orlando, FL. 10/98 to 1/01

Maintained electronic parts control programs for Military Aerospace drone

projects. Member of MRB monitoring parts flow through procurement,

receiving and inventory.

For: Bell Helicopter - Ft Worth, TX. 2/93 to 10/94, 4/95 to 10/95, 4/98

to 10/98

For multiple projects, on multiple occasions, performed parts control (Mil-

Std-965) on the V-22 Tiltrotor Aircraft for electrical and electro-

mechanical parts. Tasks included Component Specification generation for the

support of specific non-standard parts. One tour with Bell included the

generation of ATP's for support

of flight control surface systems.

For: Lockheed/Martin Corp. - Dallas, TX. 11/96 to 3/98

(Formerly Loral Vought Systems - Dallas, TX.)

Worked on the PAC-3 (Missile) project. As prime contractor,

responsibilities included parts control (Mil-Std-965), non-standard part

approval requests and part standardization on microcircuits and

semiconductors.

For: Woodward Governor Co. - Rockford, IL. 10/94 to 3/95

Tasks included the preparation of procurement documents for electronic

components used in the manufacturing of fuel control systems for commercial

aircraft.

For: Sikorsky Helicopter - Stratford, CT. 6/92 to 2/93

Worked on the parts control program (Mil-Std-965) for the MH-53 aircraft.

Responsibilities included engineering for electronic and mechanical

components.

For: Johns Hopkins, APL - Columbia, MD . 1/90 to 6/92

Performed parts control (Mil-Std-975) on Space program, man-rated parts for

the MSX project as a subcontractor to JHU/APL as prime contractor.

Responsibilities included the PCB component support for the other 35 sub-

contractors.

For: General Electric - Huntsville, AL. 9/88 to 11/89

Performed Mil-Std-965 electronic component activity as prime contractor for

the CASS project (Navy Test Equipment).

For: Fairchild Systems - Syosset, NY. 6/88 to 8/88

Performed parts control activity for the OMV (Space project) program.

Handled SCD's/SOCD's for active

Electronic and electromechanical components.

For: IBM Federal Sys Div - Owego, NY. 10/84 to 6/85, 6/87 to 9/87

Both tours involved Mil-Std-965 activity on the HH-60 (Aircraft) project,

primarily supporting mechanical components.

For: Ball Aerospace Div - Boulder, CO. 9/86 to 5/87, 10/87 to 5/88

Both tours, performed PCB activity (Mil-Std-975) for Space project

(Midcourse Space Experiment), supporting semi-active components.

For: Magnavox Electronic CO - Ft Wayne, IN. 5/86 to 9/86

Served as component engineer for passive parts on a PCB project for an Army

communication program.

For: Bendix Test Sys Div - Teterboro, NJ. 1/86 to 5/86

Performed PCB activity on F-14 Test equipment (Navy Project) supporting

mechanical parts.

For: Dressor Spenco Div - Austin, TX. 7/85 to 1/86

Established and maintained a component engineering department for a

commercial gas project.

PERMANENT DIRECT-HIRE POSITION FOR 17 YEARS:

Tracor Austin Aerospace - Austin, TX. 3/67 to 9/84

Served in the Component Technology/Standardization Group, writing

specifications for passive parts supporting various projects, both military

and commercial.

Excellent references for all employers available upon request

Contact this candidate