POST APPLIED FOR: QA/QC INSPECTOR/ WELDING INSPECTOR/Sr.WELDING INSPECTOR /PAINTING INSPECTOR /LEAD AUDITOR

OBJECTIVES

To quest for a job in a highly competitive environment that will enables me to scope up with the latest development in the inspection industry and to secure a permanent position in a high growth and high paying company with considerable advancement opportunities.

Skills:

Conversant with international standards like API-1104, ASME-IX, ASME-B31.3, ASME-B31.8, AWS D1.1 pertaining to Piping, Pipe Line, Storage Tanks, Pressure Vessels, CROSS COUNTRY PIPE LINE, Equipment Erection & Installation AND Valve Inspection.

Proficient in PC usage. Advanced user of computer programs like MS EXCELL.

CAREER PROFILE:

A AWS Certified welding inspector (CWI),CSWIP 3.1 AND 3.2 and worked as QC Field of QA/QC Inspector/NDT Inspector/Field Supervision / welding inspection with Fifteen (15) Years extensive experienced in oil and gas construction projects, Refineries, power plant. Major activities involved general oversight of the fabrication/construction activities from quality and good engineering practice stand point. Activities involved in Welding inspection (piping, pipeline, Storage tanks, silos and structural), piping/Pipeline fabrication and welding inspection, material inspection, punch listing/walk through inspection, hydro test inspection, turnover documents and pre commissioning activities.

EDUCATIONAL QUALIFICATION:

• Bachelor of Technology (Mechanical Engineering) from Rajasthan Vidyapathee University Rajasthan ( 4th Semester Completed)

• Master of Business Administration from University of Madras

• Bachelor of Business Administration from Annamalai University.

AWS - Certified Welding Inspector (Cert. No.08071871- Exp-01July 2011)

CSWIP 3.1 Welding Inspector (Cert. No. 44947 Exp:07 Nov 2014)

CSWIP3.2 Sr.Welding Inspector(Cert.No: 53051 Exp:27 Nov 2015)

QMS Lead Auditing (IRCA Cert.No:40452)

B.Gas Gr.3/2 Painting Inspector (Waiting for Result)

ASNT Level II in RT, MT, PT & UT.

EMPLOYMENT DETAILS:

August 2010 to till date

Employer : BETZ ENGINEERING ZONE, Chennai.

Position : QA/ QC Inspector

Client : (1) Nuclear Power Corporation of India Ltd., MAPS, Kalpakkam, Chennai.India.

Responsibilities:

Inspection of Raw Material and consumables as per the Correlated Material Test Certificate & Dimensions.

Preparation & Qualification of Welding Procedures & Welders for CS, AS, SS, Materials as per ASME, AWS & API codes.

Inspection of welding consumables like electrodes, filler wire, flux, shielding gases etc. as per the specification / mill certificates, before Issuing for construction.

Witnessing of welders qualification tests for SMAW, GTAW, etc

Preparation, Review of NDE Procedures & Interpretation of weld discontinuities by various NDT methods like RT, UT, DPT, MPT & Visual Examinations as per code requirements.

Preparation of project Quality plans, Welding Procedure Specification for Piping.

Co-ordinate with clients and Inspection agencies.

November 2008 to June 2010

Employer : RI DONG Corporation Pte Ltd, Singapore.

Position : QC Welding Inspector/ PAINTING SUPERVISOR

Client : (1) CPGC – CH2M HILL.

(2) Shell Seraya Pte Ltd.,

(3) SHELL Ethylene Cracker Complex Boiler in Pulau Ular project

Responsibilities:

Stage wise inspection of Piping, Storage tanks & pressure Vessel.

Preparation & Qualification of Welding Procedures & Welders for CS, AS, SS, Materials as per ASME, AWS & API codes.

Witnessing of welders qualification tests for SMAW, GTAW, FCAW etc.

Inspection of welding consumables like electrodes, filler wire, flux, shielding gases etc. as per the specification / mill certificates, before Issuing for construction.

Preparation, Review of NDE Procedures & Interpretation of weld discontinuities by various NDT methods like RT, UT, DPT, MPT & Visual Examinations as per code requirements.

Valve Inspection in all stages.

Inspection of in-coming Piping and Mechanical materials for confirmation with Purchase Orders, Relevant Codes, Standards and Specifications.

Piping material Identification as per the Isometric drawings, material take off and PMI reports before pre-fabrication of pipe spools.

Responsible for inspection of fabrication, welding and installation of pipe spools and Structural Steels as per the approved QCP/ITP, ASME and API section series.

Dimensional check, Fit-up, weld visual and NDT Inspection of Pressure vessel, Piping & Structures as per Codes and standards.

Interpretation of RT films, reviewing inspection reports and coordinating with subcontractors and clients for necessary test requirements if any,

Responsible for preparation of piping test packs, line checking, punching prior to Hydrostatic and pneumatic test.

Preparation of Test packs for as per the Project Specification

Coordinating with third party inspection for necessary NDE requirements.

Co-ordinating with client's project inspection unit and the subcontractor for necessary inspection for witness and hold points.

December 2007 October 2008

Employer : Lotus co, Chennai.

Position : QC Inspector & NDT Co-ordinator

Client : Chennai Petroleum Corp Ltd

Responsibilities:

Review all applicable drawing and standards to ensure that base metal and filler metal are properly specified.

Verifying chemical composition and mechanical properties of material and condition and storage of filler metal, base material.

Verify that the welders, welding operator and tack welders have been properly qualified and the welding is performed in accordance with applicable codes, specification and drawing.

Check the materials if it is as per specification and visual check if it is free from deformation or any damage from transportation.

Co-ordination of shop and site fabrication of pipe spools and structures and erection works, engineering design, purchase, and procurement and planning.

Preparation of project Quality plans, Welding Procedure Specification for Piping.

Co-ordinate with clients and Inspection agencies.

Conducting Welder Qualification for Piping as per the Project Specification & ASME Sec IX Co-ordinating with NDT, Labs.

Carryout the visual inspection before, during and after welding

Monitoring the preheat temperature before welding and inter pass temperature during welding.

Surveillance of welding parameters and technique for compliance with welding procedure and the storage of electrode as manufacturer recommendations.

Witnessing all weld joint root pass after cleaning, weld joint geometry, weld size and weld appearance.

Conducting In process examination of joint fit up, cleanliness and variables specified by the joining procedure including filler metals, interpass cleaning.

Preparation of Inspection Request and maintain the inspection Reports.

Record and mark the material traceability on the materials such as the Heat no of the pipes, spool no, drawing no, weld no and welder symbols.

Co-ordinates with NDT Tasks for RT, UT, MPI & DPT.

Interpretation of Radiography Films.

Monitor the weld repair activity from marking the location of defects, grinding and welding as per approved weld repair procedure.

Preparation of Fabrication Control Sheet, Test packs for piping.

Nov 1997 to October 2007

Employer : MABEL Engineering Pvt Ltd, Chennai.

Position : QC Supervisor/NDT Technician

Client : Kochi Refineries Ltd

Chennai Petroleum Corp Ltd,

Bharath heavy electrical limited

Responsibilities:

Co-ordination of shop and site Erection of pipe spools and structures and erection works, engineering design, purchase, and procurement and planning.

Preparation of project Quality plans, Welding Procedure Specification for Piping.

Preparation of procedures, method statements, and check compliance with project specifications.

Co-ordinate with clients and Inspection agencies.

Conducting Welder Qualification for Piping as per the Project Specification & ASME Sec IX Co-ordinating with NDT, Labs.

Inspection of welding consumables like electrodes, filler wire, flux, shielding gases etc. as per the specification / mill certificates, before Issuing for construction.

Preparation, Review of NDE Procedures & Interpretation of weld discontinuities by various NDT methods like RT, UT, DPT, MPT & Visual Examinations as per code requirements.

Inspection of in-coming Piping and Mechanical materials for confirmation with Purchase Orders, Relevant Codes, Standards and Specifications.

Dimensional check, Fit-up, weld visual and NDT Inspection of Pressure vessel, Piping & Structures as per Codes and standards.

Interpretation of RT films, reviewing inspection reports and coordinating with subcontractors and clients for necessary test requirements if any,

Responsible for preparation of piping test packs, line checking, punching prior to Hydrostatic and pneumatic test.

Coordinating with third party inspection for necessary NDE requirements.

October 1995 to October 1997

Employer :BABU ENGINEERING CORPORATION, Neyveli.

Position :QC Supervisor/NDT Technician

Client :II Thermal Power Station Neyveli.

GMDC Lignite Projects, Gujarat.

Responsibilities:

Inspection of Raw Material and consumables as per the Correlated Material Test Certificate & Dimensions.

Conducting In Process Inspection and Report Preparation.

Co-ordination with Third Inspection, Client.

NDT work carried out as per requirement such as RT, UT, MPI & DPT.

Preparation of weld map and NDT requirements for Piping.

Visual inspection conducted shell joints, roof joints, and bottom plate joints.

Conducting Stress Relieving for pipe joints

Interpretation of radiography Films

Preparation of Final Dimensional Check Reports .

Arranging Periodic calibration for Pressure Gauges and Instruments.

Conducting Chemical Cleaning like Pickling & Passivation for SS Piping & Silos.

Preparation of Test packs for as per the Project Specification.

Knowledge in Preparation of Data Folder as per client Requirements.

Personnel Details:

Father’s name : V. SRINIVASAN

Date of Birth : 14 / 06 / 1972

Marital Status : Married

Nationality : Indian

Passport No. : G8479929 Valid up to 05 / 05 / 2018

Date of issue : 06/05/2008

Place of issue : Chennai

Contact this candidate