Industrial Engineer
Resume:
Ehsan Mirbirjandian
________________________________________
Jacksonville, FL 32254, United States
Mobile: 904-***-****
*****.**********@*****.***
________________________________________
Master (M.Sc.) of Industrial Engineering
Career Objective
Seeking an Industrial engineer position in an organization where my experience and knowledge can be utilized in order to help the firm. I have Master of Industrial Engineering and 3 years of experience in Lean Manufacturing, Time and Motion Study, Continues Improvement , Standardization and Simulation, which can be helpful for my job performance.
Profile
Master (M.Sc.) of Industrial Engineering with 3 years working experience (2.5 years unofficial and 6 months official) in a design and engineering consultation firm, Porcelain production factory and rubber tools production factory from 2005 to 2008 and recently graduated for master of science with high GPA from University Technology Malaysia (Malaysia most famous engineering International and research university). I am willing to relocate to everywhere in United States depends on my job place. My core competences are in Promoting organization and manufacturing systems based on Lean manufacturing concepts, expert in using Lean Manufacturing concepts to eliminate wastes and Non-Value added processes, simplify production system and create flow with using Lean tools such as Performance Management, 5S , Kaizen, Value Stream Mapping, KANBAN, Bottle Neck Analysis, TAKT TIME, TPM , Poka-Yoke and Single Minute Exchange Die (SMED), I am professional in Time and motion studies with MTM, MOST and MODAPTS and work measurement and analysis, Production Standardization and line balancing, Operational and Productivity Improvement with using KAIZEN continues improvement methods, PDCA , DMAIC and using Six Sigma methodology, Value Stream Mapping, Production Planning with several planning methods in Fast Pace production systems, Plant Layout Improvement with using simulation and logical analysis, providing suggestions and setting up guidelines in order to reduce cost and improve productivity, professional Production Simulation, facility Planning and Control, Evaluates and recommends solutions for issues regarding to work flow and material movement through manufacturing processes, Facility locations and allocations, Process Flow Analysis and Job Design, Statistical Analysis and Statistical Process Control.
I am excellent in English communication and English skills (Speaking, Listening, Writing and reading); I have the grade 6 out of 9 in IELTS International English examination system which is equal to IBT TOEFL grade 80/120. Evidences are ready upon request. I am punctual and strict worker and having ability to manage teamwork and work in them.
Keywords: Industrial Engineer , Production Planner , Lean Manufacturing , Master of industrial engineering , KAIZEN , Facility Planning , Motion study , Time Study , Operation management , 5s , Six , Just In Time , quality Control , standardization , Layout improvement , Value Stream Mapping , Job Design , Statistical Analysis
Professional Skills and Core Competences
• Lean Manufacturing Expert Consultant (Expert): Experienced in promoting organization and manufacturing systems based on Lean manufacturing concepts. I am expert in using Lean Manufacturing concepts to eliminate wastes, simplify production system and create flow with using Lean tools such as Performance Management, 5S , Kaizen, Value Stream Mapping, KANBAN, Bottle Neck Analysis, TAKT TIME, TPM , Poka-Yoke and Single Minute Exchange Die (SMED). I have done several projects with using these tools to improve production quality and reduce time and cost and eliminate wastes in manufacturing systems.
• Time and Motion Study, work measurement and analysis (Expert): I am experienced in work measurement and time study and Motion study with using predetermined motion time system (PMTS) tools such as MTM, MOST and MODAPTS
• Production Standardization and line balancing (Expert): I did several projects in Pouya-Gostar Co. to standardize and balance fulfillment production cells to increase productivity and remove Non-Value added and Less-Value added processes.
• Continues Improvement (Expert): Operational and Productivity Improvement with using KAIZEN continues improvement methods, PDCA , DMAIC and using Six Sigma methodology
• Operational and Productivity Improvement (Expert) : I was working in a consultation firm which was giving productivity improvement comments for manufacturing areas and I am experienced and expert in this field.
• Plant Layout Analysis and Improvement (Expert): Draft and design layout of equipment, materials, and workspace to illustrate maximum efficiency using drafting tools and computer.
• Value Stream Mapping (Expert): I am expert in Value Stream Mapping tool as a Lean tool to improve flow of processes and eliminate lost and Non and Less Value added processes.
• Production Planning (Expert): I am experienced in production planning for huge companied with several methods of planning such as Aggregate Planning, Material Resource Planning (MRP), Planning for Push systems and planning for Make to Stocks, Planning for Make to Order and Pull production systems, expert in Chase Level strategies of planning. I was the production planner in Maghsoud Porcelain Company which employed 1500+ employers.
• Process Flow Analysis and Job Design (Expert): Plan and establish sequence of operations to fabricate and assemble parts or products and to promote efficient utilization.
• Facility Planning and Control (Expert): Designing and analyzing production lines, layout optimizations, production planning, Equipment location and allocation, improving production efficiency and system overall proficiency. Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization.
• Production Simulation (Expert): Production simulation and analyzing production system with using simulators. My master project was “A Simulation Study on KANBAN Control Strategies” and the project was passed with Top Mark (A). I was working with Witness Simulation Software which is one of the most professional Simulators.
• Just-In-Time and Make-to-Order/Stock systems analyzing and troubleshooting (Expert): I worked in Pouya-Gostar Company which was one the famous factories in IRAN that engaged the Just-In-Time philosophy and KANBAN tools for make to order production system. I got experience in analyzing these systems while I worked there as expert consultant. I also did my master project in analyzing and troubleshooting JIT and KANBAN control systems with using simulation.
• Implementing and troubleshooting KANBAN control strategies (Expert): I worked in Pouya-Gostar Co. which was using KANBAN as a tool to implement Just-In-Time Manufacturing concept. Several researches have done to detect and solve existent production system problems. The researches have done as my Master Project.
• Quality Control (Advance): Coordinate and implement quality control objectives, activities, or procedures to resolve production problems, maximize product reliability, or minimize costs.
• Ergonomics and Human factors Engineering (Advance): I am advance in ergonomics and assessing labor environmental situation. I did several assignments and projects in this field in my master degree period of time.
• Statistical Analysis and Statistical Process Control (Advance): Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements, and production standards.
Other Fields of skills
Operational Optimization
Project Management and resource allocations
Supply chain management & Logistics
Quality Engineering
Statistical process control & Quality control
Education
Master of Science (M.Sc.) Degree in Industrial Engineering,
• University Technology Malaysia (UTM), Johor Bahru, Johor, MALAYSIA
• Status : Graduated (2009-2011)
• GPA : 3.4/ 4
• Thesis: A simulation study on KANBAN control strategies
• Thesis Mark : A
• University Website : www.utm.my
Bachelor of Science (B. Sc.) Degree in Industrial Engineering (Industrial Production)
• Iran University of Science and Technology (IUST), Tehran, Iran
• Status: Graduated (2001-2005)
• GPA: 14.86 / 20
• Thesis: Designing and feasibility assessment of oil production from oily Kolza seeds
• University Website : www.iust.ac.ir
High School Diploma
• Sama, Mashhad, Iran (2001-2005)
• Field: Mathematics & Physics
• GPA: 18.4 / 20
Relevant Accomplished Courses
Production and Operations Management
Supply Chain Management
Human Factors Engineering
Quality Engineering
Modeling and Analysis of Operations Systems
Research Methodology
Lean Manufacturing
Project Management
Engineering Economy and Accounting
Information Technology for Industrial Engineering
Fundamentals of Computer Programming
Principles of Accounting and Cost Analysis
Work and Time Study
Industrial Units Planning
Advance Production and Inventory Control
Advance Operations Research
Statistical Quality Control
Production Methods
Production Planning
Repair and Maintenance Planning (Engineering Maintenance)
Principles of Simulation
Engineering Statistics
Experiences
University Technology Malaysia (UTM)
Internship Experiences during Master Degree (1 year from 2010 to 2011):
MALAYSIA, Johor Bahru
• Lean Manufacturing Tools
• Continues Improvement
• Time and Motion Study, work measurement and analysis
• Value Stream Mapping
• Operational and Productivity Improvement
• Production Simulation
• Quality Control
• Just-In-Time and Make-to-Order/Stock systems analyzing and troubleshooting
• Implementing and troubleshooting KANBAN control strategies
Iran University of Science and Technology (IUST)
Internship Experiences during Bachelor Degree (2 years from 2003 to 2005):
IRAN, Tehran
• Production Standardization and line balancing
• Operational and Productivity Improvement
• Plant Layout Analysis and Improvement
• Production Planning
• Process Flow Analysis and Job Design
• Facility Planning and Control
• Ergonomics and Human factors Engineering
• Statistical Analysis and Statistical Process Control
Pouya Gostar Khorasan CO.
Manufacturing Department expert consulter, Lean Manufacturing Promoter
(Official Contract) 10th Nov 2008 to 19th Feb 2009
Location: Mashhad, Iran
Company Website: www.partlasticgroup.com
Pouya-Gostar Industrial Company is the largest company in Iran in producing rubber profiles that supplies biggest car manufacturers more than 12 years in this country. I worked for this company for 3 months officially and I did several projects to standardize production lines in fulfillment production part. I was experienced in this company in applying Lean manufacturing tools and way of thinking, Production standardization and line balancing , Layout planning and analysis , Time and Motion Study and Continues Improvement. The production lines were balanced by me and layouts was revised and changed effectively. Several assessments have done to remove the Un-ergonomic working environment factors and these activities lead to increase productivity of cells in fulfillment unit and growing some cells to the universal 95% productivity. I abdicate from this company to pursue my study to master degree.
Reason for leaving this job: Pursuing my study to Master Degree
Maghsud Porcelain Co.
Production planner
(Official Contract) 27th July 2008 to 22nd Oct 2008
Location: Mashhad, Iran
Company Website: www.maghsoudgroup.com
Maghsud Porcelain is one of the largest companies that manufacture porcelains in Iran, which exclusively produces porcelain more than 20 years. This company is one of the largest porcelain companies in the Middle East. I worked for this company for three months as a production planner. The production planning in this company was doing by aggregate planning. I planned two lines of this company during my working period.
Reason for leaving this job: Finding Better Working Position
Saleh Sanat Shargh Co.
Production Analyzer and Consulter, Industrial Eng Department Manager
(Part time Job) 22nd Dec 2005 To 19th Jun 2008
Location: Mashhad, Iran
Saleh Sanat Shargh is an engineering consultation and design company that established in 1998 as a professional team in field of mechanical engineering, industrial engineering and industrial commercial. This company has an engineering network grade in consulting and compiling engineering services and improving manufacturing process.
I was working for this company in Department of Industrial Engineering for 2 years and 6 months from. I began as production analyzer and was promoted to Industrial Dep. Manager after one and half years working.
Reason for leaving this job: Relocation
• Consulting services in production planning by MRP method
• Working in field of technical consultation in quality assurance and suitable tools such as MSA, QFD and PFMEA
• Designing & applying Bill of material (BOM) and doing several production optimization projects
• Promoting to Industrial Engineering Dep. Manager after one and half years working.
Additional Info
Inhabitancy Status: Green Card Holder
United States Work Authorization : Authorized to work for every employer
Gender : Male
Ethnic : White ( Middle East )
Present Country of Living: United States Of America
I am willing to relocate to these states in United States : FL, CA, MI, NY,PA,SC, AL, CO , GA, , IL, MD,LA, NJ, VA, WA, WI
Marital Status: Married
Evidences Status: Evidences will be given upon request
Available to Work: Immediately
Desired Monthly Salary: Minimum 60000 $ / Year
Publications
“A Simulation Study on KANBAN Control Systems”
Singapore: IEEE International Conference (Industrial Engineering and Engineering Management]
Honors and Awards:
Rank 1560 in the nationwide University Entrance Exam for B.S. among more than 1,400,000 participants in Iran, in 2001.
Rank 31 in the Nationwide Superior and Apprehensive Entrance Exam For among more than 100000 participants in Iran, in 1997.
Computer Skills
Microsoft Office: Word, Excel , Access, PowerPoint (All in 2010 version)
CAD/CAM Software: CATIA
Simulation Software: Witness Simulation Software, ARENA
Operation Research Software : LINDO , LINGO
Statistical Software: SPSS, MINITAB
Project Management Software: Primavera Project Planner (P6) , Microsoft Project (MSP)
Computer Programming: TURBO PASCAL, BORLAND DELPHI , C++
Contact this candidate