Mechanical Maintenance
Resume:
Jeff Glover
Sherman, Texas ***92
* Ph: 903-***-**** * Fax: 903-***-**** * E-mail ***********@*******.***
OBJECTIVE: MASTER MECHANIC /TECHNICIAN
EXPERIENCE:
**/** – Present Glover Mowing & Landscaping Company, Sherman, Texas
GENERAL CONTRACTOR / LANDSCAPING / OWNER
I’m an Owner and self-employed of a General Contractor and Landscape Company.
10/11 – 06/12 Scientific Drilling International, Oklahoma City, Oklahoma
MWD TECHNICIAN
As a MWD Technician, I’m traveling to new locations all the time setting up. I’m in charge of setting up on location run all the cables and wiring to the dog house on the main floor of the rig and to the RV trailers that we worked out of and then lay out the tool that we will be running and set it up and test and program it. We run Data model program like MWD Run and Win Log on the lab tops for the tools. Tools we run are setup to run gamma, smart motor and a PRT tool. I check and test all tool like the Pulser, Controller, MWD Eye, Gamma Inc., RFC’s and test the Primary and Back up Batteries before programing the tool. When we are done with all the tools I test and clean all the barrels, RFC’s and Roll test the Eye and batteries.
12/10 – 10/11 Glover Mowing & Landscaping Company, Sherman, Texas
GENERAL CONTRACTOR / LANDSCAPING / OWNER
I’m a self Employed General Contractor and Landscaper. I perform all kinds of work which includes Fabricate and design Wood or Steel Framing, Electrical, Plumbing, Welding, Scaffolding, Millwright Work, Troubleshooting, Refrigeration, Sheet metal work, Welding, Arc, Mig, Tig, Acetylene, Plasma. As an Owner of this Company, I’ve performed all kinds of Construction Work and Landscaping Jobs for Commercial & Residential Customers. I do the highway right of way mowing for (TX-Dot) the Texas Department of Transportation and also for (O-Dot) Oklahoma Department of Transportation. I also mow the city Airports for the City of Sherman, Texas and for the City of Durant, Oklahoma Complete lawn Maintenance & Turf Manicure. I do the Designing & installation of irrigation systems. I have to locate the Line locations of high pressure and low pressure line like water, gas, phone and Electrical lines underground when installing irrigation systems. We do Spraying & Weed control also installation of all kinds of fencing. We do planting of all kinds of Trees, Hedges, Shrubs, Flowers, and Grasses. I do all my own Mechanic work on my equipment, trucks.
08/09 – 12/10 Seadrill America Offshore Inc, Houston, Texas
ASSISTANT CHIEF ENGINEER / MECHANICAL SUPERVISOR
As a Assistant Chief Engineer on a Semisubmersible & Dynamically Positioning rig in Gulf of Mexico, I’m in charge of the Mechanical & Electrical Department and all the Mechanical Equipment on the rig and the Maintenance scheduling of any Mechanical work, Project planning, Setting up yearly budgets for the mechanical department, Ordering parts, Planning equipment updates & upgrades, Daily Crew meeting with the mechanic’s, Weekly Department Safety meeting and Mechanical & Electrical Department, Training and update the M.S.D.S. Safety sheet for the mechanical department and the Performance Appraisal for the Mechanic’s, ERO's, Welders and Motorman’s and monthly Oil Consumption reports and plus weekly oil inventory also Daily engine log reports. I have computer experience PC & PLC and lots of office software programs experience. I have worked and trouble shoot on all kinds of offshore drilling equipment such as, Azimuthing fixed speed, variable pitch thrusters, BJ Varco & National Oilwell Rotary’s, Varco PS-30 Power Slips & Manual Slips, Varco BX-75 elevators, Varco Iron Roughnecks & MOS Roughnecks, Manual Tongs, Hydraulic Casing elevators, Casing, Riser, Drill pipe finger boards, Varco TDS 3 top drive, Oilwell E-3000 Drawworks, Cat heads, National Oilwell A 1700-PT Mud pumps, Thule 100 Shale Shakers, HYDRIL, BOP, LMRP & Control System, National OS-435 Pedestal Cranes, CAT 3616 Diesel Engines with 2500kw Generators, CAT 3508 Diesel Emergency Generator, Alfa Laval Water makers, Alfa Laval Centrifuges, Hydraulics such as Directional Control Valves, Sequence Valves, Relief Valves, Dump Valves, Flow Controls, Vane & Gear Pumps, Hydraulic & Manual & Computer Controlled Automated Machines, Troubleshooting and Installation & Setup of New & Used Equipment & Tooling & Modifications.
10/06 – 08/09 Transocean Offshore USA Inc, Macae, Brazil
MECHANICAL SUPERVISOR
As a Mechanical Supervisor on a Semisubmersible & Dynamically Positioning rig over seas in Brazil, I’m in charge of the Mechanical Department and all the Mechanical Equipment on the rig and the Maintenance scheduling of any Mechanical work, Ordering parts, Daily Crew meeting with the mechanic’s, Weekly Mechanical Department Safety meeting and Mechanical Department Training and update the M.S.D.S. Safety sheet for the mechanical department and the Performance Appraisal for the Mechanic’s, Motorman’s, Thruster Tender’s and monthly Oil Consumption reports and plus weekly oil inventory also Daily engine log reports. I have worked & troubleshooted on all kinds of offshore drilling equipment such as, Azimuthing fixed speed, variable pitch thrusters, BJ Varco & National Oilwell Rotary’s, Varco PS-30 Power & Manual Slips, Varco BX-75 elevators, Varco Iron Roughneck, Manual Tongs, Hydraulic Casing elevators, Casing, Riser, Drill pipe finger boards, Varco TDS 3 top drive, Oilwell E-3000 Drawworks, Cat heads, National Oilwell A 1700-PT Mud pumps, Thule 100 Shale Shakers, HYDRIL, BOP, LMRP & Control System, National OS-435 Pedestal Cranes, CAT 3612 Diesel Engines with 2500kw Generators, CAT 3508 Diesel Emergency Generator, Alfa Laval Water makers, Alfa Laval Centrifuges, Hydraulics such as Directional Control Valves, Sequence Valves, Relief Valves, Dump Valves, Flow Controls, Vane & Gear Pumps, Hydraulic & Manual & Computer Controlled Automated Machines, Troubleshooting and Installation & Setup of New & Used Equipment & Tooling & Modifications.
07/04 – 10/06 Glover Mowing & Landscaping Company, Sherman, Texas
GENERAL CONTRACTOR / LANDSCAPING / OWNER
I’m an Owner and self-employed of a General Contractor and Landscape Company.
03/00 – 07/04 Transocean Sedco-Forex Offshore USA Inc, Houston, Texas
CHIEF MECHANIC / HYDRAULIC TECHNICIAN / SUPERVISOR
My duties as Chief Mechanic Supervisor & Hydraulic Technician, I’ve worked on a High Specification Semisubmersible & Dynamically Positioning rig. I started on this rig in the middle of the construction level when it was being built in Singapore I was in on installing and setting up and testing the new equipment on the rig. I have worked & troubleshooted on all kinds of Hydraulics & Pneumatics offshore drilling equipment such as, BJ Varco Rotary, Varco PS-30 Power & Manual Slips, Varco BX-75 elevators, Iron Roughnecks, Manual Tongs, Hydraulic & Pneumatic Casing elevators, Varco PRS-5 with a RHA on it for drill pipe & riser handling, Automated pipe racking system, Casing, Riser, Drill pipe finger boards, Canrig 1275E top drive, HITEC/Dreco Compensating Drawworks, Cat heads, National 14P 220 mud pumps, B3X Cascade Shale Shakers, MOS pipe handlers, MOS Catwalk machines, Kenz Pedestal Cranes, CAT 3616 Diesel Engines with 11k Generators, Alfa Laval Water makers, Alfa Laval Centrifuges, Kamewa / Mermaid 7MW azimuthal thrusters, Hydraulics such as Directional Control Valves, Sequence Valves, Relief Valves, Dump Valves, Flow Controls, Vane & Gear Pumps, Hydraulic & Air Cylinders, Pneumatic Systems, PLC Electronic Controls, Manual & Computer Controlled Automated Machines, Troubleshooting and Installation & Setup of New & Used Equipment & Tooling & Modifications.
12/98 – 03/00 United Rentals, Sherman, Texas
TRUCK DRIVER / EQUIPMENT HAULER
Duties as equipment hauler Truck driver was picking-up & delivery of all kinds of rental equipment. I did perform mechanical maintenance on the equipment and maintenance on the haul truck I drove, Deliver all kinds of heavy-duty rental equipment Bobcats, Scissor lifts, Sky tracks, Grad alls, Forklifts, Backhoes, Track loaders, Dozers, Track hoes, Motor graders, Delivery equipment in all of North Texas, Southern Oklahoma.
06/97 - 12/98 Johnson & Johnson Medical Inc., Sherman, Texas
MAINTENANCE MECHANIC
My Mechanical duties as a OB Automat Mechanic, High Speed Production Machines, Includes Repairs, Rebuilds, Troubleshooting, Timing, Cams, Pneumatic air cylinders, Hydraulic Valves, Hydraulic Cylinders, Heaters, Case Packers, Change Overs, Setups, Electronic Controls, PLC's, Electrical. Do quality checks of product coming off the machines.
03/84 - 06/97 Oscar Mayer Foods, Sherman, Texas
MAINTENANCE MECHANIC
My Mechanical Maintenance duties, I have to work on all kinds of Gear Boxes, Hydraulic Pumps, Hydraulic & Air Cylinders, Video jet labelers, Label air Labelers, Multi vac Packaging Machines, Slicers, Cams, Pneumatic Systems, Pneumatic air valves, Co extrusion systems, Glue guns & Glue pots, PLC Electronic Controls, Electrical work, Manual & Computer Controlled Automated Machines, High Speed Production Machines, Refrigeration, Sheet metal work, Welding, Arc, Mig, Tig, Acetylene, Plasma, Troubleshooting and Installing New & Used Machines & Setup & Modification and Timings of all Production lines.
02/83 - 03/84 Eisenhower Construction Company, Denver, Colorado
MECHANIC, HEAVY EQUIPMENT OPERATOR
My Mechanical duties were Repairing & Rebuilding Diesel engines, Hydraulic Systems, Fuel Injectors, Transmissions, Pneumatic Valves, and Preventive Maintenance on all Heavy Equipment & Trucks. My Equipment operator duties were Bulldozers, Motor graders, Front-end loaders, Diesel trucks, and Concrete plants. Deliver Heavy Equipment to Different job sights.
04/78 - 01/83 American Coldset Corporation, Addison, Texas
MECHANIC / MACHINIST / QA SUPERVISOR
Mechanical included Rebuilding, Repairing & Troubleshooting Lathes, Mills, NC, CNC, and Equipment. Duties included preventive maintenance & repairs on all machines. A machinist duty includes setups on all Lathes, Mills Nc, Cnc for oil field products Core barrels, Diamond bits etc. Machine parts too close tolerance. Also I setup machine tooling. Fabricate and design parts. Read and machine parts from blue prints. Install New & Used Machines, Setting up & Modification & Update machines. I was promoted Quality Control Supervisor. Also includes assigning and job scheduling. all responsibilities of finish parts before shipping.
04/74 - 03/77 Jerry Paul Higgins Construction Co., Sherman, Texas
HEAVY EQUIPMENT OPERATOR, TRUCK DRIVER
Heavy Equipment Operator includes Bulldozer, Motor grader Front end Loader, Backhoes, Diesel truck Operator & Deliver Equipment to different job sights. Also my duties were to maintain Water Line Systems, and Pump Stations. Maintenance duties include Preventive Maintenance on all Equipment, Repairing & Rebuilding Water Pumps, Fuel Injectors, Transmissions, Hydraulic Pumps, Cylinders, Hoses, and Motors.
EDUCATION:
08/09 - 08/09 WSTC, New Iberia, LA
SAFE GULF TRAINING
Degree: Certificate
12/08 - 1/09 WSTC, New Iberia, LA
HELICOPTER UNDERWATER EGRESS
Degree: Certificate
12/08 - 1/09 WSTC, New Iberia, LA
MARINE FIREFIGHTING / INCIPIENT FIRE FIGHTING
Degree: Certificate
12/08 - 1/09 WSTC, New Iberia, LA
WATER SURIVAL / SWING ROPE TRAINING
Degree: Certificate
11/01 - 12/01 Caterpillar School, Prior, ILL
3600 ENGINE SERIALS MAINTENANCE REPAIR & SERIVICE
Degree: Certificate
6/01 - 7/01 Rexroth Industrial Hydraulics, Allentown, PA
MAINTENANCE REPAIR & SERIVICE HYDRAULICS
Degree: Certificate
3/01- 4/01 Texas A&M University, Houston, Texas
PERSONAL SAFETY & RESPONSIBILITIES COURSE
Degree: Certificate
3/01 - 4/01 Texas A&M University, Houston, Texas
FIRST AID & CPR COURSE
Degree: Certificate
3/01 - 4/01 Texas A&M University, Galveston, Texas
PERSONAL SEA SURVIVAL & SURVIVAL CRAFT COURSE
Degree: Certificate
3/01 - 4/01 Texas A&M University, College Station, Texas
MARINE FIREFIGHTING
Degree: Certificate
10/00 - 11/00 National Fluid Power Institute, New Orleans, LA
INDUSTRIAL & MOBILE HYDRAULICS
Degree: Certificate
10/97 - 12/98 Johnson & Johnson, Texas A&M Fire Brigade, Sherman, Texas
FIRE SCHOOL, HAZMAT TRAINING, RESCUE TRAINING
Degree: Certificate
03/91 - 03/94 Video Jet Inc., Plano, Texas
VIDEO JET LABLERS
Degree: Certificate
05/84 - 08/87 GMD, Oscar Mayer Foods, Sherman, Texas
INDUSTRAIL MACHINES
Degree:
05/83 - 08/83 Texas State Highway Department, Austin, Texas
HEAVY EQUIPMENT OVER 80 HP
Degree: Certificate
10/76 - 03/77 Grayson County College, Sherman, Texas
MACHINE SHOP
Degree: Certificate
PERSONAL:
I'm a 55 years old single male and was born on November 23 1956 in Sherman, Texas. My height is 6'4" tall, Weight is 280 Lb. Good health No physical limitations. I have 3 children. I like a challenge and working with Equipment. My hobbies include Snow Skiing, Camping in the Mountains, Riding 4-Wheelers, Traveling.
REFERENCES: Mike Cole
Transocean Offshore, Inc.
Maintenance Supervisor Rig Sedco 707
1-709-***-**** or 1-709-***-****
********@*******.***
Randal Mitchell
American Health Underwriters
******@***.***
Ted Baca (Owner)
Grayson County Equipment
******@***.***
CERTIFICATES:
I have cerificates if needled. I copy but not think they paste.
Contact this candidate