Project Quality Assurance

CURRICULUM VITAE

PERSONAL DATA

Name : SIGIT SUKOCOADI

Address : PerumKopkar PLN Block M No 07

Batam Centre, Batam, Indonesia

Place/Date of birth : Cilacap, October 08, 1975

Nationally : Indonesian

Education : Senior High School

Passport number : S 773634 Expire date 06 Feb 2014

Contact number : +62-852-****-**** / +62-858-***-***-**

E mail address : ***************@*****.***

SUMMARY OF EXPERIENCES

I have more than twelve years experiences in onshore and offshore industrial oil & gas construction, pre commissioning, commissioning and maintenance, primarily associated with mining gold plant, coal fire power plant, refinery oil and gas and fabrication yard. Specific relevant experiences include lay out, setting, levelling and alignment of rotary equipment, erection and setting of static equipment and experience as the system maintenance, preservation, and lubrication and also familiars use precision tool and parameter such as : Rotalign ultra shaft alignment, Optalign SMART EX laser alignment, vernier caliper, inside and out side micrometer, filler gauge, precision level, dial indicator, vibration meter, infra red temperature, sound level meter, tachometer, anemometer etc.

TRAINING

- Authorized Entrant and Standby Person for Confine Space by National Institute of Occupational Safety and Health (NIOSH) Malaysia on Nov 2011

- OPTALIGN SMART EX Laser Alignment Training by PRUFTECHNIK S.E.A. PTE LTD on Apr 2011

- BOSIET & HUET Training at M&O Indonesia (OPITO) Certificate No. 101209 Date Expire: July 23, 2014

- Light Rigging Training at McDermott Indonesia on Dec, 2010

- Millwright Training at Fluor Daniel Eastern Inc on Jul, 1996 – Oct, 1996

WORKING EXPERIENCES

MALAYSIA INTERNATIONAL SHIPPING CORPORATION BERHAD (MISC BERHAD)

(Oct 2011 – march 2012)

Project :FPS GEMUSUT KAKAP Project

Location :MMHE Fabrication Yard – Pasir Gudang, Malaysia

Position :Mech & Piping PCA (Pre Comms Assurance)/ Mech& Piping inspector as owner

Representative

Responsibility

- Perform monitoring of mechanical & piping test package on Semi Submersible Gumusut Kakap Project.

- Review drawing in accordance with specification, code and standard.

- Conduct inspection in accordance with ITP (Inspection Test Plan).

- Identify quality problem, reject non-conforming items and provide solution to the problem.

- Line checking thru sub-system and mark up P&ID & isometric drawing for all system.

- Support to mech & piping Engineers/supervisors for various activities required for completion of jobs.

- Preparation of test package, planning and execution of preparatory activities. Conduct line checking prior to pneumatic testing.

- Promote safety awareness and safe performance among project team member, including consultans and contractors personel.

- Confirm that the relevant ITR has been utilized for the specific type of equipment being inspected/tested and verify that ITR has been completed correctly.

- Confirm punch lists and ensure each items are valid, categorized correctly and allocated to the correct action party.

PT KARIMUN INDO MULIA (Jun 2011 – Sept 2011)

Project :FPSO TerangSirasunBatur Project

Location :PT Utraco, VME Process Fabrication Yard – Batam

Position :Mechanical Foreman

Responsibility

- Review and verification of mechanical work pack for installation prosedure.

- Implementation quality assurance procedure to make sure that the project has been met.

- Coordinates with painting supervisor regarding schedule of blasting & painting of fabricated supports prior to installation equipment.

- Coordinates with dimention control regarding schedule of position, levelness & elevation prior to installation equipment.

- Monitoring and recording of daily progress report, including lay out, setting, levelling and aligning, pipe alignment and reinstatement of rotary equipment, static equipment such as HP GT compressor, LP GT compressor, condensate transfer pump, Produced water flotation recycle pump, VRU compressor, vessel, exchanger, cooler etc.

- Coordinates with the sub-contractor’s supervisor and foreman for preparation of safety equipment to be installed / erection.

- Provides technical assistance and advance field work notice to sub-contractors for any changes or revision of lines.

- Attached daily meeting with supervisors and Sub-contractor’s representative for project’s highlight and progress status.

- Monitoring all work activities to assure compliance with quality. Standard and project specification.

- Preparation daily production reports and updates the mechanical contraction department’s database.

- Responsible of preservation.

- Coordinate with QC and HSE team for quality and HSE measures.

- Prepare reports for client submission.

PT. ANGKASA ENGINEER INDONESIA (Mar 2011 – Jun 2011)

Project :Gajah Baru CPP Primer Oil Project

Location :PT SMOE Fabrication Yard – Batam

Position :Mechanical Commissioning Technician

Responsibility

- Line checking thru sub-system and mark up P&ID for all system.

- Load test, function test and engine running test of pedestal crane.

- Line flushing, checking and leak test system of Air Instrument, Air utility, Nitrogen distribution, Diesel fuel and Seal gas.

- First fill oil lubrication of Closed drain pump, Condensate transfer pump, Glycol drain pump, Diesel fuel transfer pump, Potable water pump, Hot water pump, Emergency diesel generator, Black start diesel generator, GT generator, and GT compressor.

- Execute Pre-commissioning alignment of condensate pump, potable water pump, hot water pump, closed drain pump, glycol drain pump, GT generator, and GT compressor.

- Bunkering diesel fuel of Emergency diesel generator, Black start generator, diesel bulk storage tank.

- Running test and solo run motor of all rotating equipment.

- Engine running test emergency diesel generator and black start generator.

- Follow commissioning function test procedure.

McDERMOTT INDONESIA (Sept 2010 – Feb 2011)

Project :Platong Gas2 CPP2 Chevron Project

Location :PT McDermott Fabrication Yard – Batam

Position :Mechanical Commissioning Technician

Responsibility

- Flushing lube oil screw compressor 12 hours (3 days).

- Alignment screw compressor to gear box use dial indicator and alignment gear box to motor use laser.

- Line checking thru sub-system and mark up P&ID for all system.

- Line flushing, line checking and leak test system of air instrument, air utility, nitrogen distribution, diesel fuel fuel gas and seal gas.

- Function test and engine running test of pedestal crane and Emergency diesel generator.

- Load test pedestal crane, over head bridge crane and mono reel.

- First fill oil lubrication of stabilizer feed pump, jetting water pump, water injection pump, re-boiler recirculation pump, reflux pump, hot oil circulation pump, closed drain pump, condensate transfer pump, diesel fuel transfer pump, potable water pump, hot water pump, Emergency diesel generator, GT generator, and GT compressor.

- Execute Pre-commissioning alignment of stabilizer feed pump, jetting water pump, water injection pump, re-boiler recirculation pump, reflux pump, hot oil circulation pump, closed drain pump, condensate transfer pump, diesel fuel transfer pump, potable water pump, hot water pump, Emergency diesel generator, GT generator, and GT compressor.

- Bunkering diesel fuel for emergency diesel generator, diesel bulk storage tank.

- Running test and solo run motor of all rotating equipment.

McDERMOTT INDONESIA (Aug 2009 – Sept 2010)

Project :Platong Gas2 LQM2/ Utility2 Chevron Project

Location :PT McDermott Fabrication Yard – Batam

Position :Mechanical Commissioning Technician

Responsibility

- Line checking thru sub-system and mark up P&ID for all utility system.

- Line flushing, checking and leak test system of air instrument, air utility, potable water, diesel fuel.

- Load test, function test and engine running test of pedestal crane.

- Load test for Over head bridge crane, mono reel and survival life boat davit.

- First fill oil lubrication of closed drain pump, diesel fuel transfer pump, potable water pump, hot water pump, emergency diesel generator, black start diesel generator.

- Bunkering diesel fuel of emergency diesel generator, black start generator and diesel bulk storage tank

- Engine running test emergency diesel generator and black start generator

Offshore Thailand gulf (Aug 2010 – Sept 2010)

Responsibility

- Execute Pre-commissioning alignment of potable water pump, hot water pump, fire water pump, fire water booster pump and diesel fuel transfer pump.

- Running test and solo run motor of all rotating equipment.

- Follow commissioning function test procedure.

McDERMOTT INDONESIA (Feb 2008 – May 2009)

Project :North Belut Conoco Project

Location :PT McDermott Fabrication Yard – Batam

Position :Mechanical Commissioning Technician

Responsibility

- Line checking thru sub-system and mark up P&ID for all system.

- Load test, function test and engine running test of pedestal crane.

- Line flushing, line checking and leak test system of Air Instrument, Air utility, Nitrogen distribution, Diesel fuel and Seal gas.

- First fill oil lubrication of closed drain pump, condensate transfer pump, glycol drain pump, diesel fuel transfer pump, potable water pump, hot water pump, emergency diesel generator, black start diesel generator, GT generator, and GT compressor.

- Execute Pre-commissioning alignment of condensate pump, potable water pump, hot water pump, closed drain pump, glycol drain pump, GT generator, and GT compressor.

- Bunkering diesel fuel of Emergency diesel generator, Black start generator, diesel bulk storage tank.

- Running test and solo run motor of all rotating equipment.

- Engine running test emergency diesel generator and black start generator.

- Follow commissioning function test procedure

Offshore Natuna sea (Jun 2009 – Aug 2009)

Responsibility

- Flushing lube oil GT compressor 2 unit, lube oil GT generator 3 unit

- Execute Pre-commissioning alignment of all rotating equipment by laser alignment.

- Running test and solo run motor of all rotating equipment.

- Follow commissioning function test procedure.

McDERMOTT INDONESIA (Aug 2006 – Feb 2008)

Project :Arthit CPP PTT Project

Location :PT McDermott Fabrication Yard – Batam

Position :Mechanical Commissioning Technician

Responsibility

- Line checking thru sub-system and mark up P&ID for all system.

- Load test, function test and engine running test of pedestal crane.

- Line flushing, checking and leak test system of Air Instrument, Air utility, Nitrogen distribution, Diesel fuel and Seal gas.

- First fill oil lubrication of Closed drain pump, Condensate transfer pump, Glycol drain pump, Diesel fuel transfer pump, Potable water pump, Hot water pump, Emergency diesel generator, Black start diesel generator, GT generator, and GT compressor.

- Execute Pre-commissioning alignment of condensate pump, potable water pump, hot water pump, closed drain pump, glycol drain pump, GT generator, and GT compressor.

- Bunkering diesel fuel of Emergency diesel generator, Black start generator, diesel bulk storage tank.

- Running test and solo run motor of all rotating equipment.

- Engine running test emergency diesel generator and black start generator.

- Follow commissioning function test procedure.

Offshore Thailand gulf (Dec 2007 – Feb 2008)

Responsibilities

- Flushing lube oil GT compressor 2 unit, lube oil GT generator 3 unit

- Execute Pre-commissioning alignment of all rotating equipment by laser alignment.

- Running test and solo run motor of all rotating equipment.

- Follow commissioning function test procedure.

TOTAL AUTOMATION Ltd (Aug 2004 – Oct 2004)

(Seconded to Kellog Brown and Root, Commissioning Dept)

Project :Belanak FPSO Conoco Project

Location :PT McDermott Fabrication Yard – Batam

Position :Mechanical commissioning Technician

Responsibilities

- Line flushing, line checking, fungtion test and leak test system of Heating Medium , Cooling Medium, Air Instrument, Air utility, Diesel fuel distribution, Fire water, Nitrogen distribution and Potable water.

- Line checking thru sub-system and mark up P&ID for all utility system.

- Execute Pre-commissioning alignment all rotating equipment of utility system.

- First fill oil lubrication of Hot oil circulation pump, Cooling water circulation pump, Potable water pump, Fire water pump and Emergency diesel generator and diesel transfer pump.

- Running test and solo run motor of all rotating equipment utility system.

PT WIRA MATRA GUNA (Apr 2003 – Apr 2004)

Project : Belanak FPSO Conoco Project

Location :PT McDermott Fabrication Yard – Batam

Position :Millwright Foreman

Responsibilities

- Review and verification of mechanical work pack for installation prosedure.

- Implementation quality assurance procedure to make sure that the project has been met.

- Coordinates with painting supervisor regarding schedule of blasting & painting of fabricated supports prior to installation equipment.

- Coordinates with dimention control regarding schedule of position, levelnes& elevation prior to installation equipment.

- Monitoring and recording of daily progress report, including lay out, setting, levelling and aligning, pipe alignment and reinstatement of rotary equipment, static equipment such as HP GT compressor, LP GT compressor, condensate transfer pump, Produced water flotation recycle pump, VRU compressor, vessel, exchanger, cooler etc.

- Coordinates with the sub-contractor’s supervisor and foreman for preparation of safety equipment to be installed / erection.

- Provides technical assistance and advance field work notice to sub-contractors for any changes or revision of lines.

- Attached daily meeting with supervisors and Sub-contractor’s representative for project’s highlight and progress status.

- Monitoring all work activities to assure compliance with quality. Standard and project specification.

- Preparation daily production reports and updates the mechanical contraction department’s database.

- Responsible of preservation.

- Coordinate with QC and HSE team for quality and HSE measures.

- Prepare reports for client submission.

PT MULTI KHARISMA PERKASA (Oct 1999 – Aug 2002)

Project :Pertamina UP – IV Cilacap

Location :Cilacap, Central Java

Position : Millwright –Lead hand

Responsibilities

- Responsible for the maintenance jobs of all refinery facilities.

- Cary out inspection of all rotating and stationary equipment internal and external.

- Coordinates with unit managers about the jobs to be execute to their respective areas, strictly following area health and safety procedures and regulation.

- Perform daily housekeeping at work site and on maintenance shop.

PT FLUOR DANIEL INDONESIA (Jun 1998 – Aug 1999)

Project :BatuHijau Project

Location :Sumbawa - NTB

Position : Millwright journeyman

Responsibilities

- Lay out, erection and setting belt conveyor, Ship loader, tripper car, agitator, air compressor, seal water pump, sump pump.

- Lay out and erection acetylene plant, oxygen plant, filter press plant, sewage water treatment plant.

- Alignment all rotating equipment use dial indicator.

- Responsible of preservation and lubrication all equipment.

PT FLUOR DANIEL INDONESIA (Jan 1997 –Feb 1998)

Project :Power Plant Project

Location :Port site Freeport – timika, Irian Jaya

Position : Millwright craft

Responsibilities

- Lay out, setting and alignment for steam turbin generator, coal feeder, bowl mill pulveriser, force drought fan, induct drought fan, belt conveyor, tripper car, agitator, air compressor, Hot water pump, sump pump and cooling tower.

- Alignment for all rotating equipment use dial indicator.

- Responsible of preservation and lubrication all equipment.

PT CITRA MEGAH KARYA GEMILANG (Aug 1995 – Jun 1996)

Project :Amoco Mitsui PTA I Project

Location :Cilegon – West Java

Position :Millwright

Responsibilities

- Lay out, erection and setting air compressor, cooling water pump, sump pump and fire water pump.

- Alignment all rotating equipment use dial indicator.

- Responsible of preservation and lubrication all equipment.

Contact this candidate