Project Manager Mechanical Engineer

Europass

Curriculum Vitae

Personal information

Surname(s) / First name(s) Niculae Oprea

Address(es) Street Regiment 11 Siret, No. 27, block E7, flat 87, Postcode 800311, Galati, Romania

Telephone(s) Mobile: 004*-***-**-**-**

E-mail ************@*****.***

Nationality Romanian

Date of birth 04.10.1958

Gender Male

Desired employment / Occupational field Mechanical engineer naval / Mechanical engineer / Design engineer / Supervisor

Work experience

Dates June 2011 – September 2011

Occupation or position held Supervisor - Mechanical Department

Main activities and responsibilities Repair equipment; pumps cooling and lubrication main engine; engine room equipment (pumps cooling, fire, compressors, coolers, etc.); bowthruster; sternthruster; rudder; propeller shaft; hatch covers; main deck equipment.

1). make sure the work area is safe,

• 2). checking that all mechanics are wearing work and protection equipment,

3). analysing work schedule and assigning job teams,

4). providing technical support to each job,

5). providing technical documentation and explanation of steps to be followed by mechanics until completion of the job,

6). compliance with daily working hours and breaks under the program employer,

7). compliance with labor discipline and the Rules of Procedure of the employer,

8). preparing daily time sheets for mechanics and sending it to line managers.

Name and address of employer WEAR DOCK AND ENGINEERING CO. SOUTH DOCKS, SUNDERLAND, TYNE&WEAR SR1 2EE UNITED KINGDOM, Phone + 44 (0-750*-***-***

Type of business or sector Shipbuilding

Dates September 2001 – May 2010

Occupation or position held Mechanical Engineer - Job Preparation Department and Mechanical Department

Main activities and responsibilities Elaboration of technological instructions for alignment and mounting of the propeller shaft, rudder assembly, steering gear, propulsion installation (intremediate shaft, gear box, main engine and shaft generator), cargo pumps, azimuth thruster (Schottel type), steerable retractable thruster, bowthruster, cleaning and flushing of main engine and Diesel Generators (L.O., F.O., COOLING, COMPRESSED AIR SYSTEMS), bacteriological disinfection of potable water system, flushing hydraulic system, flushing of the hydraulic instalations cargo pumps+ drawing in AutoCAD measurement protocols, for projects: CAR CARRIER, PATROL VESSEL, FERROSTAAL, 800 TEU, HEAVY LIFT I + II, TANKER 3100 5000 TDW, PELIKAAN (LSV), OPV, VROON, RO-RO FERRY, AHTS, BUNKER BARGE, PIPE LAY BARGE, HOV, STAN TUGS, ASD, WSS,

Elaboration of the large requirement tools and device for mounting equipments and miscellaneous engine room outfit,

Market research and purchase of complex device equipment (Ex. Laser Easy laser”, hydraulic equipment Hytorc” for tightning at moment screw,

Planning My Primavera, Departament of Mechanical production section (in period, August 2008-May 2010):

1). preparing activity work plan for each foreman in his section with My Primavera software, cheecking activity execution stages of the ship,

2). weekly update in My Primavera of progress for activities planned for the week,

3). daily completion of the “Dashboard” document,

4). weekly and monthly calculation of productivity coefficient “KPI”, planned activity acceptance coefficient “D” and sending it to line managers,

5). weekly and monthly drawing graphs of productivity coefficient “KPI”, planned activity acceptance coefficient “D” and sending it to line managers,

Name and address of employer DAMEN SHIPYARDS GALATZ, Street Alexandru Moruzzi No. 132 GALATI, Phone +40-236-**-**-**.

Type of business or sector Shipbuilding

Dates January 1989 – August 2001

Occupation or position held Mechanical Engineer – Design and Technology Department

Main activities and responsibilities For projects OFFSHORE JACK UP DRILLING UNIT, RO-RO, CARGO VESSEL, OIL TANKER, BARGE:

1). responsible for the ship budget and keeping under control its,

2). responsible for overall management of projects from conception to completion,

3). ensuring the production department with materials, equipment, tools and necessary documentation for the production process,

4). preparing estimates for additional work requested by the Customer,

5). preparation of price estimates for new vessels to be contracted and ships in repair,

6). studying technical books aggregates and equipment mounted on board ships, calculating qualities and quantities of oils and fuels necessary for operation (commissioning), sent to the Purchase Service.

7). establishment and sending to the Purchase Service the necessary of materials, components, devices and necessary works in ships,

8). procedure review and revision if required, in conjunction with project engineer,

9). ensure that all operations are undertaken in a safe manner in accordance with Romanian law and project,

10). technical and logistic support.

Name and address of employer DAMEN SHIPYARDS GALATZ, Street Alexandru Moruzzi No. 132 GALATI, Phone +40-236-**-**-**, Fax +40-236-**-**-**

Type of business or sector Shipbuilding

Education and training

Title of qualification awarded Bachelor Degree - Mechanic engineer

Principal subjects/occupational skills covered Materials Technology, Mechanics, Technical Drawing, Strength of Materials, Metal processing and dimensional control, Machine, Hydraulic driving, Heat Engines, Machinery - equipment, Organizing work,

Name and type of organisation providing education and training Faculty of technological Equipment - Institute of Construction Bucharest

Level in national or international classification University studies

Personal skills and competences

Mother tongue(s) Romanian

Other language(s)

Self-assessment Understanding Speaking Writing

European level Listening Reading Spoken interaction Spoken production

English B2 B2 B2 B2 B2

Franch A A A1 A1 A1 Common European Framework of Reference for Languages

Social skills and competences Experience in organizing assemblage activities for naval equipments,

Experience, force of work and knowledge,

Experience in teamwork, comunication skills,

Quick learning capacity.

Organisational skills and competences Auto-motivation, Earnest, Responsable, Working efficiently,

To draw out from the planning program “My Primavera” activities that are planned during that month, completion of monthly work plan for each Foreman in the Mechanical Department, check status of implementation of activities in vessel,

I was teacher for workers upgrade courses program in DAMEN SHIPYARDS GALATZ.

Technical skills and competences Responsible for supervision and technical inspection of facilities/equipment RSVTI – authorized ISCIR.

Participation in the Seminar Shaft Alignment and Powertrain Vibration” By Chris Leontopoulos American Bureau of Shipping, Piraeus, Greece, Location: hotel IAKI, Mamaia–Romania. Date:04. 07. 2008,

Writing together with four colleagues from DAMEN SHIPYARDS GALATZ the books mechanical naval (internal use only),

Solid knowledge and experience of mounting naval equipment:

1). use during welding of stern tube the Laser to ensure concentricity bearings,

2). mounting of Laser into the driving motor axis and keeping the alignment under control during Schotel welding,

3). calculating the forces obtained at mounting bearings in the stern tube and verification of nominal values,

4) checking the forces of bearings installation propulsion (stern tube bearings, intermediate shaft bearings, reduction gear) after alignment gearbox - calculation of the bearing reactions,

5). fastening the gearbox, main engine on foundation with epoxy resins (Epocast, Chockfast),

6) mounting bolts stretch used to the fix of main engine on the foundation, radial fit bolt (type SKF, PILGRIM),

7). fastening the main engine and diesel generator on resilient mounting,

8). fastening the shaft generator on chocks type Vibracon,

9). tightening the screws using device hydraulic Hytorc at torque moment specified,

10). for the flushing hydraulic system and flushing of Main Engine and Diesel Generators L.O., F.O., COOLING Systems in the washing diagrams I introduced additional equipment which involves insurance calculations of flow, pressure, flow rates for inner cleaning of installtion (pumps, filters, provisional piping),

11). fitting the rudder stock into the rudder blade using oil injectors for expansion (high pressure) and hydraulic nut to hold the cone,

12). mounting steering gear - Rolls-Royce type “Tenfjord” SR 722…..743,

13). mounting of Vesconite, Thordon bush cooled in liquid nitrogen in the rudder trunk lower bearing.

Computer skills and competences Work experience with AutoCAD (2D - 9 years experience, 3D good Knowledge-volumes modeling), design program CAD STEEL”, MSOffice (Word, Excel), Planning My Primavera, Internet Communication.

Other skills and competences Training course Project Manager, September 2012 Bucharest – accredited CNFPA.

Planning My Primavera training course, Departament of Mechanical production section. – February 2009.

Training course Laser « Easy Laser », March 2007.

Driving licence B since 1996

Additional information Contact person for references (DAMEN SHIPYARDS GALATZ):

1) Project Director – Ovidiu Bejan, E-mail ******.*****@*****.**

Phone 004*-***-***-***

2) Project Manager – Stefan Gherghe, E-mail ******.*******@*****.**

Mobile 072*-***-***

Contact this candidate