Technician Quality Control
Resume:
Kevin Salmeron
Cypres, TX ****9
832-***-**** ***********@*****.***
Objective
To join a successful company in a Material Coordinator, Technical, Warehouseman, Planner, or Machinist.
Education
Lone Star College 01/2011- 04/2011
Completed CAD-CAM (Computer-Aided Drafting, Computer-Aided Mfg.) classes.
Completed Basic Machine shop 1.
Completed Blueprint reading and sketch.
Working on CNC (Computer Numeric Controller) Certificate.
Employment History
Burnett Staffing/ Primary Sourcing 08/2011- current
Mechanical Assembler
Repair incoming tools such as CMS, Gammas, CDS, RTDs etc by following Weatherford procedures.
Assembled cap banks, and Gammas and put them into chasitys or housing and will inject mold into the tools and put them into the oven at 100 degrees for two.
Calibrated tools such as CDS, CDST, G4, and tensors qt different Temperatures using Navigational Calibration, and EM&PP.
Will do vibe test on BTR (Bottom Transmitter) and CDS (Directional Sensor) tools.
When done with the tools will go into the Weaherford website and update the PTRs on the tools and Excel.
Remedy/ Liftmoore 04/2011-08/2011
Assembler
Will assemble parts of crane by reading schematics.
Complete paperwork properly after assignment is completed.
Machinist
Work the drill press machine, keep up with maintenance and clean area.
Read schematics properly and read general notes for the job.
Will measure where holes needed to be drilled or tapped by using tools such as Calipers, measuring tape, and square ruler.
Verify the job when completed and fill out paper work when the job is completed.
National Oilwell Varco/ LI staffing, Houston 11/2010-4/2011
Warehouseman/ receiving department
Received incoming parts through UPS, Fedex etc with NOV programs, Glovia, Trakstar.
Placed parts in designated location with forklifts.
Randstad/ Integrated Equipment Inc. 7/2010-11/22/2010
Warehouseman
Stocked and received flanges, wellhead equipments, tubing head, spools, etc.
Loaded and unloaded trucks and containers.
Pressure tested body valves, B.O.Ps and P.Ds
Received all stainless steel pipe material (includes physical receiving and verification of packing list)
Pulled orders.
Assisted with loading and receiving of pipe in pipe yard.
Suntrac Services Contractor, Baytown, TX 3/2010– 4/2010
Radiation Safety Consultant
Barricaded, monitored, and kept employees from walking into areas where radiography is being shot.
Contractors called for my assistance so that I could check if equipment was contaminated with Norm using a Ludlum survey meter.
Performed wipe test for all equipment that was surveyed and sent it back to the lab for company records.
Checked for Radiographers paperwork, equipment, and permits in order for them to shoot Radiation at the equipment they were issued to shoot at.
Halliburton Energy Services, Houston, TX 3/2009 – 12/2009
Material Coordinator / Technician / Planner
Material Coordinator
Managed and received materials, PCB boards (printed circuit boards), and tools for repair in the Repair Department.
Created work orders for our technicians and vendors.
Issued RMAs (Request Material Authorization) for parts that needed to come in for repair, and also tracked the parts.
Shipped materials or tools back to locations, using AMI numbers for tools.
Received tools and materials that needed checked for damages, along with paperwork that needed to be verified.
Provided tools to Test Well in order to verify that the tool was in good condition. If the tool failed the check, I would diagnose the issue and handle repairs.
Technician
Repaired PCB boards that came in for repair.
Identified the damage of the board and replaced the damaged pieces via soldering.
Tested and shipped repaired PCB boards.
Planner
Created work orders for incoming wire line, down hole tools that were in need of repairs.
Will issue Tools with work order to the technician so they would start the repair on the tools.
Ordered parts from the warehouse for technicians working on tools.
Closed work orders and finalized processes after tools had been repaired and tested.
Halliburton Energy Services, Houston, TX 3/2008 – 2/2009
Technician Assembler
Inspected incoming panels, cables and monitors for damages and proper paperwork, also verify serial numbers, and equipment number with the paper work.
Assembled logiq-system racks, by reading schematics and assembling and running cables and panels to make contact, afterwards will run a test.
Quality Control Tested panels and monitors by running test on the panels when received and confirm proper working conditions.
Read schematics in order to assemble logiq-system racks that held panels.
Ran cables from one panel to another or where necessary in order to send signals or power tools in rigs in the oilfields.
Loaded racks into logging trucks logiq, assembled ran cables and wires to the main power of the truck.
Tested wireline logging trucks logiq after assembly to ensure that cabling, wiring, and reading on panels were correct.
Performed troubleshooting or repaired PCB boards inside panels when necessary.
Halliburton Energy Services, Houston, TX 9/2007 – 3/2008
Warehouseman
Responsible for receiving, shipping, stocking, and warehousing of oil equipment.
In charge of all incoming tools, material, and equipment that arrived to the North Belt facility receiving dock.
Made sure everything that was received that day would be put to stock and confirmed the same day.
National Employment, Houston, TX 3/2006 – 9/2007
Associate Warehouseman
Responsible for receiving, shipping, stocking, and warehousing of oil equipment. Also filing paper work, bill of lading, and proper paper work that came in with the parts or tools to the North Belt facility.
Matco Norca 2004-2006
Warehouseman / Stocking and Receiving Associate
Unloaded containers of trucks that carry pallets stacked with boxes of different size plumbing pipes.
Separated pipes by size and put them into stock.
Organized and reviewed paperwork to ensure that quantity and shipment was correct.
Filed paperwork such as bill of lading, proper paper work that came in with material for future reference.
Located parts for orders requested for hot shot drivers.
Other Experience
Bilingual, Fluent in Spanish, and currently learning Portuguese.
loading docks, receiving, stocking, and shipping.
Obtained detailed knowledge of receiving, shipping and warehousing.
Familiar with oil rig tools, managing materials, technician assembly, and use of precision measuring instruments.
Knowledgeable in blueprint and schematic reading, interpretation, and development.
Skilled in assembling panels and oil rig trucks.
3 years experience in SAP.
Started and closed operations familiar with the SAP system used by
Halliburton, Excel, and Outlook.
Safety experience in 5S (Sorting, Straightening or setting in order, Sweeping or Shining, Standardizing, Sustaining, Safety).
Fork lift license to operate a fork lift.
Knowledge in blueprint and schematic reading, interpretation, and development.
Detailed knowledge of receiving, shipping and warehousing functions of computer components, and downhole materials including all related SAP functions.
Hazmat training and lithium battery training through Halliburton.
OSHA star site with safety.
Hand soldering, in touch up & rework of Wire Interconnection assemblies using SN 63 and HMP solder alloy.
Soldering certified by IPC, Mil Spec Works.
Reference
References are available on request.
Contact this candidate