Electrical Project Manager

[pic]

BINOJ .K.VIJAYAN

E mail; ****************@*****.***, ******.*******@*****.***

Mobile no;894-***-****

Career Objectives:

To seeks opportunities to improve my performance and also

value my customers

opinions as a measure of my ability to provide high quality

products and services.

Summary Of Qualifications; [ 12 years experience]

.

. Basic experience in troubleshooting PLC's, CNCs machines.

. Willing to work overtime and am flexible.

. Able to keep a clean and orderly work area

. Responsible for electrical issues arising throughout the plant.

. Ability to diagnose equipment failures to determine cause

Able to isolate defects in wiring, switches, motors, and other

electrical equipment.

Strong ability to install and maintain motors, lighting

fixtures, generators, circuit breakers, and transformers.

Thorough knowledge of electrical systems including planning additions and

modifications on secondary circuits.

Can safely use hand and power tools applicable to trade.

Exceptional ability to install grounding leads.

Able to read commercial electrical blueprints and apply NEC through the

full range of commercial and industrial maintenance and construction work.

Experienced in installing and maintaining motors, welding equipment,

lighting fixtures, generators, circuit breakers, and transformers.

Can use appropriate tools and diagnostic equipment to repair, install,

replace, and test electrical circuits, equipment and appliances.

Excellent ability to diagnose and repair electrical controls, industrial

motor control centers, and programmable logic controllers.

Strong desire to study and comprehend new technology.

In-depth ability to make mathematical computations.

Able to work safely from ladders, scaffolds, hydraulic towers, or in

tunnels and crawl spaces.

Technical Qualifications

Diploma In Electrical/ Electronics Engineering (70.1%)

Educational qualification:

Pree Degree (62%)

SSLC (68%)

Employment History:

November 2006 to December 2012 ; AGS/AECOM /AC FIRST,LLC

Bagram Air Base, United State,

Senior Electrician

. Assemble, install, test, and maintain electrical or electronic wiring,

equipment, appliances, apparatus, and fixtures, using hand tools and

power tools.

. Connect wires to circuit breakers, transformers, or other components.

. Inspect electrical systems, equipment, and components to identify

hazards, defects, and the need for adjustment or repair, and to ensure

compliance with codes.

. Install ground leads and connect power cables to equipment, such as

motors, generators, transformers..

. Place conduit (pipes or tubing) inside designated partitions, walls, or

other concealed areas, and pull insulated wires or cables through the

conduit to complete circuits between boxes.

. Plan layout and installation of electrical wiring, equipment and

fixtures, based on job specifications and local codes.

. Prepare sketches or follow blueprints to determine the location of wiring

and equipment and to ensure conformance to building and safety codes.

. Test electrical systems and continuity of circuits in electrical wiring,

equipment, and fixtures, using testing devices such as ohmmeters,

voltmeters, and oscilloscopes, to ensure compatibility and safety of

system.

. Advise management on whether continued operation of equipment could be

hazardous.

. Direct and train workers to install, maintain, or repair electrical

wiring, equipment, and fixtures.

. Use a variety of tools and equipment such as power construction

equipment, measuring devices, power tools, and testing equipment

including oscilloscopes, ammeters, and test lamps.

. Work from ladders, scaffolds, and roofs to install, maintain or repair

electrical wiring, equipment, and fixtures.

. Trouble shooting of machines such as Transformers ( LT /HT),

induction motors, plasma cutting machines DIG welding machines,

Generators etc. under the presence of Supervisor and lead

Electrician .and also performing PMCS on electrical Load center

panels,cables,wires,circuit breakers and over load protection

Relays,contactors of motors etc. and keeps records,also insures

the proper Electrical grounding of machines, proper size of

ground wires, ground Electrode,circuit breakers, receptacles,and

GFCI breakers by under the rules of US National Electrical

Codes.

.

2003 Oct;10 to 2006 Nov;2 . Jimcap Electronics Pvt. Ltd,

Goa/India

Maintenance Engineer [ Electrical/Electronics,Generator & AC]

. maintenance,servicing and trouble shooting of electrical and

electronics parts of machines such as Lehbold Herautious (Germany

made ) and ( Italy made ), Arctronics (Italy ), Jognics (India) etc

for the production of film metalizing and capacitor ; and

also done the synchronizing of alternator, transformers, and

also maintaining air condition systems such as central plant

A/C Chiller plant a/c and heater at desired safety humidity and

heat level and also performing PMCS on electrical panels boards,

machines etc, and insures the grounding of machines, supply

systems etc and insure the ground resistance under desired

value of Indian electricity rule.

. Installed, adjusted, modified, verified, calibrated and tested operation

of power systems, specialized electrical systems and panels, circuitry,

electrical chassis, appliances, portable electrical equipment in

accordance with all State and Federal Electrical Codes and Ordinances.

. Able to work from verbal instructions, blueprints, wiring diagrams,

schematics, technical publications and instructions bulletins.

. Performed preventative maintenance on electrical panels and distribution

systems.

. Performed corrective repairs on commercial and residential buildings.

. Analyzed equipment failures .

. Made necessary adjustments to correct equipment failures while working

safely at all times.

. VFD and DC drive experience.

. Understanding of facility systems, e.g.HVAC, chillers, boilers, purified

water, compressed gases, etc.

. Proficient in reading an OHM meter and electrical diagram.

. Tested and adjusted equipment to obtain proper operating characteristics

.

. Rewired and installed panel boards and switches.

. Repaired AC/DC circuits, 3-phase circuits .

. Experienced voltage up to 480 three phase .

. Experienced in industrial equipment repair including motor controls (AC &

DC), electrical print reading and interpretations, trouble shooting of

control systems, and electric devices for high speed packaging/processing

equipment..

. Knowledge of Industrial wiring and controls.

. Basic understanding of hydraulic and pneumatic systems.

. Basic experience in troubleshooting PLC's, CNCs machines.

. Willing to work overtime and am flexible.

. Able to keep a clean and orderly work area

. Responsible for electrical issues arising throughout the plant.

. Ability to diagnose equipment failures to determine cause

. Job duties included, but were not limited to, electrical trouble

shooting, control wiring, welding, fabrication, power distribution and

other miscellaneous electrical and mechanical work.

. Trouble shooted, diagnosed and corrected electrical problems in the power

distribution, electrical equipment and lighting systems.

. Installed, removed, repaired, overhauled and tested electrical equipment,

both alternating and direct current. Worked to meet current electrical

codes and company policies and practices.

. Prepared, reviewed and maintained documentation associated with facility

electrical systems.

. Performed specific electrical maintenance and engineering functions

assigned by Engineering..

2001June;28 to 2003 Sept 21 HRJ Refrigeration and

Electrical Engineering Contractors. P. Ltd Cochin/ India

Senior Electrical/Electronics Technician

Traced out short circuits in wiring, using test meter.

Drilled holes and pulled or pushed wiring through openings, using hand and

power tool.

Examined electrical units for loose connections and broken insulation and

tightened connections, using hand tools.

Traced out short circuits in wiring, using test meter.

Measured, cut, and bent wire and conduit, using measuring instruments and

hand too

Performed semi-skilled and unskilled laboring duties related to the

installation, maintenance and repair of a wide variety of electrical

systems and equipment.

Disassembled defective electrical equipment, replaced defective or worn

parts, and reassembled equipment, using hand tools.

Examined electrical units for loose connections and broken insulation and

tightened connections, using hand tools.

Stripped insulation from wire ends, using wire stripping pliers, and

attached wires to terminals for subsequent soldering.

control and power wiring of Air condition such as Central

plant, Chiller plant, window, split and making schematic

Diagram,and also did the wiring and drawing of AMF panel of

Generator,various motor starter wiring such as DOL wiring,

STAR /DELTA wiring,etc. and also performing PMCS on electrical

panel, motor starter relays,contactors,single phase preventers, phase

sequence relay, Earth leakage Circuit Breakers and Grounding system,

etc under the Indian Electricity Rule.

Educational qualification:

Higher Secondary Course. (68%)

Pree Degree (62%)

Technical Qualifications

Diploma In Electrical Engineering (70.1%)

Computer Knowledge

. Ms Office: Word, Excel, Power Point, and Access

Achievements and Appreciations

. Awarded for Excellence - OPERATION ENDURING FREEDOM.

. Combined / Joint Task Force -1O1 CJ2. Roderick E. Sanders, Sergeant

Major, US Army CJTF -101 CJ2 SGM and Pierre D. Gervais, Lieutenant

Colonel, US Army, CJTF-1O1 CJ2.

. 3RD Battalion, 401ST ARMY FIELD SUPP0RT BRIGADE, Richard B. Dix, LTC,

Quartermaster commanding (7th June 2007)

. AGS/AECOM, Program Managers Award for War Time Service to the United

States Army. (Heyward O. Mac' MC Lendon, Project Manager, GMASS AGS/AECOM

(12TH February,2008)

. Certificate of Excellence AGS/ AECOM, (Talmadge Pope, Facilities

Director)

. Certificate of Excellence AGS / AECOM, (Ricky O. Guerrero Facilities

Manager.)

Personnel Skills

Cheerful, Outgoing personality, healthy, dependable and cooperative

worker carries a strong desire to achieve

and succeed.

Personal details:

Date of Birth : 22 February, 1981

Fathers Name

: Vijayan.k.r

Nationality : Indian

License No. : Kerala state electrical supervisor, b'

grade license No: 8817

Languages known : English, Hindi, Tamil and Malayalam for

spoken, reading & written

I here by certify that the above given information are true and

correct with best of my knowledge and belief.

Thank you,

yours Faithfully,

by,

Binoj.k.v.

Contact this candidate