Quality Engineer
Resume:
RESUME
JOWARDY V.PABIONA
TAMPINES, SINGAPORE.520385
CP # +65 93802705
SUMMARY BACKGROUND
Five (5) yrs of experience in Aerospace Manufacturing as a Quality Assurance. Seven (7) years in Metal Stamping and Tool/Die fabrication and maintenance as Process Engineering and Quality Part Inspection for Industrial electronics parts and automotive components.
More than one (1) year in hard disk drive manufacturing as a Failure Analysis and Product Inspection.
QUALIFICATION(S)
• Have a knowledge in ISO 9000,ISO 1400 and TS 16949 ( International Standards )
• Trained and qualified for Internal and External Quality Audit
• Have a knowledge in different methodologies and problem solving techniques such as:
o APQP ( Advance Product Quality Planning )
o Six Sigma ( DMAIC )
o PPAP ( Production Part Approval Process )
o Kaizen, 7 QC tools, 8D Problem Solving Technique, Poka-Yoke ( error proofing )
o FMEA ( Failure Mode And Effect Analysis )
o Product Management Plan and Control ( PMPC )
• Full Knowledge to handle and create a program for CNC measuring Instrument Such as :
o CNC-CMM ( Coordinate Measuring Machine ) ex. Calypso, Geopak, Quindos, UMES, Pcd mis
o CNC-VMM ( Video Measuring Machine ) ex. Smart scope
• Have a knowledge in AutoCAD, Solid Works and Uni-graphics NX Designing Software
• Able to make Jigs and fixture Design and trouble shooting
• Able to handle and operate machines such as:
o CNC Tapping Machine
o Lathe machine, Surface grinder, milling machine and etc.
• Able to use simple measuring equipment ex. callipers, height gauge, micrometers, profile projectors, Dial bore, etc.
• Able to handle Eddy Current testing. ( level 1 limited)
EMPLOYMENT HISTORY
THE COMPANY: Hamilton Sundstrand Singapore
An Multi National Aerospace Manufacturing, a precision machining that provide Aerospace components Such as: turbines, gear box, fluid pumps, compressor, IDG covers, housing and etc.
LENGTH OF STAY: April 2007 to Present
POSITION: Quality Engineer (Jan 2010 ~ Present)
DUTIES:
• Responsible for creating new CMM program for new product parts and Development.
• To developed inspection techniques to improve product validation.
• Initiate and lead Inspection improvement to improve efficiency and productivity
• Lead Process Improvement Projects
• Verify and Validate Process Cause and corrective action and monitor implementation and its effectiveness.
• Lead process certification such as SPC and Data Gathering.
• Work closely with the Manufacturing Engineer to provide Process Improvement and provide high Quality Product at low cost and reduce cycle time.
• Responsible for Quality Man power planning to support production.
• Review Non-conforming products and provide necessary disposition
• Monitor Production Performance thru graphical presentation of collected Reject data of cost of poor quality.
• Validating Process thru implementation of GR&R, SPC and feedback tool analysis
POSITION: QC TECHNICIAN/CMM PROGRAMMER (April 2007 ~ Jan 2010)
DUTIES:
• Responsible for CNC CMM measurement and programming
• Conduct Incoming, Outgoing and Final Inspection that includes Dimensional and visual Inspection
• Perform Blank Inspection
• Perform First Article Inspection -Delta FAI/Full FAI ( part Inspection And Data Gathering)
• Eddy Current Inspection
THE COMPANY: MIYOSHI TECHNOLOGIES PHILS.
A multi National Company, a Metal Stamping Industry that produces Industrial Electronic Components Such As: Fax machine, printers Hard Disk Covers Etc. And Automobile Components such as: Mufflers, and other external engine and non engine parts.
LENGHT OF STAY: July 2000 to April 2007
POSITION: Quality / Process Asst. Manager (Apr 2006 to Apr 2007)
ACCOMPLISHMENT:
• Initiated and leaded the Cost Reduction Group and able to save USD 3K – 4K in every month
• Initiated the improvement Task Force that concentrated in dealing with process Analysis and problem Solving. Were lower down the defect rate from 12% to 2.3%
• Implemented the Marshalled part concept the eliminated the missing components problem.
• Designed and implemented the semi Automated CMM checking that decreases the inspection time from 30 mins. To 10 mins.
• Designed and implemented the Auto air and oil spray on the tool and die that eliminated the chips and dents problem.
POSITION: Manufacturing Engineer Level II (Feb 2003 to Apr 2006)
DUTIES:
• Conduct Process Capability Analysis
• Provide Continuous process improvement
• Developed and innovate new technique/procedure to improve the product quality and to prevent defects
• Responsible for internal and external technical Disseminations
• Responsible for product development and improvement ( FAI )
• Creates/generating design for inspection jigs and fixtures, tool and die modification
• Time study and failure analysis
• Provide inspection Standards and process parameters
POSITION: Quality Engineer (Jul 2002 to Feb 2003)
DUTIES:
• Monitor and Provide Monthly Quality Reports
• Responsible for the establishment and implementation of procedures
• Responsible for the investigation, formulation and recommendation of standard solution to reoccurring quality problem that affect productivity
• Decide and use judgement on quality matters pertinent to acceptance of parts of product according the customer requirement, company quality and procedures
• Set up incoming material quality final quality assurance and surveillance process
• Set up failure analysis capability to accelerate problem root cause determination.
POSITION: Quality Technician (Jul 2000 to Jul 2002)
DUTIES:
• Responsible for Incoming, In-Process and Outgoing Inspection
• Responsible for part capability monitoring ( SPC )
• Responsible for implementation of work instruction and procedures
• CNC CMM inspection and programming
• Conduct training for inspectors on how to use measuring equipments such as: CMM, VMM and etc.
• Recommend improvement on both process and quality
SEMINARS AND TRAINING ATTENDED
• Eddy Current Inspection
• Six Sigma Problem Solving Technique ( DMAIC )
• Poke-yoke
• 8D problem Solving Techniques
• Value Analysis/Value Engineering
• Statistical Process Control
• Gage Repeatability and Reproducibility
• Internal Quality Audit
• ISO 9000 documentation awareness and training
• TS 16949 awareness/Audit training
• Failure Mode and Effect Analysis
• 7 QC tools
• Measurement Analysis Training
• Fire Fighting Technique
• CNC CMM programming
• Leadership and supervision
• Advance Product Quality Planning
• Product Production Approval Process
• Red X strategies Problem Solving
PERSONAL DATA
• Age : 33 yrs old
• Birth Date : March 12, 1979
• Birth Place : Philippines
• Sex : Male
• Citizenship : Filipino
• Weight : 65kgs
• Height : 5’6”
• Marital Status : Married
• Name of spouse : Mayen Pabiona
• Her Tel# : +639*********
EDUCATIONAL BACKGROUND
• University : University of Sunderland
• Year Graduated : July 14 2011
• Course : Bachelor Degree ( Hons ) Electrical and Electronics Engineering
• Award : 2nd Class Honour(s) First Division
• Tertiary : Marikina Institute of Science and Technology
• Year Graduated : March 1998
• Course : D.T Electronics Technology
• Award : Most proficient in Industrial Electronics
: Department of Science and Technology Scholar
• Secondary : Central Isabela Christian Academy
• Year Graduated : April 1996
• Award : High school valedictorian
: Leadership Award
• Primary : T.S.I.E.S
• Year Graduated : April 1992
• Award : Elementary Valedictorian
Contact this candidate