Mechanical engineer
Resume:
IGOR GENDLIN
North Miami Beach, FL 33162
Phone: 305-***-**** (Home); 305-***-**** (Cell)
E-mail: ******@*****.***
OBJECTIVE: Looking for a long-term engineering position with the company where I can utilize my skills and expertise in design, manufacturing and quality.
SKILLS: 2D/3D design (AutoCAD, Inventor, SolidWorks; I-DEAS; Pro-E); COSMOSWorks; stress and dimensional analysis; reliability; actuators; gears; hydraulic power plant; hydraulic and electromechanical actuation systems, valves, pumps; sheet metal; electrical and mechanical interface analysis; project management; electronic packaging; SixSigma; MIL-STD; ANSI; ASME; FAA; UL certification; project management; hands-on manufacturing support.
EXPERIENCE:
(The following includes all employment experience including direct employee and consultant positions).
TAC Worldwide (Consultant) 6/2009 – 9/2009
SENIOR MECHANICAL ENGINEER: perform difficult engineering tasks that include FEA, a variety of complex features, conflicting design requirements, unusual materials requirements, and coordinate the work of others.
Kuznetsov Residence, Fisher Island, Miami, FL 2/2009-5/2009
PROJECT MANAGER: manage the project to achieve scheduled dates and quality, work with suppliers, contractors and subcontractors.
Aerospace Technology Group (ATG), Boynton Beach, FL 5/2008 – 1/2009
SENIOR MECHANICAL ENGINEER: Design mechanical architecture and electro-mechanical actuation mechanism for aircrafts. Develop product model, harness, BOM, drawings, test plan for HALT and other related engineering documentation. Provide hands-on technical support to manufacture.
Quantachrome Instruments, Boynton Beach, FL 4/2006 – 4/2008
SENIOR MECHANICAL ENGINEER: Design mechanical architecture enclose and packaging including harness sheet metal cabinets. Develop product model, BOM, drawings and other related engineering documentation. Provide hands-on technical support to manufacture.
CUES, Inc., Orlando, FL 4/2005 – 4/2006
SENIOR MECHANICAL ENGINEER: Design mechanical architecture enclose and packaging including electrical and mechanical interfaces (harness) for manufacturing of electronic units using Inventor 10. Develop product model, BOM, drawings and other related engineering documentation. Project management and provide hands-on design and technical support during product manufacture.
Aerotek (Consultant) 10/2004 – 4/2005
DIRECTOR QA & PRODUCTION (for ImagiNail Corp., Largo, FL): Development and implementation of Quality Control system to achieve SixSigma Quality and reliability. Design production line and required SOPs. Develop product model, BOM, drawings and other related engineering documentation.
Real-Time Laboratories, LCC, Boca Raton, FL 11/2003 - 8/2004
STAFF ENGINEER: Development of hydraulic motors / pumps and related ATP, FAI, and FAT for Aerospace and military applications using Inventor and AutoCAD. Design hydraulic motors for flying tanker B767. Work with the customer and vendors. Trouble shooting, failure analysis and provide root cause and corrective action to mechanical-related issues. Provide hands-on design and technical support during product manufacture.
Aerotek (Consultant) 11/2002 – 10/2003
MECHANICAL DESIGN ENGINEER (for JetBlue [LiveTV], Melbourne, FL): Designed mechanical architecture enclose and packaging including electrical and mechanical interfaces (harness) for manufacturing of electronic units using Autodesk software.
Volt (Consultant) 6/2002 – 10/2002
SENIOR DESIGN ENGINEER (for Kaiser Electroprecision, Irvine , CA): Designed aircraft electromechanical actuation system architecture (B&P stage of the project) using Unigraphics, AutoCAD and Pro-E.
Kearfott Guidance & Navigation Corporation, Black Mountain, NC 6/2001 – 5/2002
SENIOR ENGINEERING SPECIALIST: Design B&P, duration and cost. Develop an engineering documentation of electromechanical hardware actuation systems, gear trains and electronic packaging to DOD, MIL and FAA requirements, using DMADV methodology using AutoCAD and I-DEAS. Design actuation flight control system for aircraft Eclipse 500 – electromechanical ball-screw actuators for Speed Break, Trims, Nose and Wings Landing Gears. Perform project management duties. Also perform stress and dimensional tolerance analysis. Develop design requirements of electrical component. Review manufacturing processes. Develop FMEA in manufacturing operation. Use DOE methodology to conform a product quality. Provide training and hands-on manufacturing support.
ATS Reliance (Consultant) 10/2000 - 5/2001
AQE/AME (for GE Appliances): Advanced Quality and Manufacturing engineering support and project mamagement to launch new product to confirm ISO 9000 requirements. Design fixtures and tools using Pro-E and AutoCAD. Develop and review existing process flow and SOP. Certification of industrial machines required for the process. Apply SixSigma tools of DOE, SPC, GR & R, and other quality studies to improve process capability and eliminate defects in areas of extrusion, thermoforming, foaming, and assemble. Use DOE methodology to eliminate CTQs. Provide hands-on manufacturing support.
Technisource (Consultant) 5/2000 - 9/2000
PRODUCTION MECHANICAL ENGINEER (for Motorola, Boynton Beach, FL): Management and engineering support of manufacturing production lane. Reviewed product design and manufacturing processes to provide proposal of the product/process modification to achieve cost reduction, quality improvement, reliability and performance. Trouble shooting, failure analysis. d Provided root cause and corrective action to mechanical-related issues. Hands-on design (Pro-E) and technical support of product manufacture. Develop test and analysis. Design pallets, fixtures and tools. Develop SOP to ensure quality of the product. Work with developer and vendors.
Aerotek (Consultant) 9/1995 - 12/1999
MASTER ENGINEER (for Hamilton Sundstrand, Rockford , IL ): Designed Standards for the “Space Shuttle” Orbiter APU, BFAS and R/SBAS maintenance and overhaul. Perform design using AutoCAD, stress and performance analysis of parts and assemblies. Perform design, trouble-shooting, failure analysis, and corrective action proposal of engine and actuation system for “Space Shuttle”, Titan, Delta and other DOD program. Review manufacturing processes. Develop inspection procedures and acceptance criteria limits. Manage the team assigned to the project.
PROJECT ENGINEER/PROJECT MANAGER (for Walter Kidde Aerospace, Wilson , NC ): Developed the project plan, cost, terms, and schedule. Perform design of hydraulic/pneumatic valves and actuators to DOD and MIL-STD requirements using AutoCAD. Develop required ATP, FAI, and FAT. Work with the customer and vendors. Designed manufacturing process and provided hands-on manufacturing support. Perform Project Management duties and worked closely with the team.
MECHANICAL DESIGN ENGINEER (for following companies: Micromed; PLD, Advanced Automation Systems, Inc., Caribe Aviation, Inc.; Imaging Diagnostic System, Inc.) Designed and performed hands-on manufacturing support of medical diagnostic equipment to insure FDA requirements (Pro-E and AutoCAD). Designed vacuum chamber and enclosure (actuation system of high-speed transport incorporated inside of the chamber) using Mechanical Desktop and AutoCAD. Design industrial equipment, tooling and fixtures to perform overhaul of aircraft components (AutoCAD). Work closely with customers, vendors and manufactories.
Certified Aircraft Parts, Inc., Hollywood, FL 1/1995 - 9/1995
QUALITY ENGINEER / PROJECT MANAGER: Design and managing manufacturing of hydraulic test stand to perform torque/load test of C-130 actuation and engine system. Design special tooling and fixture using Autodesk design software. Develop modification of aircraft assemblies and components IAW manufactory SB & FAA requirements. Develop inspection methods and criteria to ensure conformity with requirements. Work with customer and vendors.
AAR Landing Gear Center, Miami, FL 5/1992 - 12/1994
PROCESS/QUALITY CONTROL ENGINEER: Develop the necessary quality documents and SOP to perform overhaul of aircraft landing gear, flaps and hydraulic actuators. Develop modification of aircraft assemblies and components IAW manufactory SB & FAA requirements.
EDUCATION:
KhSPU: Master's Degree: Mechanical Engineering, - Hydraulic Turbines, Hydraulic / Pneumatic Machines & Automation Control Systems
KhMC: Bachelor's Degree: Manufacturing Engineering - Cold Metal Works,
Machining Technology
Contact this candidate