Project Years Experience
Resume:
*. Expertise : CAD Designer.
*. Name : MANINDRA NATH SAU
3. Date of Birth : January 11, 1980
4. Citizenship : Indian/ Passport No-G2514141-Date of Expiry 01/07/2017
5. Communication : VILL-Kanpur, P.O. - Tulsiberia, Dist. - Howrah, Pin- 711401.
********.***@*****.*** / ********@**********.***
(M) +91-872******* / +91-920*******.
6. Education : Draftsman in Mechanical Engineering (from I.T.I Govt. of West Bengal). 2002.
7. Software Knowledge : Computer training / Proficiency on MS Office, Auto CAD, AutoCAD Mechanical Desktop, Autodesk Inventor,
Auto CAD Map 3D, EPANET 2. Global Mapper, Topcon, AutoCAD Civil 3D & ArcGIS Desktop 10 (Preliminary)
8. Countries of Work Experience : India
9. Year of Experience : 10+
10. Languages & Degree of
Proficiency Language Speak Write Read
English Excellent Excellent Excellent
Bengali Excellent Excellent Excellent
Hindi Good Good Moderate
11. Employment Records:
From March’2010 TO till date
Employer : LOUIS BERGER CONSULTING PVT. LTD.
Designation : Senior CAD Designer.
Description of Duties : Has 2 years experience as CAD Designer in Project Management Consultant for Guwahati Water Supply Project in Guwahati ( JICA funded, Loan No. ID-P 201).
Working Software on : AutoCAD 2008
AutoCAD 2013
EPHANET 2
AutoCAD Map 3D
ArcGIS Desktop 10 (Preliminary)
Global Mapper
Topcon
AutoCAD Civil 3D
MS-Office
From December’08 To February, 2010
Employer : CONSULTING ENGGINEERING SERVICE (I) PVT.LTD.
Designation : Auto CAD Draftsman
Description of Duties : Has more than 1 years experience as CAD Draftsman in Design Supervision Consultant in Kolkata Environmental Improvement Project in Kolkata ( ADB funded).
Working Software on : AutoCAD 2007
Global Mapper
Topcon
MS-Office
From Novemebr’04 To December, 2008
Employer : JANDU ENGINEERING WORKS PVT.LTD.
Designation : Auto CAD Draftsman.
Description of Duties : Has 4 years experience as a CAD Draftsman in a heavy engineering Industry in Paper printing, Film printing Converting & Label printing machine, Coating-Lamination machine and Lamination machinery in Noida.
Working Software on : AutoCAD 2004
AutoCAD 2005
AutoCAD 2006
AutoCAD 2007
AutoCAD Mechanical Desktop
Autodesk Inventor
MS-Office
From August’02 To October, 2004
Employer : PREET MACHINES (P) LIMITED.
Designation : Junior Auto CAD Operator
Description of Duties : Has 2 years experience as CAD Operator in Industries plant and machineries division in manufacturing of Reduction gear boxes, Various harden and ground pinion shaft and gears, Rolling mills housing stand, Sharing machine and Steel plants for Crane in Delhi.
Working Software on : AutoCAD 2000
AutoCAD 2004
MS-Office
12. Detail Task Assign
Name of Project
Location
Year
Client
Position Held
Exact Duties
Rendered
Time Spent
Name of Project Guwahati Water Supply Project, (GWSP)
(JICA Funded, Loan No. ID-P 201)
Guwahati, Assam, India
March, 2010- till date
Guwahati Metropolitan Development Authority (GMDA)
Senior Auto CAD Designer
Responsible for develop the design/ Cad drawing of :
Intake & Water Treatment Plant- 2nos. 255 mld and 57 mld, Location at Kharghuli (South-Central Guwahati) and Majgaon (North Guwahati), Assam, India.
General arrangement
Structural details.
Jack well (Sinking Method)
Bathymetry in Brahmaputra River
Raw Water and Clear Water Pump House.
Hydraulic Diagram
Process Layout
P & I Diagram
Clear Water Transmission Main-Total distance 30 kms. Ground Level varying from 52m msl to 219m msl.
Diameter -1700mm to 150 mm MS pipe and
-150mm DI K9 Pipe.
- 600 mm MS pipe for Railway Crossing
-300mm to 150mm MS pipe for Washout.
Alignment Plan and Longitudinal section.
Valve Chamber Details
Canal Crossing and Railway Crossing details.
Pipe Jacking arrangement details.
Reservoir-6nos. Maximum Capacity 23800Sq.m. and Minimum capacity 1100 Sq.m. At Maximum Lavel 219m msl to 121m msl.
Pumping Station- 2nos. ( One Booster Pumping Station Volumn of - 28,300 m3/d, Head 33m and One Pumping Station Volumn of 864m3/d, Head 51m. At an elevation 153m msl and 120m msl respectivly.
Foot print Layout
Details Survey drawings (from Maximum area 19810sq.m to Minimum area 744 Sq.m.
General Arrangement
Structural reinforcement details
Puddle details
Inlet /outlet Piping Arrangement (Diameter 1200 mm to 200mm)
Service building Arrangement
Chlorination Arrangement
Access Road-Speed 30km/h. Length 6.5 kms. Width 3.75m (C/W-5m) single lane with layby widening,
Survey data verification.
Design of road, Retaining wall
Calculation of E/W & Quantity Analysis.
Distribution Network / Water distribution System-
Total Distribution Zones Area -75992Sq.km Length-1000kms. Grounds Label Varying from 50m msl to
219m msl
Diameter - 1000 mm to 700 MS pipe
600 mm to 100 mm DI pipe
355 mm to 110 mm HDPE pipe
Preparation of Base Map
Compatibility for EPHANET (Including Node, Link, Tank, Valve properties)
Distribution system network Drawing
Calculating of water demand per Node
Transfer of EPHANET output to CAD drawing
Preparation of appurtenances details
Valve Chamber details
Thrust block details
Present Working in- AutoCAD Civil 3D
Checking Survey raw files
Established Terrain
Proper positioning pipe alignment as per present site condition.
Profile view
Corridor
Pipe network parts
Modeling for Pre-Construction
Till Date
Kolkata Environmental Improvement Project (KEIP)
(ADB Funded)
Location
Kolkata, West Bengal, India
Year
Client December 2008 – February, 2010
Kolkata Municipal Corporation (KMC)
Position Held Auto CAD Draftsman
Exact Duties Rendered Responsible for develop the design/ Cad drawing of :
Sewerage and Canal- Total length 30kms,Bed width varing 1.0 m to 3.051m type U-Through Vertical & Side and Bed linked Trapezodinal section.
Survey data verification
Plan and Longitudinal section
Cross section in every 20m intervales.
hydraulic/ structural drawing for canal improvement
Reinforcement details.
STP-4nos of 22,40,10,20 mld capacities.
Plant Layout
General Arrangement
Hydraulic Flow Diagram
Details of Course screen chamber
Details of Facullative Aerated Lagoan(10HP surface Aerators floting type)
Stilling Chamber,F.S.C,G.C,J.Box details.
Canal Pumping Station-22 nos.(DWF+SWF-19nos.& DWF-3nos) Design capaciry-7200to1200cum/h(SWF)and 558-82 cum/h(DWF)
Preparation of general arrangement
Civil, Mechanical, Electrical and Structural details drawing
Electrical sub-station building.
Time Spent 13 months
Name of Project
Manufacturing different types of Flexo Rotary Label Press, Rotary Label Printing and Die Cutting Machine, Universal Coating and Lamination machines.
Location Noida, Uttar Pradesh, India
Year November, 2004 – December, 2008
Position Held Auto CAD Draftsman.
Exact Duties Rendered Responsible for preparation the design of different parts of
Flexo Rotary Label Press-Speed 20 to 75m/min.
Unwinding-400mm to 1000mm
Rewinding -400m
Rotary Label Printing and Die, Cutting Machine-
Cutting Speed-20-175/m
Max.Unwinding diameter-500mm
Max. Web Width-320mm
Total Power-3.5kw
Universal Coating and Lamination machines –
Colour-4 colour,6 colour & 8 colours
Speed- 0-80m/minutes
Max.Print Width-550mm
Max.Repart Pring length-1200mm
Min. Repart pring Length-240mm
Preparing B.O.M
Inspecting Raw Materials
General arrangement of machine parts
Preparing 2d drawing for Welding/Machining/Fittings purpose.
Inspecting the machining parts for assembling.
2D & 3D model and assembling drawings
Time Spent 49 months
Name of Project Manufacturing of Mill Stand, Gear boxes, and Shear machines.
Location Delhi, India
Year August, 2002 – October, 2004
Position Held Junior Auto CAD Operator
Exact Duties Rendered Responsible for preparation CAD drawings for
Mill Stand- Pre-Stressed Mill Stand & Housing Mill Stand.
Up to 50MT per hour production of ferrous and non-ferrous metal.
Gear Boxes-Reduction Gear boxes and Pinion Gear Boxes. Single, Double and multi-stage reduction gear boxes
From 150mm P.C.D to 600 mm P.C.D and 50 RPM to 1000 RPM
Speed.
Shear Machines-Flying Shear, Cold Bar, and E.O.T (Up to 100 tons capacities).
Time Spent Inspecting Raw Materials
Materials weight calculation.
General arrangement of machine parts
Preparing 2d drawing for Welding/Machining/Fittings purpose.
Inspecting the machining parts for assembling.
2D & 3D model and assembling drawings
26 months.
Contact this candidate