Project Engineer

Objective

I am looking forward to pursue my professional career in an organization where I can develop and utilize my professionalism, positive attitude, communication and leadership skills.

Experience/Internships:

From – Till Institution Designation Department

1. 20/9/11 ~ Date PrACSI (UAE) Proposal Engineer Proposals

Responsibilities:

• Conduct preliminary and technical review including scope, specification & verification on receipt of client’s inquiries.

• Technical and Commercial clarifications of the proposal as well coordination with the project team.

• Man-hour calculation for instrumentation and control projects.

• Application and Hardware design of SCADA, PLC, ESD and DCS systems.

• Formulate the system preliminary design – system sizing, component selection and system architecture.

• Propose BOM / BOQ preparation based on clients requirements.

• To offer validated materials prices and secure approved vendors’ quotations.

• Preparation and revision of project costing and estimates.

• Preparation of Technical & Commercial proposals as well as Compliance & Deviation Tables & other necessary project documentations.

• Liaison, clarification and follow up the client.

• On award of the order, attend project handover meeting with Proposals Manager.

Sectors Served: Oil and Gas

2. 01/10/10 ~ 01/09/11 U.E.C Pvt. Ltd Instrument Engineer Process Control Instrumentation

Responsibilities:

• Assist in, prepare, and coordinate designs for industrial projects.

• Selection of Temperature, Pressure, Flow, Level and Analysis Instrumentation.

• Sizing of Flow meters (Orifice Plate, Ventury Tube, Pitot tube, P.D, Vortex, Thermal, Coriolis).

• Sizing of Control & Pressure Relief Valves.

• PLC, DCS, ESD, F&G & HIPPS systems specification and selection.

• Coordination work with other disciplines.

• Support I&C team with project deliverables.

• Instrument Verification – commissioning, Installation, calibration, and operation

Sectors Served: Oil and Gas, Defense, Minerals

3. 01/09/08 ~ 30/09/10 Speedy Automation Instrument Engineer I & C Dept.

Responsibilities:

• Selection of field instruments as per process conditions and customer requirements.

• In-House Engineering, Logic/HMI development for DCS/PLC, Hardware selection, Raising BOQ, Preparation of I/O Chart.

• Providing best techno-commercial solutions to clients.

• Preparation of Design Documents for Procurements, Installation and Planning.

• Preparation of Loop diagrams, Wiring diagrams & hook ups before execution of projects.

• Review of Project P&IDs and preparation of BOQ lists accordingly.

• Cost Estimation, Budgeting & forecasting before project execution.

• Sourcing from worldwide manufacturers as per project requirement.

• Selection, supply, Installation & Commissioning of Vibration Monitoring System.

• Designing& selection of Radar & Tank Gauging systems.

• Sizing of Control Valve & Flow meters (Orifice, Pitot tube, Vortex, Magnetic, Coriolis, Rota meters etc.)

Sectors Served: Oil and Gas, Defense, Sugar

4. 1/9/2007 ~ 1/8/2008 Pakistan Meteorological Dept Internee Engineer Remote Sensing Dept.

Responsibilities:

• Final Year Project sponsored by Pakistan Meteorological Dept

Technical Skills:

• Installation, commissioning and calibration of Process Control Instruments i.e. Temperature, Pressure, Flow, Level, Analysis

• Designing, Engineering & Procurement of DCS, ESD, F&G, HIPPS & SCADA Proposals upto 40,000 I/Os, worth of Euro 10 Million independently and on Turnkey basis

• Conversant in Safety Standards i.e. ATEX, NFPA, IEC 61508, IEC 61511

• Handling of Electrical and Process Tolls i.e. DMM, Clamp Meters, Earth Ground Testers, Power Quality Analyzer, Thermal Imager, Process Calibrators, Relay Testers

• Selection and Sizing of Temperature, Pressure, Flow, Level, Orifice Plates and Control Valves based on strong theoretical and practical knowledge

• Strong Competitor knowledge of Instrumentation and Control Manufacturers

• Conversant in Logistic Terminology

• Selection, Sizing & Estimation of Control & Marshalling Panels, Junction Boxes, Isolators, Terminal Blocks, Wires & Power Calculation

Education:

From – Till Institution City Degree Subject Div

2004 – 2008 Air University Islamabad BEE Electrical 1st (67%)

2001 – 2003 Superior Science College Sargodha H.S.S.C Pre-Engineering 1st (71%)

1998 – 2000 Zia Public High School Bhalwal S.S.C Science 1st (84%)

Major Projects:

PrACSI*

U.E.C (Yokogawa Channel Partner)

Sr. #

Client

Project Title

Description

1

BYCO Pakistan Limited

DCS System I/O Count: 4000, Operator Stations: 7, Design, Techno- Commercial Proposal & Technical Procurement of DCS

System based on Centum VP.

2

Pakistan Refinery Limited

DCS System I/O Count: 500, Operator Stations: 2, Design, Techno- Commercial Proposal & Technical Procurement of DCS System based on Centum CS3000R3.

3

Fatima Fertilizer

Instrumentation Package Design, Engineering and Procurement of Packages consisting of Temperature, Pressure, Flow, Level & Analysis Instrumentation

4

Pakarab Fertilizer

Instrumentation Package Design, Engineering and Procurement of Packages consisting of Temperature, Pressure, Flow, Level & Analysis Instrumentation

5

Descon Engineering

Fertil Urea Plant U.A.E Design, Engineering and Procurement of Packages consisting of Temperature, Pressure, Flow, Level & Analysis Instrumentation

Speedy Automation (E+H Channel Partner)

Sr. #

Client

Project Title

Description

1 University of Engineering and Technology, Taxila

Industrial Automation Lab I was involved in Selection, Sizing, Techno-commercial Proposal Preparation and Training of Process Control

Instruments in University of Engineering and Technology, Taxila. The products involved were PT, FT, TL, TT and PH transmitters from E+H. The total worth of Project was USD 60,000.

2 Oil and Gas Development Co. Limited, Islamabad Coriolis Flow Meters for Custody Transfer Application I was involved in Selection, Sizing and Techno-commercial Proposal preparation of Coriolis Flow Meters for Custody Transfer at different sites of O.G.D.C.L. I lead the project and secured the business for E+H worth USD 0.4 Million.

3 Com-cept, Islamabad Coriolis Flow Meters for C.N.G I was involved in Selection, Sizing and Techno-commercial Proposal preparation of Coriolis Flow Meters for CNG Dispensers. I lead the project and secured the business for E+H worth USD 0.3 Million. It was a regular business and demand is generated as new CNG Stations are installed.

4 C.N.G Stations Calibration of CNG Flow Meters I headed a team of 5 technicians and our company went into contact with different CNG Stations for weekly calibration of CNG Flow Meters. It is a regular business and generating average revenue of 0.3 Million per month. Major players, Micro Motion and E+H are being calibrated by us.

*Details may be provided upon request.

Trainings:

Sr. No. Description Location Duration

1 Intensive Training on PCS7 based DCS System comprising of AS and OS Part Siemens, Dubai (U.A.E) 4 weeks

2 Training workshop on designing technical solutions for DCS based on ABB Freelance ABB, Abu Dhabi (U.A.E) 2 Days

3 Training workshop on designing technical solutions for ESD, F&G & HIPPS based on Hima Hi-Quad Series Hima, Dubai (U.A.E) 1 Day

4 Process Control Instrumentation Training (Temperature, Pressure, Flow, Controllers & Recorders) U.E.C, Lahore(Pakistan) 2 Weeks

5 Basic Product Training (Temperature, Pressure, Flow, Level & Analysis) Speedy Automation, Islamabad(Pakistan) 1 Week

Awards & Achievements:

• Awarded scholarship throughout the academic career from FSc to B.E

References:

References shall be provided upon request.

Contact this candidate