Production Supervisor

*** ***** ****** **.

Eastaboga, AL *****

Email:***************@***.***

Home: 256-***-****

Cell Phone: 256-***-****

Christopher R. Jacobs Jr.

Objective:

I am currently looking for a full time position with an organization that offers a greater challenge for me to use my management and supervision skills to benefit mutual growth and success.

Educational Background:

Jacksonville State University, Jacksonville, AL - Criminal Justice (2.0 GPA) August 2004 - December 2008 62 semester hours

Stillman College, Tuscaloosa, AL - Early Childhood Education (2.8 GPA) August 2003- April 2004

Anniston High School, Anniston, AL. - General Studies/Diploma (2.3 GPA) August 1999- May 2003

Experience:

Health Services Inc., Anniston, AL

Maintenance and Patient Transporter, December 2010- Current

Job Duties:

• Safely operate a gas powered vehicle within and out of county to transport an array of patients to and from various medical appointments.

• Transport infectious disease blood samples and lab specimens to area health departments.

• Communicate with verbal and nonverbal interactions with diverse individuals on a daily basis.

• Assist special needs individuals as needed.

• Work extended shifts to ensure completion of job duties as necessary.

• Ensure proper maintenance and up keeping of agency vehicles.

• Guarantee work area and buildings are sanitary by properly disposing of biohazard material, mopping, sweeping, vacuuming, dusting, and wiping down clinic areas with proper disinfectants.

Orion Technology, Anniston, AL

Production Supervisor, November 2008 - October 2010

Job Duties:

• Supervised a group of approximately 25 workers by ensuring employees were properly trained, time cards were properly documented, attendance logs maintained, ensured proper equipment issued to each individual employee such as, safety glasses, ear plugs, aprons, sleeves (as needed), insulated high temperature gloves, steel toed and steel soled rubber boots.

• Facilitated safety meetings once weekly and conducted safety stand downs as needed.

• Communicated with management regarding hazards within the work areas, faulty equipment, high priority items, as well as, inputted work and service orders.

• Disciplined employees when rules and regulations were not followed in accordance to employee handbook and site policy.

• Maintained production log for overall production daily.

• Maintained maintenance of equipment such as, high pressured steam wands, high pressured steam washer, hurricane washer, fork lift, and tow motor.

Quality and Safety Environmental Inspector, January 2008 – November 2008

Job Duties:

• Enforced strict safety guidelines as outlined in the site policy letters and employee handbook.

• Facilitated safety meetings once weekly, safety committee meetings once monthly, and safety stand downs as needed.

• Inspected finished tanks (M1A1,M1A2,M1A2JAB, M1A2 Minesweeper, M-88, M-60 Bridge Launcher, M113, M577, M-9 Ace, FAASV, Fox, Stryker FOV, & MRAPs) and parts (1790 engine block, 1790 oil pans, M1 Power Pack, V-6 CAT engine, V-8 Detroit engine block, V-8 Cummins diesel engine block, V-6 engine block and other internal parts).

• Ensured all hazardous material barrels were in compliance with Depot and ADEM material handling and disposal policies.

• Ensured all Material Safety Data Sheets were up to code per Depot guidelines.

• Opened hazardous material barrel using a chisel barrel opener by holding chisel as it was inserted into the top of the barrel while wearing proper safety equipment.

• Secured all full hazardous material barrels with a impact wrench attached with a impact socket by first placing the lid on the barrel, next hitting the lid with a rubber mallet, finally securing lid with a lock ring.

Material Handler, September 2007- January 2008

Job Duties:

• Operated a diesel and propane powered forklifts with a weight capacity of 6,000 to 12,000 lbs in all weather conditions.

• Operated a gasoline or diesel powered tow motor attached with a weight capacity of 10,000 to 23,000 lbs in all weather conditions.

• Inspected all parts prior to removal from open bays.

• Delivered parts to designated areas in shop environments, warehouses, and staging yards.

• Loaded and unloaded parts into a hurricane washer.

• Unloaded parts using hand tools such as crow bars, hammers, band cutters, and screw drivers.

• Assisted with the development of plans for storage and arrangement of stock.

• Performed preventative maintenance (changed air filters using needle nose pliers and screw drivers, secured battery terminals, changed broken fuses) checks, and services for the motor vehicles I operated.

Production/ Vehicle Cleaner, March 2007- September 2007

Job Duties:

• Performed work in opened bays in all weather conditions, on hard surfaces that required standing, bending, and stooping in awkward positions for extensive amounts of time.

• Cleaned tanks and parts using a high pressure steam wand.

• Mixed cleaning solutions and degreasers with proper amount of water which was regulated into a steam valve.

• Opened Engine containers to be steam cleaned using an impact wrench and a crane system.

• Buffed engine blocks and internal engine parts removing all rust, gaskets, and paint using various buffing tools (90 degree die grinder, drill, and straight die grinder, air ratchet with sockets to remove bolts and insert lifting braces).

• Cleaned parts using a high pressure industrial washer on a conveyer belt.

• Oiled finished parts and wrapped them in plastic to preserve for the next process.

• Removed pins from tank skirts with a sledge hammer and a heavy duty pry bar to clean the tank tracks and suspension.

• Kept a written log of all parts cleaned, quantity, and routing numbers.

Cabinet Blaster, October 2006- March 2007

Job Duties:

• Setup and operated various blast media machines including: (Walnut hull, glass bead, steel shot, soda, and sand).

• Used different blast media to remove rust, scale, paint, and other foreign substances from delicate/ non delicate metals. Used proper blast controls and appropriate abrasives and mixtures.

• Followed oral and written instructions to locate surfaces to be blasted.

• Diagnosed problems such as pressure leaks, poor cutting quality, and uneven blasts, using technical manuals and shop manuals.

• Adjusted different cutting speeds and different types of grades of abrasives with various size and shaped nozzles with appropriate amount of air pressure.

• Performed first echelon maintenance to equipment, as well as, cleaned or exchanged filters using screwdrivers and socket wrenches.

• Replaced broken gloves using a screw driver and retracting clamps.

• Replaced and tightened hoses using pipe wrenches and crescent wrenches.

• Unclogged hoses in the mixing chambers using high pressure steam wand and pipe cleaners.

Allen Mayfield Bail Bonding, LLC. , Anniston, AL

Bail Enforcement Officer & Bounty Hunter, August 2004- October 2006

Job Duties:

• Signed surety bonds at correctional offices.

• Tracked bail violators, captured bail violators, and transported bail violators to the appropriate correctional facility.

• Kept records of all clients, their weekly report, and their court dates within a secured database.

Anniston Housing Authority, Anniston, AL

General Laborer May 2004- August 2004

Job Duties:

• Operated heavy equipment (back hoe and lawn mower). To move debris and cut lawns of tenants.

• Vacated apartments

• Operated a 2 ton dump truck to pick up debris and trash set out by tenants.

• Operated tools such as shovels, scrapers, small bulldozers, and backhoes to excavate, move, and grade soils.

• Operated trucks attached with a double axel trailer that tows heavy equipment.

• Maintenance on tractors changed oil, tires, fixed flats, changed air filters, spark plugs, and fuel filters.

• Measured solutions and filled tanks that sprayed pesticides, herbicides, and paint remover.

• Completed daily vehicle trip tickets.

Mayfield Security & Investigations

Security Guard & Private Investigator, December 2003- May 2006

Job Duties:

• Performed duties as armed security officer I guarded building’s interior and exterior, car lots, and private parties. (Armed with a pistol, flash light, handcuffs, and stun gun)

• Reported missing items to law enforcement.

• I wrote reports, completed missing property forms, recorded messages, and attended briefings.

• Performed surveillance and investigated persons to obtain evidence for cases, divorces, child custody, and information about an individual’s character.

Forestlawn Memorial Gardens, Anniston, AL

General Laborer May 2003- September 2003

Job Duties:

• I assisted in burial procedures. Operated cargo tractor to carry dirt to and from grave sites. Used shovels, picks, and tampers to square and level graves, set vaults and head stones.

• Maintained rounds and roads by putting down sod, gravel, asphalt, hay, grass seeds, and fertilizers.

• Assembled head stones using screwdrivers, hammers, sockets, shovels, picks, and hand/ motorized tampers.

• Refurbished head stones markers, using a grinder, air sander, sealers, gaskets, and other tools.

• Operated lawnmower, string trimmer/ edger, blower, 2ton dump truck, and other construction tools.

Skills:

Skill Name Skill Level Last Used Experience

Computer Skills Expert Currently 10+years

Microsoft Excel Moderate Currently 5+years

Power Point Expert Currently 10+years

Hand tools Expert Currently 15+years

Word Expert Currently 10+years

Power Tools Expert Currently 10+years

Precision Machining:

While attending Anniston High School I setup operated one or more CNC conventional mill machine Lathe, grinder, drill press, and power saw, metalize equipment etc. required in fabrication and modification of part components for variety of equipment. I selected proper types and sizes of material to establish work points. Setup and operated conventional machine tools and determined which machine required attachments and used proper sequence of operation on machines; I made adjustments to machines to ensure dimensional accuracy, to use jigs and fixtures to work to close tolerances (+/-.002) as normally required by blueprint drawings to use precision instruments such as calipers, scales, depth gages, micrometers, thread gages, dial indicators, and similar measuring devices common to the trade. I ensured hazardous waste materials was handled and processed within operating guidelines, I also have the full knowledge to adjust, setup cutting speeds and feed for machinery I also determined proper coolants, lubricants, or abrasives (sanders and other hand tools) to be used. Read interpret Blueprint sketches, drawings and received oral and written instructions relating to assignments in machine operation.

Licenses:

Combat Tracked Vehicle- 10/06

Mule/Tug-10/06

Forklift- 10/06

Heart Saver AED (CPR)-06/09

Stryker (Family of Vehicle) 03/10

MRAP (FOVs) 03/10

ISO 14001 Certified 2007(Anniston Army Depot)

Awards/Honors:

Outstanding Leadership Award (Orion Technology- 2010)

Perfect Attendance Award (Orion Technology 2007, 2008, 2009)

Certificate of Appreciation 5 years of service (Orion Technology 2010)

Letter of Appreciation (Orion Technology 2009)

Contact this candidate