CAD Designer

Krystal E. Perryman *******.********@*****.***

**** ******* ***** ********, **** 43229

(Cell) 313-***-**** (HM) 614-***-****

Objective: To secure a rewarding position, in which my talents, training and experience are utilized effectively, may lead to career advancement and personal fulfillment.

EXPERIENCE

05/2008 – 05/2009 HI-Stat Manufacturing Mansfield, OH

CAD Designer: C3PNG/Catia V5/TeamCenter/S.D.R.C. IDEAS/Data Coordinator

• S.D.R.C. IDEAS/ Catia V5 Modeling, Assembly and Drafting

• Electrical Parts/Solenoids, Sensors, Switches, Connectors, Wire Harness Assembly design & routing

• Modify 3D models, create and update 2 D prints

• Drafting, Layout/Formatting Detailing, Dimensioning, Cut Sections, Create Auxiliary views ,

• Create Assemblies Isometric view/ Layouts 2D prints assembly

• Data Coordinator, Data Exchange, Trubiquit/Autoweb, ftp, jt, dxf, iges, step, pdf, jpeg, pkg,

• Data Migrations: Converted S.D.R.C. Cad data to Catia V5 Cad data

• Utilizing basic Unix commands, PRI’s Installation, Software Updates

• Customer negotiations: work request, milestones, deliverable dates, etc.

• PC Skills: Microsoft Applications, Word, Access, Excel, PowerPoint

04/2006 – 12/2007 Easi/Inprax Engineering Redford, MI

Contracted to Troy Design Manufacturing

Project Engineer: C3PNG Development /Information Technologies

• Unix administration: utilizing basic Unix commands

• Run scripts in UNIX to export IMI2Batch data to TeamCenter

• C3P Stamping Data and C3P Fixture Data

• Data Migrations: translate and Investigate export Failure/Errors

• Customer negotiations: work request, milestones, deliverable dates, etc.

• Data Entry: Input, validate data state and status

• PC Skills: Microsoft Applications, Word, Access, Excel, PowerPoint

07/2003 – 04/2006 Easi/Inprax Engineering Dearborn, MI

Contracted to Ford Motor Company

CAD Designer: TCe Coordinator /PIM Coordinator/ SDRC /C3PNG/ Catia V5

• S.D.R.C IDEAS Programs

• SMP Updates: Modify 3D models of body closures components: front side doors, rear side doors, rear deck Lid, truck back doors, Tailgate and Liftgate.

• Create 2 D Drafting, Layout/Formatting Detailing, Dimensioning, Cut Sections, Create Auxiliary views , Isometric view of assemblies

• Create Assemblies, utilized Metaphase and WERS to Lifecycle CAD Release Packages

• Grantor of C3P PIM Access Request: S.D.R.C. Programs, TDM's, CPSC Codes and Metaphase

• LD_ Ship Files: load proper TDM's with updated locator Data when notified by Team Center Enterprise

• Send and receive WIP Data, Autoweb-FDX (ford data exchange)

• Investigate passport I.D and error's to Store MP's, parts and assemblies in Metaphase

• Unix functions run TDM Reports/TDM clean ups when notified 84% - 95 % full

• Catia V5 Programs.

• Create CAD Product Structure, CATProducts. CATParts.

• Change Ownership, check in/out parts and create assemblies in Tce. Create Item/Folders, Data Sets, and Variants

• Start Parts. Move guidance sections from VPM to Tce.

• Import (scan) EMM surface CATParts for Engineering Feasibility Studies.

• Utilize AV BOM Lite, Navigator, PSE, Frozen/Published data.

• Round Robin: Start Parts and Structures

09/2002 – 05/2003 Bartech Group Dearborn, MI

Contracted to Ford Motor Company

CAD Designer: Electrical / Electronic Systems

• Responsible for tracking electronic drawing, subsystems components on UP131 / U137 Super duty VL.

• Converted EDGS & PDGS drawings to S.D.R.C. IDEAS

• Modify 3D models, Drafting Create 2 D Formats-Layout, Detailing, Dimensioning, Create Auxiliary and Section views

• WIP, Import/Export/ email data.

• Tessellate 3D data Via (Vis Plus) utilizing Digital Buck for Packaging and clearance checks

• Created 3D brackets, switches per engineer sketches.

• Craftsmanship Studies of Switches to Surface.

• Create Master Packages and Master Assemblies

• WERS / Metaphase alignment.

11/1999 - 09/2002 Kelp Corporation Redford, MI

Contracted to Detroit Diesel Corporation, New Business Development Team.

Duties Performed from production release through Vehicle launch

SDRC IDEAS Designer/ Assembly / Detailing/ Data Coordinator / WERS/Digital Buck

• Create Master Assemblies of Power train and Diesel Engine Components

• Converted external Catia 4 Diesel Engine data/components to S.D.R.C. create assembly of external Engine components in S.D.R.C. Revise parts

• Create 2D formats of Power train and Diesel Engine Parts.

• Drafting Create 2 D Formats-Layout, Detailing, Dimensioning, Create Auxiliary and Section views

• Create 3D models of Gaskets and Hoses.

• Data Coordinator: send/receive/WIP/rename/renumber data.

• FTPPAH, email, zip and tar/untar files, Import/Export data through Catia, iges and PDGS. To Cento Italy

• Tessellate parts/assemblies to Vis Mock-up digital buck for clearance and positioning of engine to transmission and vehicle.

• WERS (worldwide Engineering Release System) raise alerts, concerns, create notices/notice supplements. Light SDRC systems administrations.

04/1997 - 11/1999 Engineering Technology Dearborn, MI

CAD Designer: SDRC IDEAS & PDGS

Contracted to the Budd Company Product Development Center

• Body system/Front end/underbody components.

• Detailing, 2D Formats/Layout, Create Section Views, Auxiliary Views, Isometric view of assemblies

• Modify CAD master models and assemblies.

• Create wire frame geometry, cut sections, and create surfaces.

• Sheet metal, Underbody components floor pan, frame, crossmembers, side rails and Reinforcements

• Body structure components, pillars and fenders

Previous CAD Design positions/experience removed to scale down resume (1996-1990)

EDUCATION

Batavia School of Automotive Design/Manual Vehicle Design Curriculum

Henry Ford Community College/CAD Vehicle Design Curriculum

Currently Attending

Columbus State Community College

REFERENCES

Kristen Melnick Ford Motor Co (********@****.***) 313-***-****

Ron Reed TDM/ Ford Supervisor (*******@****.***) 313-***-****

Carl Richardson Ford Supervisor (********@****.***) 313-***-**** or 313-***-****

Contact this candidate