Engineer Design

JOHNNIE JOHNSON

**** ********** *****

Sherman, Texas 75092

Email: **************@*****.***

Phone: 269-***-**** or 903-***-****

Summary of Qualifications:

ANSI Y14.5M, ISO 9000, DOD-STD-1000, MIL-STD-100, Federal Aviation Administration Standards, 16G Standard (Aircraft), Windows Office, Agile, NEC,Lotus, SAP, Geometric Dimensioning and Tolerancing, Tolerance Stack-ups, ATA Standards, CADDS5/4X, Pro-Engineer (2001, Wildfire 2.0, 3.0 & 4.0), Pro-Cable, Pro-Sheetmetal, Pro-Intralink, PDM/Link Windchill.

Education:

A.A.S. in Mechanical Engineering Technology, Triangle Tech, Pittsburgh, Pa - 1986

Certificates in Pro-E, Pro-Cable & CADDS5, Parametric, CAMU & Mechanical design

Experience:

11/11 to 4/12 – Weber Aircraft/Zodiac Aerospace, Gainesville, Texas (Contract)

Pro-E/Pro-Cable Aerospace Designer - Worked with company engineers in the Design, Testing and Manufacturing of Commercial Airseat Mechanisms for all the Major Airline Carriers (Boeing, Airbus, etc…)…Duties include utilizing Pro-E Solid Modeling, Pro-SheetMetal, Pro-Piping, and Pro-Cable in the design of Aircraft Seat components such as; Frame, Cushing, Armrest, Backs, Tray Tables, Video and Phone Handset mounting locations…Aircraft seats are engineered and designed in compliance with Federal Aviation Administration standards and guidelines...Also utilized Pro-Cable in the 3D routing of large Wire Harness and Conduit assemblies. Created Family Tables, Shrinkwrap & Simplified Representation of large Assembly Models. Release models, drawings and BOMS in PDM/Link Windchill.

5/10 to 10/11 – Schindler Elevator, Randolph, NJ (Contract)

Pro-E/Pro-Cable Designer - Worked with company engineers in the design of elevator systems for low- to mid-rise commercial and residential buildings. Duties include utilizing Pro-E Solid Modeling, Pro-SheetMetal, Pro-Piping, and Pro-Cable in the design of elevator components such as; Elevator Car, Door, Hoistway, Controller, Belt Drive Power Unit, and Motor. Also utilized Pro-Cable in the 3D routing of large Wire Harness and Conduit assemblies. Created Family Tables, Shrinkwrap & Simplified Representation of large Assembly Models. Release models, drawings and BOMS in PDM/Link Windchill.

6/09 to 3/10 - Whirlpool Appliances, Benton Harbor, Mi (Contract)

Pro-E/Pro-Cable ElectroMechanical Designer - Worked with company engineers in the design large household appliances such as; Refridgerators, Dishwashers, Washer and Dryer units. Duties include utilizing Pro-E Solid Modeling and Pro-SheetMetal in the design of components such as the motor, door lids, consol tops, and brackets for the Washer and Dryer units. Also utilized Pro-Cable in the 3D routing of large wire harness assemblies. Created Family Tables, Shrinkwrap & Simplified Representation of large Assembly Models. Release models, drawings and BOMS in PDM/Link Windchill.

10/08 to 5/09 - John Deere Product Engineering Center, Waterloo, Ia (Contract)

Pro-E Automotive Designer - Utilized Pro-E Solid Modeling and Pro-SheetMetal to create engine

components such as manifolds, heatshields, support brackets, engine block castings, etc... Utilizing Pro-Cable in the design of engine wire harness assemblies. Produced detail and assembly drawings from solid models and produced parts list and BOMs of assemblies to formats in Pro-E Wildfire 3 and PDM/Link Windchill. Utilized Family Tables, Shrinkwrap & Simplified Representation of large Assembly Models.

5/05 to 09/08 - Varian Semiconductors, Gloucester, Ma (temp contract)

Pro-E ElectroMechanical Designer - Worked with company engineers in the design of

semiconductor tools which included; utilizing Pro-Cable in the routing of large cable

and harness assemblies, utilized Pro-E Wildfire 2.0 in the design of all electromechanical

components, E/M Packaging and sub-assemblies. Utilized Family Tables, Shrinkwrap & Simplified Representation of large Assembly Models. Release models, drawings and BOMS in PDM/Link Windchill.

7/02 to 5/04 - Square D Engineering, Cedar Rapids, Ia (temp contract)

Mechanical CAD Designer- Duties also included 3D modeling of switch gear components using parametric design and GD&T on Pro-Engineer. Assisted company engineers in the design of castings for plastic infection molded parts. Also work on large assembly databases using Pro-E.

1/01 to 5/02 - Ethicon, Cincinnati, Ohio

Mechanical CAD Designer - Duties included 3D modeling of laparoscopic medical devices components using parametric design and GD&T on Pro-Engineer. Assisted company engineers in the design of castings for plastic infection molded parts. Also work on large assembly databases using

Pro-E & Computervisions CADS4X.

11/98 to 11/00 - General Electric Switch Gear Operations, Burlington, Ia (temp)

Electro/Mechanical Designer- Duties also included 3D modeling of switch gear components,

wire harnesses, cableways, and electrical schematics using Pro-E & CADDS4X.

1/98 to 10/98 - Raytheon Missile Company, Tewksbury, Ma (temp contract)

Aerospace CAD Designer - worked with engineers on the Design of the Electrical

systems, Cable Harness Routing, outer hull and structure design for the PATRIOT Missile Program

using Computervisions CADDS4X & CADDS5.

5/96 to 12/97 - Rockwell Automotive, Troy, Mi (temp contract)

Mech CAD Designer - Responsible for mechanical design of castings, plastic injection

parts, and printed circuit boards. Work done using parametric and solid modeling on

CADDS5. Utilized geometric dimensioning & tolerancing on all designs.

6/94 to 10/95 - Benteler Industries, Kalamazoo, Mi

Automotive Designer - Assisted company engineers with the design of engine manifolds,

frame and suspension components. All models created in 3D utilizing Computervisions

Parametric CADD Software.

11/93 to 5/94 - Hughes Satellites and Telecommunications, El Segundo, Ca (temp)

Aerospace CAD Designer - Designed and detailed satellite components, frame structure,

rack assemblies, cableways and wire harnesses. Modeling done using Computervisions CADDS5.

6/92 to 10/93 - Hughes Flight Simulations, Herndon, Va -(temp contract)

Aerospace CAD Designer - Worked with company engineers with the design and development

of the U.S. Naval HoverCraft Flight Simulater, also known as: LCAC (landing craft, air cushioned)

Worked on Frame Structure, Suspension Systems, Cableways and Harness Routing

All 3D CAD Modeling done using Computervisions CADDS 4X.

9/86 to 4/92 - Various Cad positions at the following companies:

Ford Motor Company, Dearborn, MI - Automotive Designer

Johnson Controls Inc., Plymouth, MI - Automotive Designer

Sperry Marine, Charlottesville, Va - Tool & Die Designer

Bath Iron Works, Bath, Me - Tool & Die Designer

Gibbs & Cox, New York, NY - Naval Architectural Design

Contact this candidate