Mechanical Engineer

Uyamadu, Tochukwu Emmanuel N.

#* **** ****** (off Eligbolo Road) Rumuodumaya, Rumuokoro-Port Harcourt, Rivers State, Nigeria.

Cell: +234-803-***-****

+234-805-***-****

********.*******@***.***, *************@*****.***, *************@*******.***

QUALIFICATIONS

Accomplished Mechanical/Maintenance Engineer with significant experience in the Oil & Gas, servicing,

Production/Manufacturing and Allied Industry in (Mechanical/Maintenance, Steel fabrication/Construction, Piping, Corrosion, QA/AC, Projects, and QHSE.) Background includes create & developing new processes to suit a given demand, meeting all required target(s), develop projects in line with the trend of today’s technology, and project development/management. Proven leadership capabilities, perform duties as designed/assigned in any given establishment as much required. Meeting all goals & targets, as well as observing/maintaining all standards & principles associated with such project(s). Participating in mobilization and demobilization of crews & prospects in conformity with laid down advanced logistics standards and procedures (ALSP). Skilled in staff supervision, cost control, negotiations, and technical evaluations. Managing/supervising projects, activities & programs as well as crews. Providing expertise advice to management and all, on complicated job related challenges, logistics & planning plus QHSE-MS issues. Management with a progressive team oriented Organization. Fluent in English.

¬¬¬PROFESSIONAL EXPERIENCE

Job Experience

7th July 08 – Present: S/L Mech. Air Gun / Seismic Source.

Employer: Reservoir Exploration Technology (ASA) RXT, Lysaker Torg 5 A, PO.BOX

104 N-1325 Lysaker, Oslo, Norway.

E-mail: *********@***.***, Web: www.rxt.com.

31st May 07 – 6th July 08: Mech. Air Gun / Seismic Sources.

Employer: Delta Plus Nig. Ltd, 202 Olu Obasanjo Road Admiralty

House, Port Harcourt, Rivers State. Web: www.deltaplusco.com.

Delta Plus/Reservoir Exploration Technology (RXT) Crew II. (Joint Venture) Off shore Seismic OBC.

Client: Total Nigeria Limited.

Project: Total Ofon 4D OBC, OML 102, (May 2007 – September 2007)

Client: ExxonMobil Producing.

Project: MPN EAP, (October 2007 – Date)

Area: 2C OBC 3D.

Duties & Responsibilities

 Maintain, supervise and carry out daily offshore seismic activities.

 Air guns configuration, drop test & air pressure determination.

 Use of BIG SHOT software program for seismic source operations.

 Maintenance, repairs, and deployment/recovery of gun arrays.

 Deployment & recovery of recording Buoy’s (ION’s VectorSeis Ocean (VSO) system)

 Carry out general maintenance, design and repairs of offshore industrial equipments, such as hydraulic systems (HPU), pneumatic systems, winches, cranes, gun strains, etc.

 Manage all Mechanical Engineering activities of seismic cable vessels.

 Design & develop projects to suit all giving/required offshore seismic demands in RXT cable handling vessels.

 Repairs & maintenance of VSO cables, nodes, buoys, etc.

 Repairs, servicing & maintenance of VSO unit power supply source (KUBOTA Diesel Engine 68mm STROKE SERIES.)

 Operation of industrial offshore cranes and winches.

 Maintain companies as well as the client QHSE-MS and procedures.

 Always leading in RXT crew II stop card reporting and as well as safety awareness program (Flag) OCP.

Job Experience

Sep. 04 – April 2007: MECHANICAL ENGINEER

Employer: United Geophysical (Nig.) Ltd. 5b Remi Fani Kayode Avenue Ikeja Lagos. {Integrated Data Services Ltd/United Geophysical (Nig.) Ltd. {Joint Venture.} (IDSL/UGNL JV) (Seismic) Web: www.unitedgeophysical.com.

Client: The Shell Petroleum Development Company of Nig. Ltd. (SPDC)

Project(s): OHURUOZA 3D (2004), OGUALI 3D (2005) [DTE-GPH], OML

22/28 & OML 54 3D prospects (2006/2007) [TTS-GP]

Client: Nigeria Agip Oil Company.

Project: NAOC OML 51, 3D prospect (2006)

Client: Chevron Nigeria Limited.

Project: OML 53 South, 3D prospect (2007).

Duties & Responsibilities

 Procurements, control, maintenance, repairs and installations of Mechanical engineering equipments/materials, such as automobile (fleets), generating sets of various kinds & sizes, valves, pumps, gears, and general machine maintenance, etc.

 Full monitoring/supervision and servicing of all mechanical/engineering equipments and activities.

 Mobilization & de-mobilization processes of Base camps, Staging area, fly camps, Magazine sites, Bomb disposal units, Parking lots, Jetties, Field clinics, Community affairs houses, Muster points, etc in the Seismic industry.

 Schedule operations, and meeting the daily seismic demands with all it’s equipments in thirteen (13) main seismic departments, such as The Survey, Drills, Seismology, Engineering, Recording, Transport, Community affairs, Security, Admin, Maintenance, etc.

 Design preventive maintenance plans & schedules for entire industrial equipments, ensuring total compliance also.

 General Camp maintenance, installations and constructions.

 Installations and repairs of basic/simple electrical power (e.g. conversation of three phases to single phase, etc.)

 Prepare daily, monthly and yearly reports of all engineering activities and processes.

 Effective management of men and material for optimal performance.

 Design crew (Departmental) work descriptions and procedures.

 Coordinate line (field) audit and supervisions in accordance with senior staff crew cross sectional line audit.

 Participate in all SPDC major camp facility, personnel and general audits.

 Reviewing of HSE-MS plan base on client HSE-MS standards, performing job safety analysis and reviewing policies and work procedures to suit the project.

 Coordinating HSE departmental meetings and activities.

 Design/create and initial safety in the department and crew at large.

 Power generation and distribution, Equipment sizing and load evaluation

 Maintains cordiale relationship with all, and cooperates with the management in achieving goals and targets.

Job Experience

2003 – Nov. 2003: GENERAL SUPERVISOR, SERVICES & TECHNICAL.

Employer: Great Global Resources Nigeria Limited.

4b Egbuna Street, Onitsha. (Servicing & Procurements)

Duties & Responsibilities

 Overseeing & managing the entire industrial activities in its five key departments.

 Operation of machine tools such as [milling m/c, lathe m/c, drilling m/c, shaping m/c, surface & cylindrical grinding m/c, etc.]

 Schedule and supervises all daily Engineering/industrial activities, as well as major projects.

 Procurements, Budgeting and planning, presentations & representation.

 Initiate design & execute all company’s entire internal/external projects.

 Always meeting daily set targets.

 Good customer/staff relationship management.

 Reviewing Policies and Work Procedures to suit the project.

2001 – Jan. 2003: MECHANICAL ENGINEERING CO-ORDINATOR. Employer: Frankmolly Enterprises Nigeria Limited. Plot 266 Awka Industrial

Layout Awka, Anambra State.

Client: Ajaokuta Steel Company, Ajaokuta.

Duties & Responsibilities

 Managing, developing, and controlling daily industrial operations.

 Operation of machine tools such as [milling m/c, lathe m/c, drilling m/c, shaping m/c, surface & cylindrical grinding m/c, etc.]

 Participate in steel furnace operations (open hearth & electric furnaces) in Ajaokuta Steel Company.

 Monitor periodic steel purification exercises and conveying schedules.

 Determine & maintain heat generation and its distribution in steel making processes.

 Operation, maintenance & repairs of Hydraulics power & pneumatic systems.

 Create, develop & interprets Engineering (working) drawings and applications.

 Schedule and supervises all daily Engineering/industrial activities, as well as major projects.

 Good customer/staff relationship management.

 Design work procedures and job descriptions to suit the project.

 Monitoring jobs & productions, ensuring total compliance to every set target etc in the industry.



Professional Offshore Qualifications Acquired.

 STCW 95 Training Certificate (Marine Training) - 2007

 Norwegian (Marine) Medical certificate of Fitness - 2007

 Certify crane operator - 2008

 RXT manual handling, C.O.S.H.H & Rigging - 2008

 Safety awareness RXT , Approved operator RXT - 2008

 Banks man/slingers - 2007

 High Pressure Air - 2007

 RXT Introduction to SMS, BP & First aid/CPR - 2007

Professional Training/Courses Acquired.

 Cashes inductions and training.

 Incident representation and classification.

 Project Management (1 – 47 Sessions) & General environmental management.

 Hazardous and general waste management. Fire prevention & control.

 Workshop Practice, Electrical & industrial safety, and First aid 1 & 2.

 Audit skill management training, Accident Reporting and Investigation.

 Permit to work training course and Hearts and Minds training course.

 Health Safety and Environment (HSE) training courses, etc.

EDUCATION

1. Federal Metallurgical Training Institute, Onitsha. - [Duetshe Engineering Co-operation (GTZ) GMBH, Eschborn, Federal Republic of Germany.] HND in (Fachzeichnen Metall) Mechanical Maintenance Engineering, - 2001

2. University of Port Harcourt, Choba, Rivers State. - Mechanical Engineering (2nd Class Honors lower division) B. ENG. - 1998

3. Certificate in Data Processing {appreciations, windows, ms word, ms excel, power point, access, etc} - 2002

Major Audits Attended.

 ISO14001 (DTE-GPH SPDC) - 2004

 ISO 14001 Recertification (DTE-GPH SPDC) & SIEP (SPDC) - 2005

Contact this candidate