DAS Engineer
Resume:
SATISH JADAV
I-**, NAVGRAH CO-OP SOCIETY,
FLAT N0:203,2nd FLOOR,
POONAM SAGAR COMPLEX
MIRAROAD (E),
Mumbai-401107.
Email:*************@*****.***
Objective Seeking a challenging environment that encourage continuous learning and creativity, provides exposure to new ideas, and stimulates personal and professional growth.
Professional experience Total Experience: 9years. Of rich exp. In GSM 2G / UMTS /CDMA 2000 / (RF Indoor Planning & Optimization 800/900 /1800/2100Mhz TRI band/ Dual band)
Indoor Planning and Optimization & Physical Optimization of field experience of 9 years of combined experience in, network, implementation, and Network optimization phases with special emphasis on Project Plan development, Resource planning, cost and budget control quality control, time management and project reporting. Expertise in 2G/3G Drive test and Post processing in NOKIA/Ericsson/Motorola Equipments.
Intermediate in using RF planning tools like), Asset 5.0, Tems, and Post processing & Optimization drive tools, Tems Investigation 9.3, , MapInfo, Actix GSM Analysis, Agilent, Nect Act, IBWave 4.4
Jan2011 –Present
Drive test Lead-Zephyr Systems-Mumbai
Physical Optimization of the Sites.
VSWR Measurements& Azimuth Calculation & Power Measurement
Drive Test Performed for Call Origination, Call Termination, Handoff Test& Markov Test, Functionality Test.
Watching system capacity indictors and coordinating with optimization team for optimizing adjustable parameters to achieve.
.
Reducing dropped calls, access failures, and trouble spots.
Examining parameters, neighbour lists, and cell configuration to ensure that blatant errors are eliminated and normal operation is achieved as verified in drive tests.
Monitoring daily Stastics of the KPI, identifying worst cells ,suggesting recommendation for the improvement of the KPI.
, Adjacencies, non-performing cells and sites with coverage discrepancies (e.g. swapped antenna cable.
Check and verify all incoming conceptual drawings based from the initial joint survey conducted, as necessary.
Verify all surveyed and hunted sites using the A955 Planning Tool provided by Alcatel to check if the intended coverage for the specified area is adequate and recommends the best site for the network.
Coordinates with the site acquisition group regarding possible site location.
Resolving Customer Complaints received thought Remedy System of Customer Care.
Preparing Weekly and Monthly Reports, Maintaining Database Documentation for Customer Complaint.
Responsible for Planning and Installation of Repeater Solution for VVIP Customers .
Feb 2006 –Dec2010
RF Optimization Lead Engineer: Qatar Telecom Ltd (MiddleEas)
Dept: Indoor Planning and Optimization
Preparing the nominal cell plan for the building.
Conducting initial RF survey of the building from design point of view.
Preparing RF design/technical proposal for In-building Solutions.
Preparing RF BOQ for the site designed.
Preparing DAS (Distributed Antenna System) Solution for In building Coverage .
Calculating the Link Budget/EIRP table and designing of the schematic diagram for IBC solutions and deciding the cable routing.
Designing the Schematic Diagram and deciding the cable routing.
Preparing the RF Technical Proposal.
Preparing the RF BOQ.
Meetings with Vendor Team to discuss the technical aspects for implementation of the design according to the requirements that they need to be fulfilled.
Checking existing coverage using TEMS Investigation GSM.
Preparing RF design/technical proposal for In-building Solutions
Analyzing the post installation coverage, spillage, and Handover tests using TEMS Investigation Light.
Optimization of the design, by implementing necessary changes in design to meet the KPIs..
Managed the regional Site Acquisition teams, Civil and Implementation teams for sites.
Managed Site Audits.
Managing the Regional O&M Team..
Team Management.
Providing technical support to teams.
Oct-2004 to Feb 2006:
Global Telecom Ltd: Mumbai (India).
IBS Planning and Design -Engineer.
Preparing the nominal cell plan for the building.
Conducting initial RF survey of the building from design point of view.
Preparing RF design/technical proposal for In-building Solutions.
Preparing RF BOQ for the site designed.
Preparing DAS (Distributed Antenna System) Solution for In building Coverage.
Calculating the Link Budget/EIRP table and designing of the schematic
diagram for IBC solutions and deciding the cable routing.
Designing the Schematic Diagram and deciding the cable routing.
Preparing the RF Technical Proposal.
Preparing the RF BOQ.
Meetings with Vendor Team to discuss the technical aspects for implementation of the design according to the requirements that they need to be fulfilled.
Checking existing coverage using TEMS Investigation GSM.
Preparing RF design/technical proposal for In-building Solutions
Analyzing the post installation coverage, spillage, and Handover tests using TEMS Investigation Light.
Optimization of the design, by implementing necessary changes in design to meet the KPIs..
Managed the regional Site Acquisition teams, Civil and Implementation teams for sites.
Managed Site Audits.
Managing the Regional O&M Team..
Team Management.
Managing the Regional O&M Team..
Team Management.
Providing technical support to teams.
Overseas Project: 1Worked on an International Project as a Optimization Engineer for Motorola in Bangladesh,
2 Done also Technical Site Survey for Siemens for Microwave Transmission in Bangladesh, also done RF Survey for Motorola in Bangladesh
3. Worked for Alcatel in Doha (Qatar) as Drive Test Engineer for outdoor as well as Indoor Sites, Also involved in the Planning of Indoor Sites for Alcatel.
4.Also done IBS Planning, Survey for Motorola in Dubai, Sharjah and Abu Dhabi for I GTL
5. Worked as the Core Team Member in Optimization Team of Leading Operator in Srilanka (Dialog) Through Erricson, Responsible for Physical, and Hardware as well as Optimization in the network, Nawras (Oman).
May2003 to Oct 2004:
Reliance Infocomm Ltd: Mumbai (India).
IBS Engineer. Lucent Technologies-Client)(CDMA2000)
Preliminary surveys of the identified buildings using an engineering handset and opting for the appropriate solution i.e. .RF repeater, optical repeater or a micro cell.
Design Survey of the building which includes putting up distribution antenna systems (DAS) i.e. fixing up the positions of yagi antenna,omni directional and patch panel antennas as per requirement.
Implementation of the system as per design survey.
Preparing the nominal cell plan for the building.
Conducting initial RF survey of the building from design point of view.
Preparing RF design/technical proposal for In-building Solutions.
Preparing RF BOQ for the site designed.
Preparing DAS (Distributed Antenna System) Solution for In building Coverage.
Calculating the Link Budget/EIRP table and designing of the schematic
Diagram for IBC solutions and deciding the cable routing.
Designing the Schematic Diagram and deciding the cable routing.
Preparing the RF Technical Proposal.
Preparing the RF BOQ.
Meetings with Vendor Team to discuss the technical aspects for implementation of . the design according to the requirements that they need to be fulfilled
Checking existing coverage using TEMS Investigation GSM.
Preparing RF design/technical proposal for In-building Solutions
Analyzing the post installation coverage, spillage, and Handover tests using TEMS
Investigation Light.
Optimization of the design, by implementing necessary changes in design to meet
the KPIs.
Managed the regional Site Acquisition teams, Civil and Implementation teams for
Sites.
Managed Site Audits.
Managing the Regional O&M Team..
Team Management.
Managing the Regional O&M Team..
Team Management.
Providing technical support to teams.
Sept2000– May 2003
Indoor Implementation Engineer Microqual Techno Pvt Ltd.
Ibs survey.
Antenna planning.
Implementation of the the planned sites as per the design
Walk test for In-building sites
Drive test using Pen Tablet investigation tool
Check the load bearing capacity of foundation, ducting, cable routing as per the design requirement
To plan for Cable Routing of the design sites and to get the work done from the contractor as per the design, Check for any damage of the cable after the completion of the work.
VSWR Measurements& Azimuth Calculation & Power Measurement
Drive Test Performed for Call Origination, Call Termination, Handoff Test& Markov Test, Functionality Test
Designing of Losses, Link Budget etc.
Carrying out site maintenance checks.
Providing support and assistance to customers.
Installation and configuration of NMS for the network.
Loading and swapping traffic
Project handled: Done Projects for In Building Solutions for Airtel, BPL, Orange,
BSNL, and MTNL, Tata Indicom etc.Outdoor and Indoor drive test on Agilent
E6474A (NITRO).CAIT Lucent Drive test tool.
Tools Handled
GIS Tools:
• MapInfo
• Google Earth
• Street and Trips
Planning Tools:
Asset
• IBWave Ver.(4.4) Indoor planning Tool
Drive test Tools
• Tems Investigation-6.1, 8.1, 9.1
• Radient(Tools Propriety to Motorola(Bangladesh)
• Agilent E6474A
• A954WD(Alcatel)
Post processing Tool
• Actix
• A954P(Alcatel)
• Ran opt (Aircom)
Performance Monitoring
• A9156
• Net act
• Mars
Training
Training given on 1xEVDO at GTL Mumbai, India.
Training given on CDMA Basics and drive test using CAIT by Eric Guzman (Senior RF Engineer- Lucent) at Reliance Infocomm Ltd. Mumbai, India.
Training Given by Alcatel Qatar for Optimization (A9156).
Training Given by Motorola (Bangladesh) for RF Planning as well as optimization.
Training given on Planet EV in GTL Ltd.
Tems 6.1 Data and Route Analysis (QATAR TELECOM)
Attended Training for SYS 2(Motorola) in Qatar telecom Ltd
UMTS Core Network Training in Qatar Telecom Ltd.
BSS Overview Training for Nokia Siemens in Qatar
Ran opt and Advantage Training from Aircom in Qatar.
Achievements Responsible for the optimization for North Part (Alcatel) of Doha Area which Includes prime area like Corniche and Emir (The King Route), also Playing Key Role in the optimization of Forthcoming Asian Games Venue to be held in December 2006.
Awards: Received Appreciation award for participating in Asian Games.
Received Appreciation Award for Installing Repeater Solution for H.H Emir Palace.
Qualification
Bachelor of Engineering –Mumbai University
DIPLOMA:
Bhausaheb Vartak College- Mumbai
Computer Fundamentals
Microsoft office: Excel (Expertise) , Word , Powerpoint
OPERATING SYSTEMS : Windows 2000 Professional
PACKAGES: Office 97, 2000, 2003 & 2007.
I hereby declare that all the particulars mentioned above are true to the best of my knowledge and information.
Satish Jadav
Contact this candidate