Plant Engineer

Shierwin R. Abaricia

REGISTERED MECHANICAL ENGINEER – Philippines

License No. 60380

Bel Mar St. Lucban, Quezon Philippines 4328 +821*********/+639********* *********@*****.***

PIPING DESIGNER/ENGINEER

Mechanical Engineer with 9+ years experience in Engineering, Design, Plant Execution and Detailing of various Oil and Gas, Chemical, Pharmaceutical, Water Treatment, Food and Beverages Plant in Philippines and Abroad.

Key Skills

• Familiarity with piping codes and standards such as JIS, ANSI, ASME, DIN.

• AUTOCAD 2000-2010, AUTOCAD P&ID 2010 and MS Office knowledgeable.

• Piping, Equipment, Structure, Pipe Support modelling using 3D design software such as EYECAD Ver 6.6, PDMS Ver. 11.6 & 12.0 & AutoCAD Plant 3D 2011.

• Microstation V8i and Open Plant

• PDMS Customization of Piping and Instruments Parts (specon & paragon)

• Ability to read and interpret P & ID and UFD.

• Familiar with Piping Specialty Items and Instrument such as Valves (manual and Pneumatic), Gauges, and Fittings

• Knowledgeable in Welding Procedures (SMAW & GTAW)

• Knowledgeable in different piping insulation and cladding for hot and cold lines.

• Familiar with plant safety standards and fire fighting.

• Familiar with different supplier of various engineering materials accredited by various plants.

Employer Summary

PIPING DESIGN ENGINEER

Daelim Industrial Corporation Ltd

Piping Department

Seoul, South Korea

August 2011-Present

PROJECTS: SADARA Rastanura Intergrated Plant

Consortium of DOW CHEMICALS and SAUDI ARAMCO

Polymeric Diphenyl-Methane Diisocynate (PMDI) Plant

Jubail Industrial City II, Saudi Arabia

August 2011-Present

Scope Of Works

• Engineering, Procurement and Construction works for PMDI Area

• FEED Verification from KBR

Duties and Responsibilities

• Plot Plan and Equipment Layout Drawing

• Safety Shower and Utility Stations Layout Drawing

• Piping Design Instruction for sub-contractors

• Piping Support Standards based from Client Specifications

• Dike Height Calculation for Flammable, Combustible Tanks

• Bulk MTO of Valves and Long Lead Items specially Phosgene and Isocyanates Lines

• Data Sheet preparation for Specialty Items such as Steam Trap and Coupon Rack

• Material Requisition, Purchase Requisition and Technical Bid Evaluation for Package Equipment and Specialty Items.

• Coordination Meeting with clients regarding various issues from FEED and Technical Documents discrepancies

• Routing Study for Different Piping

• Piping Review and Interference check using Navisworks and Smart Plant Review

• Preparing Technical Clarification regarding FEED Package Document, Saudi Arabia Standards and Global Standards from Dow Solutions and Saudi Aramco

PIPING DESIGNER

Worley Parsons Bahrain WLL

Piping Department

Manama, Bahrain

November 2010-June 2011

PROJECTS: Tatweer Petroleum Upgrade of Existing Facilities

November 2010-June 2011

Scope Of Works

• Expansion of Tank Batteries and Gas Oil Seaprators(GOSP)

• Well Manifold Upgrade

• Replacement of Various Pipeline such as Gas, Injection Water, Fuel, Condensate, Steam, Compress Air and FRP Lines.

• Rental Compressors Piping including Pig Launchers Design

• Installation of Booster and Shipping Pumps

• Maududd Header Piping

• As-builting of Tank Batteries, Gas Dehydration Unit and Well-Manifolds in the entire kingdom of Bahrain.

Duties and Responsibilities

• Assist Senior Piping Engineer in carrying out project.

• Site survey for actual verification of Routing and Tie-In points. Measuring the actual length of Pipes and Pipelines to be replaced. Identification of supports to be replaced and add.

• Planning and routing of pipes and equipment using Autocadd 2010, Microstation V8i and Open Plant (3D CAD based on applicable standards with high regards and consideration on operation and maintenance of valves and mechanical equipment.

• Preparation of Piping Isometric Drawing for fabrication and installation.

• Preparation of Piping Support for fabrication.

• Preparation of drawings/documents related to piping and equipment including general arrangement drawings, process and instrument diagrams, demolition drawings and sketches, MTO’s and Valve list.

• Documentation/Preparation of Project Standards and Design Drawings

• Bulk MTO and Tie-in Details preparation for early Shutdown.

PIPING DESIGNER

Jord International Pty Ltd.

Philippines Branch

Piping Department

July 2010 – October 2010

PROJECTS: Blaney Expansion Project

Queensland Gas Company Project

CHEMVIRON Expansion Project

July 2010 – October 2010

Duties and Responsibilities

• Planning and routing of pipes and equipments using AutoCAD Plant 3D 2011 based on clients’ standards and practices.

• Preparation and checking of Piping Isometric Drawings for fabrication.

• Preparation of Piping Support Drawings for fabrication.

• Preparation of drawings related to piping and equipments including: pipe penetration drawings, general arrangement drawings, process and instrument diagrams and other drawings and sketches.

• Documentation/Preparation of Project Standards and Design Drawings.

• Inter discipline check/clash detection using Navisworks Manage.

• Coordination between other offices outside country for updates and clients’ comments regarding the design.

MECHANICAL/PIPING DESIGNER

Hitachi Plant Technologies Ltd. Tokyo, Japan

Industrial Plant Division

Piping Department

April 2005 – May 2010

PROJECTS: ASTELLAS Toyama Ltd. CT-1 Project

September 2009-April 2010

SUMITOMO KOGYO Refinery Project

Oita Prefecture, Japan

October 2008-August 2009

EISAI Pharmaceutical Plant-P2 Project

Kashima Prefecture, Japan

October 2007-September 2008

KURARAY ENGINEERING-Engineering Plastic Plant

GKP Project

Kashima Prefecture, Japan

January 2007-September 2007

SHINTECH Vinyl Chloride Monomer Plant

Plaquemine Louisiana, USA

January 2005-December 2006

AR-ARAZI Methanol Plant

Jeddah, Saudi Arabia

August 2005-December 2005

Duties and Responsibilities

• Assist Senior Piping Designer in carrying out project.

• Planning and routing of pipes using PDMS and EYECAD Ver.6.6 based on applicable standards with high regards and consideration on operation and maintenance of valves and mechanical equipment.

• Preparation of Piping Support for fabrication.

• Preparation of drawings related to piping and equipment including: pipe penetration drawings, general arrangement drawings, process and instrument diagrams, and other drawings and sketches.

• Extract piping arrangements and isometric drawings with complete bill of materials based on PDMS or EYECAD 3D Model database.

• Resolve interference clashes using Navisworks.

• Prepares drawing, equipment, line, valve and instrument lists

• Documentation/Preparation of Project Standards and Design Drawings

• Preparation of Insulation, Paintings and Support Standards

• Preparation/Planning of drawings for Equipment Installation

Hitachi Plant Technologies Ltd.

Philippine Branch

Makati City, Philippines

Plant Mechanical Piping Section

April 2005 – May 2010

PROJECTS: K1CX and K2CXX POSCO PL/TCM (STEEL PLANT)

ISDEMIR PL/TCM (STEEL PLANT)

BRIDGESTONE

HGST Water Treatment Plant

ILOILO Domestic Airport

Duties and Responsibilities

• Design and drafting of piping drawings including plot plans, equipment layouts, support manufacturing drawings and general arrangement drawings.

• Preparation of material take-offs (BOM)

• Prepares drawing lists, equipment list, line lists, valve lists and instrument lists

• Guiding other levels of drafting personnel assigned to his/her area on a project.

• As-Built Drawings for Finished Project

• HVAC drawing preparation

PROJECT ENGINEER

FEMC International Philippines Inc.

Pasig City, Philippines

July 2002 – December 2004

PROJECTS: Beer Recovery Plant

Filtration Plant with automatic CIP under PALL SeitzSchenk

For San Miguel Corporation, Philippines

La Tondeña Distillers Inc.

Bago City, Bacolod

Waste Water Treatment Plant

Evaporative Cooling Type

Beverage Plant by MITECO (Zofingen, Switzerland)

composing of CIP for Beer & CSD, Hot Filling Line, Filtration Plant,

Sugar Dissolving, Syrup Mixing Plant, Carbonation & Water De-

aeration Unit under Beverage Packaging Specialist

PET-MPPF Plant, San Fernando, Pampanga

Wyeth Philippines

Various maintenance works like revamping of different pipes,

installation of various equipment like pumps, pallet washers and

filtering machines.

Canlubang, Laguna

Duties and Responsibilities

• Attend pre-bidding conferences

• Conduct site inspection for the proposed project.

• Prepares cost estimate and material take-off for the proposed project.

• Planning and scheduling of an on-going project

• Direct supervision and implementation of projects

• Designing of Pipe Layout

• Purchasing of engineering materials like pipes, valves, plates, pipe fittings and steel bars for pipe support.

• QA/QC and Cost Control of project

Education &Trainings

Southern Luzon State University

(formerly Southern Luzon Polytechnic College)

Lucban, Quezon

Bachelor of Science in Mechanical Engineering, 2001

Health, Safety and Environment Training

Hydrogen Sulphide Orientation

Worley Parsons Bahrain WLL

November 2010

Piping Design Management System (PDMS 12.0)

Hitachi Plant Technology Ltd.

Tokyo Japan

July 2008

Basic Nihonggo Lessons level 1 & 2

Hitachi Plant Technologies Ltd. PHIL. Office

July 2005

Enterprise Project Management (EPM)

San Miguel Head Office Complex

Mandaluyong City

October 2004

AUTOCADD with Color Rendering

Release 2002 & 2004 ( Level I & II )

Microcadd Technologies

November 2003

ISO 14000

SLPC, Lucban, Quezon

February 2001

Pulverizer Hard Surfacing & Boiler Tube Thermal Spray Technology

Lucena City

September 2000

COGENERATION & TRIGENERATION

Manila Exposition

August 1999

Contact this candidate