Cnc Machinist Machine
Resume:
Joseph Brown
Rancho Cordova Ca 95670
********.*@*****.***
Objective:
Cnc Programmer Set Up Machinist,
Horizontal and Vertical Mills
Skills: Cnc Mill Machinist , Conventional , Mill , Vertical Horizontal Drill Press Operator Do Set Up On Cnc Edit Program Check Parts Quality Control Inspection Read Blue Print Do Lay Out Q.C Inspection First Article, In Process Inspection, Type Of Cnc Controller That I Have Operated Is , Ge, Fadal, Fanuc, Mitsubishi Controls 10vc. Control Cincinnati Milacron to 16vc Control Also Program Master Cam V9 Use Composite Surfacing With Wire Set upon Conventional Machine Use All Types Of Inspection Tools, 3d 2d Editing For Cnc Mills, In Process Inspection for First Article to Start Machining, Manual Drafting, Auto Cad Drafting 2005
Tool Design Technology Manufacturing, Technical Math Trigonometry and Geometry.
Experience: Technology tools
No phone calls Contact thru mail
P.O Box 813 Rancho Cordova Ca. 95670
24059 Sun Center Dr, suite # G Rancho Cordova CA.
CNC Machinist Programmer
Program with master cam v9
Set up vertical mill CNC
Daily Machine maintenance
Check quality of parts, inspection, and first article
Advance machining process multi chaining
Starting Date 2-2008 to 5-2011 out of business
Supervisor / owner Bill Baker
1 Express Staffing Phone 916-***-****
3640 Northgate Blvd # 185 Sacramento Ca.
Machine Operator
active availability on call to assignment.
Date April 2009 – Present Active on Call
Men power Phone 916-***-****
1800 Howe Ave Sacramento, Ca 95848
Machine Maintenance Machine Setter Machine Mover
2-10-2009 on Call at This Time
Burlew Engineering Phone 916-***-****
3569 Recycle Rd. Rancho Cordova.
Cnc Machinist Set Up Cnc Milling Center Run Production
Do Quality Checks on Machined Parts as I Ran Cnc Milling Center
Daily Machine Maintenance 8-2004 to 9-2008
Military Aircraft Parts
2551 Sun Center Dr Rancho Cordova Ca. 95670
Cnc Machinist Set Up Cnc Milling Center Q.C Inspection
In Process Run Production on Cnc Milling Center
Daily Machine Maintenance Check Oil Machine Warm Up
4-2001 to 1-2008
Hybrid Corp.
2549 Sun Center Dr. Rancho Cordova Ca. 95670
Cnc Mill Set Up Programmer
Set Up Run Production on Cnc Milling Center Edit Program
Inspection for First Article
11-2002 to 3-2006
Mid Town Employment Phone 916-***-****
2600 J St Sacramento Ca 95814
Cnc machinist
12-1998 Open Temp Work To 2002
Wards Logistic
225000 Harbor Blvd, West Sacramento. Ca Fork Lift Driver
Load and Unload Trucks Type Set Down and Cherry Picker
02-90 to 11-98
Composite Structure Inc. Phone 626-***-**** Ex.3213
801 Royal Oaks Dr. Monrovia Ca.
Cnc Machinist
Set Up On Cnc Milling Center Run Production Check Quality of Part Use All Types of Inspection Equipment 4 -1986 to2- 1987
Jenson Kelly Corp.
2200 Proctor, Blvd. City of Industry. Ca
Cnc Set up Machinist
Set Up On Cnc Milling Center 10 V.C Control Cincinnati Milacron
Horizontal Run Production Inspection of Parts
Education: 3-1983 to 4-1986
Rockford Aerospace Corp.
17300 Red Hill Blvd Irvine Ca.
Mill and Press Op 4700!
Run Production on Mill and Hot Press Set Up Sand Blaster
2-12-1980 to 3-1983
City College. 3835 Freeport Boulevard Sacramento Ca
Cam cad technology from 1-15-2011 spring semester
A American River College 4700 college Oak Drive Sacramento ca
Cad design 9 -11-2006 to 5-21-2007
Mt. San Antonio College 2300 Grand Ave Walnut, Ca 9-2002 to 9-2004
Drafting Technology, Master Cam, Cad Cam, Machine Tool Technology
In Home Study Course Master Cam on Line 2007 To 2009
G&M Machine Training 1141 W 9th St. Upland Ca
Machine Tool Technology Drafting Technology Cad System
Auto Cad, Operation of Vertical and Horizontal Mill Lathe Drill Press
Math Trigonometry Geometry (Certificate) From 1-1981 to 1-1982
Sacramento R.O.P Program
Fork Lift Operation Certificate 6-2002 to 1-2003
Have My Own Machinist Tools Do Set Up On Conventional Mills And Conc. Mills Also Read Print Run Master Cam V9. Cad Cam System Program
Use Inspection Equipment Anis 14.5 Use All Types Of Gages, Also Use Comparator For Inspection, Shop Math Geometry Trigonometry.
References: By request : also I can list a master cam program if needed for interview or bring thumb drive with programs on it I am currently working on advance 5 axis programming for master cam
Programs by hand:
These programs are by hand, one program is for 3 parts that has 3 vises set up to run 3 parts at a time each part has 3 hole drilled, the program is for showing how to program work off sets for each vise, to run the same part, to cut down on time, by opening the door to change, just for one part at a time. Each time a part is take off and put on, is time, it may take 5 to 10 minuets to make the change the time it takes to change one part can add up, that 5 to 10 minutes, could be used for running time, just
By add 2 parts or 2 vises to the program if you ran 8 parts a day, but can run to parts at a time,8 times 10 minutes is 80 minutes of time that could be used as production time , this set up makes it possible to run parts continuous, with out stopping I used a simple program just to show you some programming skills, this may not be the case and all programs but ware its can be used then by adding more parts to decrease part change over time ,the second part is for thread milling and I have wrote a common vise set up. The vise set up is to show you that I can do set up for CNC milling center .Setting up a vise, and putting it into words , to show how to set up using vises also, I can write programs using master cam, v9 Complex three dimensional parts and 4 axis programming
This program is for drilling three holes for three parts at one time G54 G56 G58, 3vise location, set up on mill, this program use
Subprograms to cut down on program space are long program
This to show some of my skills as a programmer done by hand
%
O3500
N10 G0 G17 G40 G80
N20 G90 G54 G00 X1.4 Y0.8 S900 M03
N30 G43 Z1.0 H01 M08
N40 G99 G81 R0.1 Z-.163 F3.0
N50 P2500
N60 P2510
N70 G90 G56 G00 X1.4 Y.08 S900 M03
N80 G43 Z1.0 H11 M08
N90 G99 G81 R0.1 Z-.163 F3.0
N100 P2500
N110 P2510
N120 G90 G58 G00 X1.4 Y.08 S900 M03
N130 G43 Z1.0 H21 M08
N140 P2500
N150 P2510
N160 T2 M6
N170 G90 G54 G00 X1.4 Y0.8 S900 M03
N180 G43 Z1.0 H02 M08
N190 G99 G81 R0.1 Z-.163 F3.0
N200 P2500
N210 P2510
N220 G90 G56 G00 X1.4 Y0.8 S900 M03
N230 G43 Z1.0 H12 M08
N240 G99 G81 R0.1 Z-.163 F3.0
N250 P2500
N260 P2510
N270 G90 G58 G00 X1.4 Y0.8 S900 M03
N280 G43 Z1.0 H22 M08
N290 G99 G81 R0.1 Z-.163 F3.0
N300 P2500
N310 P2510
N320 T1M6
N330 M30
These are the subprograms that will be used to make the program
To drill three holes subprogram # O2500 and O2510
SUB PROGRAM
O2500
X3. Y2.
X4.4 Y1.6
X5.2 Y2.4
M99
%
SUB PROGRAM
O2510
G0G40 G80 M09
G28 Z.1M05
G28Z1.00
M99
%
This is a program to do inside threads
Helical thread milling using a sub program for one hole this program is to show the using of sub programming and how to save money on large taps that cost a lot of money I am using a hypothetical pinch diameter and thread depth on this program
{Not a true thread}
% O4502
N1 G20
N2 G17 G40 G80
N3 T1 M6
N4 G90 G54 G00 X0 Y0 S 700 M03
N5 G43 Z1.0 H01 M08
N6 GO1 Z0 .05 F50.0
N7 G41 X0 D01 F15.0
N8 M98 P4500
N9 G90 GO1 G40 X0
N10 P4610
N11 X.385
N12 P4510
N13 G90 G01 G40 X0
N14 P4610
N15 X.395
N16 P4520
N17 G90 G01 G40 X0
N18 P4610
N19 X.405
N20 P4530
N21 G90 G01 G40 X0
N22 P4610
N23 X.415
N24 P4540
N25 G90 G01 G40 X0
N26 G0 Z1.00 M09
N27 G80 MO5
N28 X5. Y-5 G40
N29 G28 Z 2.00
N30 M30
%
Thread milling for one hole
Each subprogram open the thread diameter for a better finish and fit are class of fit subprogram number to be used O4500 and O4510 and O4520 and O4530 and O4540 and O4610
O4500 (SUB)
G90 G03 I-375 Z-.050 G43H01
I-375 Z-.100
I-375 Z-.150
I-375 Z-.200
I-375 Z-.250
I-375 Z-.300
M99
%
O4510
G90 G03 I-385Z-.050 G43H01
I-385 Z-.100
I-385 Z-.150
I-385 Z-.200
I-385 Z-.250
I-385 Z-.300
M99
%
O4520
G0 G03 I-395 Z-.050 G43H01
I-395 Z-.100
I-395 Z-.150
I-395 Z-.200
I-395 Z-.250
I-395 Z-.300
M99
%
O4530
G90 G03 I-.415 Z-.050 G43H01
I-.405 Z-.100
I-.405 Z-.150
I-.405 Z-.200
I-.405 Z-.250 I-
I-.405 Z-.300
M99
%
O4540
G90 G03 I-.415 Z-.050 G43H01
I-.415 Z-.100
I-.415 Z-.150
I-.415 Z-.200
I-.415 Z-.250
I-.415 Z-.300
M99
%
O4610 (SUB)
GOG90X0
G40 Z.1
G43
H01
G01 Z.05 G41 D01
M99
%
This is a vise set up. Put into words to show that I can do my own set up on vertical milling center using a Fanuc controllers
Put in new program or send it from DNC. clear out old work off sets and tool off set and D words and L words
2, Indicate in vise to zero
3, Machine soft jaws
4, Put in stop for location pin type are clamp type of stop or what ever needed to make the stop, a stop that will work as a repeatable stop each time the part is reloaded.
5 Set Work off set are fixture off set, G54, G56, G58, Etc.
Set tool length offset and diameter words h and d words
Run proof part
6 make a part inspection list from blue print
7 Check part adjust part
8 Do part inspection
9 Get first article
10 Then run production
Thank you for taking the time to look at the package that I put together
To show some of my programming skills that I have and set up experience
That I have, I hope that we can set up a interview for possible employment
At your company,
I am from the bay aria and I am willing to relocate to the bay aria for employment
At your company
Email me at: ********.*@*****.***
Respectfully yours.
Mr. Joseph Brown
Contact this candidate