Maintenance Control

ANTONIO PANARES CATAMBACAN

Bachelor’s Degree Holder in ELECTRICAL ENGINEERING

Diploma Holder in ELECTRONICS ENGINEERING TECHNOLOGY

Eligibility : PASSED PRC NO. 0012511 – REGISTERED ELECTRICAL ENGINEER

Eligibility : PASSED CAREER SERVICE PROFESSIONAL (CSC)

Eligible : ELECTRONICS LABORATORY TECHNICIAN (CSC)

Contact no. : +966-********* – KINGDOM OF SAUDI ARABIA

Email Address: ************@*****.***

Website : www.antonio-catambacan.webs.com

A Professional Instrumentation, Control, Automation, Electrical, Electronics Technologist with total 35 years experiences, 26 years of it from working abroad and 9 years in the Philippines for all areas of Electrical, Instrumentation and Control Systems Automation.

Profile Summary

An ambitious, dedicated and fast learner with an inner initiative and workaholic attitude, strive under pressure and take pride in working to deadlines, and meeting targets on time. Posses a robust understanding of the complexities of Electrical, Instrumentation and Control Systems Automation

Presently involve as Project Management Consultant (PMC) with MARAFIQ Steam Turbine Power Generation 5 & 6. Involve in the inspections and specifications of Instrumentation materials, instruments, controls, DCS systems, PLC systems and field instrumentation for 2 units of 275MW Steam Turbine Power Generation. Implement of approved P&ID, Hook-up drawings, Cable schedules, and Standard Instrumentation practices. Conduct inspections and pre-commissioning and start-up of field instruments and controls for Boilers, FGD, ESP, CEMS, CPP, WTP, FOPS, Demineralization plant and 275MW Steam Turbine Generator.

Involved in the instruments calibration, start-up, repair & maintenance of 28 units (Frame 5, 6, 6FA & 9 DLN) Gas Turbine Power Plant using Mark II, Mark IV, Mark V, & Mark VI GE Speedtronics Gas Turbine Control System used in the Petroleum Development of Oman (PDO) for their Oil and Gas oilfields, gathering stations, & refineries under contract by Thomassen Services & contracting Co. LLC.

Involved in the supervision of the construction, erection, calibration, pre-commissioning and testing of process instruments and control devices associated with the Desalination plant

Involved in the inspection of erected process instruments, and control devices to see to it that it conform the installation standard for efficient process control system

Involved in the erection, construction, commissioning of 2 units 15 MW Frame 5 GAS TURBINE and SENTINEL C GAS TURBINE CONTROL SYSTEM in the Kingdom of Bahrain

Experienced in all areas of Electrical, Instrumentation, Control Systems Automation, construction, commissioning, start-up; and total maintenance of one of the biggest Copper and Gold Processing Plant in the Sultanate of Oman

I was a Lead Engineer, supervising the construction, commissioning, and start-up of 1200 tons/day Mega Paper Mill in Indonesia. I have followed construction as a field engineer, and owner's representative, supervising the contractor, and make field changes necessary to improve or correct design errors or omissions. I am also an active participant in Calibration, loop checkout, and starting up pneumatics and electronics instruments and control devices.

Developed and implemented a Computerized Maintenance Management System (CMMS) for efficient Proactive and Preventive Maintenance function to minimize operation downtime, resulting to machine excellent run ability, which reduces maintenance cost, resulting to increase profitability.

Actively participated in the formulation of Calibration Procedures and forms for the certification of ISO9002 product quality assurance, and implementation of such procedures and forms to maintain the ISO9002 Product Quality Assurance Requirements

I was sent for Trainings on Machine Control System (MCS), Distributed Control System (DCS), Programmable Logic Controllers (PLC) and Observations of process control system and automation in one of the biggest Paper Industry in Valmet-Finland, Bielomatik-Germany, Actipac-Sweden, and Rockwell-Automation-Singapore for Allen Bradley Programmable Logic Controllers (PLC) system design, programming and maintenance.

Attended training course of HONEYWELL EPKS Distributed Control System (DCS) use in PDO Power Plant 1 and 2 DCS control system in Mukahizna, Sultanate of Oman

TRAININGS AND SKILLS

Specialized in Instrumentation and Control / Automation System using Allen Bradley 1785 PLC-5 / Advant 450 ABB - DCS / VALMET Damatic XD MCS system / Honeywell EPKS – DCS System.

Knowledge in Computer software operation like MS OFFICE Professional.

A: TRAININGS / SEMINARS ATTENDED:

I. INSTRUMENTATION, CONTROL & AUTOMATION

1. EXPERION PROCESS KNOWLEDGE SYSTEM (EPKS) 8 – 12 / 03 /2008

(Honeywell DCS for BOP Power Generation Control)

PDO Mukahizna Power Project

Mukahizna, Sultanate of Oman

2. SENTINEL C GAS TURBINE CONTROL SYSTEM 2 – 6 / 04 /2005

(PLC 5 CONFIGURED GAS TURBINE CONTROL SYSTEM)

MASOOD JOHN BROWN INTERNATIONAL

FREE PORT, DUBAI, UNITED ARAB EMIRATES

3. VALMET DAMATIC XD PROGRAMMING COURSE 22 – 27 / 07 / 1997

(PAPER MACHINE MCS)

TAMPERE, FINLAND

4. VALMET DAMATIC XD BASIC & MAINTENANCE COURSE 28/07/1997 – 01/08/1997

(PAPER MACHINE MCS)

TAMPERE, FINLAND

5. ACTIPAC PACKAGING SYSTEMS 22 – 25/ 05 / 1997

Using Allen Bradley 1785 PLC-5 system

GOTENBERG, SWEDEN

6. BIELOMATIK FOLIO, CUTSIZE SHEETERS, WRAPPING, CARTONIZER 26 – 29/ 05 / 1997

AUTOMATION WITH ALLEN BRADLEY PLC-5 System

NEUFEN, GERMANY

7. MAINTENANCE & TROUBLESHOOTING THE 1785 PLC-5 03 – 06 / 03 / 1997

Allen-Bradley Programmable Logic Controllers

Rockwell-Automation, Singapore

8. PROGRAMMING THE 1785 PLC-5 CONTROLLERS 31 / 03 – 03 / 04 / 1997

Allen-Bradley Programmable Logic Controllers

Rockwell-Automation, Singapore

9.1785 PLC SYSTEM DESIGN & ADVANCE PLC'S PROGRAMMING 05 - 09 / 05 / 1997

Allen-Bradley Programmable Logic Controllers

Rockwell-Automation, Singapore

10. SYSTEM PROTECTION AND RELAYING

MSU-IIT, Iligan City, Philippines

11. HOW TO BE AN EFFECTIVE SUPERVISOR

Cellophil Resources Corporation

Gadddani, Tayum, Abra, Philippines

12. INTRODUCTION TO MANAGEMENT BY OBJECTIVES

Cellophil Resources Corporation

Gaddani,Tayum,Abra,PhilippineS

II. HEALTH, SAFETY & ENVIRONMENT (HSE)

1. FIRE SAFETY AND FIRST AID SEMINAR

Cellophil Resources Corporation

Gaddani,Tayum,Abra,Philippines

2. HSE ORIENTATION SEMINAR

Safety Technical Services

Muscat, Oman

3. H2S AWARENESS & ESCAPE

Safety Technical Services

Muscat, Oman

4. JOB HAZARD ASSESSMENT SEMINAR

Petroleum Development Oman

Fahud, Oman

5. PDO – PERMIT TO WORK – PERMIT HOLDER SEMINAR

Petroleum Development Oman

Fahud, Oman

6. PDO – COMPETENT ELECTRICAL PERSONNEL (CEP) LV COURSE

Petroleum Development Oman

Mina Al-Fahal, Muscat, Oman

7. PDO – INITIAL FIRE RESPONSE

Petroleum Development Oman

Fahud, Oman

8.PDO – PERMIT TO WORK – PERMIT APPLICANT SEMINAR

Petroleum Development Oman

Fahud, Oman

9.PDO – GAS TESTING TRAINING

Petroleum Development Oman

Fahud, Oman

PROFESSIONAL WORKING EXPERIENCES:

JULY 2011 – PRESENT JACOBS – ZATE ENGINEERING INC.

(PROJECT MANAGEMENT CONSULTANT (PMC) FOR MARAFIQ STG #5 & #6)

MARAFIQ - YANBU

KINGDOM OF SAUDI ARABIA

ASSISTANT RESIDENCE ENGINEER (INSTRUMENTATION & CONTROL)

• Basic Function and Scope:

To provide general instrument and controls engineering support to the Construction and the Operations team during the project EPC and Startup Phases to ensure operational readiness. To contribute to the resolution of instrument and controls operations, reliability and maintenance issues during the engineering and construction phases of the project.

Upon completion of the project, coordinate with main EPC contractor for the Test packages, handing over of documentation, and O&M manuals. To provide expert engineering technical support to ensure that a wide range of instrument & control systems in the STG #5 & #6 are operated and maintained in line with best world-class practices and standards.

• Task, Duties, and Accountabilities:

• To direct and coordinate the activities as Client representative to the Main EPC Contractor of multi-disciplinary technical experts in the Instrumentation and Control section ensuring the proper erection and construction in line with correct practices of the Instrument & Controls systems of the plant.

• To provide technical inputs to MARAFIQ – STG #5 & #6 projects and extend the required support and assistance during commissioning and startup.

• To enforce the implementation of Company Health, Safety and Environment Management System (HSE-MS) and asset integrity reliability management system (AIRMS), and promote awareness of its use among Main EPC Contractor and its sub-contractors.

• To monitor and inspect construction activities and identify opportunities to improve the performance of Instrument, DCS, ESD system, Fire & Gas system, custody meters & Telecom and Paging system.

• To control and authorize implementation of application software modification in DCS, ESD system, Advance Process control and Real Time Information systems.

• To ensure the documentation and security of control software, system backups, and policies and procedures manuals upon completion of the project.

• Collaborates and provides appropriate consultation with the Main EPC Contractor’s Instrument and Controls engineers, Process engineers and HSE engineers in the Central Engineering organization.

APRIL 2009 – JUNE 2011 THOMASSEN SERVICES & CONTRACTING CO. LLC

(MAIN CONTRACTOR FOR MAINTENANCE OF PDO POWER GENERATION UNITS)

PO BOX 476 – AL-HARTHY COMPLEX

MUSCAT - 118

SULTANATE OF OMAN

INSTRUMENTATION & CONTROL ENGINEER

AREA OF RESPONSIBILITY:

FRAME 5, 6, 6FA, & 9E DLN – GAS TURBINE INSTRUMENTATION & GE-SPEEDTRONICS CONTROL

FRAME 5, 6, 6FA, & 9E DLN - GAS TURBINE GENERATOR INSTRUMENTATION & CONTROL

MARK II, MARK IV, MARK V, & MARK VI GE SPEEDTRONICS GAS TURBINE CONTROL SYSTEM

GAS TURBINE, GENERATOR, AND FACILITIES SAFEGUARDING FIRE & GAS PROTECTION SYSTEM TURBINE & GENERATOR AIR FILTER / PULSING SYSTEM

BOP GAS TREATMENT AND PRESSURE REDUCING STATION

JOB DESCRIPTION:

Responsible for the annual maintenance (CI, HGPI, MAJOR) overhaul of Mark II, IV, V, & VI - GE Speedtronics Gas Turbine Control System

Responsible for the annual maintenance (CI, HGPI, MAJOR) overhaul ON/OFF based field instruments like Calibration check within tolerable limits

Responsible for the total maintenance and functional checks of Gas Turbine, Generator, and Facilities Safeguarding Fire & Gas Protection & Detection system

Responsible for the repair & maintenance/calibration checks of gas treatment & pressure reducing station field instrumentation

Monitor stock level of spare parts, tools, and materials using Computerized Stock Inventory System for the annual CI, HGPI, or MAJOR overhaul of Gas Turbine Generators

APRIL 2006 – APRIL 2009 THOMASSEN SERVICES & CONTRACTING CO. LLC

(MAIN CONTRACTOR FOR MAINTENANCE OF PDO POWER GENERATION UNITS)

PO BOX 476 – AL-HARTHY COMPLEX

MUSCAT - 118

SULTANATE OF OMAN

INSTRUMENTATION & CONTROL / FIRE & GAS TECHNICIAN

AREA OF RESPONSIBILITY:

FRAME 5, 6, 6FA, & DLN – GAS TURBINE INSTRUMENTATION & GE-SPEEDTRONICS CONTROL

FRAME 5, 6, 6FA, & DLN - GAS TURBINE GENERATOR INSTRUMENTATION & CONTROL

TURBINE & GENERATOR AIR FILTER / PULSING SYSTEM

MARK II, MARK IV, & MARK V GE SPEEDTRONICS GAS TURBINE CONTROL SYSTEM

GAS TURBINE, GENERATOR, AND FACILITIES SAFEGUARDING FIRE & GAS PROTECTION SYSTEM

BOP GAS TREATMENT AND PRESSURE REDUCING STATION

JOB DESCRIPTION:

Responsible for the total maintenance of Mark II, IV, & V - GE Speedtronics Gas Turbine Control System

Responsible for the total maintenance of Gas Turbine, Generator, and Facilities Safeguarding Fire & Gas Protection & Detection system

Responsible for the repair & maintenance of gas treatment & pressure reducing station

Monitor stock level of spare parts, tools, and materials using Computerized Stock Inventory System

APRIL 2005 – APRIL 2006 BAHRAIN ELECTRICITY SUPPLY & TRANSMISSION W.L.L.

CAPTIVE POWER STATION

HIDD, KINGDOM OF BAHRAIN

INSTRUMENTATION & CONTROL / FIRE & GAS TECHNICIAN

AREA OF RESPONSIBILITY:

15 MW TURBINE INSTRUMENTATION & CONTROL

32 MW TURBINE GENERATOR INSTRUMENTATION & CONTROL

SENTINEL C GAS TURBINE CONTROL SYSTEM

GAS TURBINE, GENERATOR, AND FACILITIES SAFEGUARDING FIRE & GAS PROTECTION SYSTEM

TURBINE & GENERATOR AIR FILTER / PULSING SYSTEM

GAS PRESSURE REDUCING STATION

JOB DESCRIPTION:

Responsible for the Total Maintenance of Allen-Bradley PLC-5 Programmable Logic Controllers for Sentinel C Gas Turbine Control System

Responsible for the Total Maintenance of Gas Turbine, Generator, and Facilities Safeguarding Fire & Gas Protection and Detection System

Responsible for the total maintenance of communications system used in the Power Plant wide which includes, EPABX & telephone units.

Involved in the design, development, specification, and acquisition of additional instruments for the expansion, and modification of unreliable existing process control system

Completed design and Implementation of Computerized Preventive Maintenance Management System for continuous machine operation, resulting to increased machine run ability and minimize downtime.

Recommends renovations of existing Instrumentation Control Loops for more safety of machine operators and maintenance crew

Monitor stock level of spare parts, tools, and materials using Computerized Stock Inventory System

AUG 2002 – APRIL 2005 DANWAY ELECTRICAL & MECHANICAL ENGINEERING

Sub-contractor of FISIA ITALIMPIANTI

COMBINED CYCLE POWER & DESALINATION PLANT PROJECT

RUWAIS, ABU DHABI

UNITED ARAB EMIRATES

INSTRUMENTATION SUPERVISOR

AREA OF RESPONSIBILITY:

Seawater Screening, Chlorination, & Pumping Station

Distillers / Evaporators ( 6 units of 16 MIGPD )

Re-mineralization and Potable Water Pumping Station

JOB DESCRIPTION:

Material take-off as per hook-up drawings and generate reports for the materials required in the whole instrumentation section of the Desalination plant.

Generates schedule of works to be done in Daily basis, forecast schedule in weekly basis, and generates daily activity reports, as well as weekly progress reports for the Instrumentation section of the Desalination plant.

Project lead supervisor in the construction, erection and implementation of approved C&I construction drawings for the Instrumentation and process controls of the Desalination Plant.

Involved in the quality inspection of erected field instruments and process control devices, recommends and correct process control loop so that efficient control system would be achieved and minimize equipment downtime.

Involved in the calibration, pre-commissioning, and testing of field instrument and control system after erection had been completed

Involved in the documentation of as built drawings for the C & I of the whole Desalination plant.

JAN 1997 – FEB 2002 PT RIAU ANDALAN KERTAS

A MEGA PAPER MILL INDUSTRY

Riau, Sumatera, Indonesia

INSTRUMENTATION / AUTOMATION SPECIALIST

AREA OF RESPONSIBILITY:

Bale Pulper, Chemical / Stock preparation area,

Paper Machine (VALMET - 9 meters paper wide x 1500 MPM speed)

Winders and Rewinders (Jagenberg – Germany)

Roll Wrapping machine and Intermediate Roll Storage

Polio Sheeters Cut Size Sheeters, Ream Wrappers, Cartonizers, Palletizers

Shrinking & Packaging System

JOB DESCRIPTION:

Project Lead Engineer in the construction, commissioning, & Start-up of ABB-DCS, VALMET-DAMATIC XD (MCS) and Instrumentation portions of the 1200 MT/D Mega Paper Mill

Responsible for the total repair & maintenance of process instruments, Paper machine control / automation system, Winders & Re-winders automation system, Roll wrapping machine automation, Intermediate roll storage automation system, Polio & Cut size sheeters automation, Ream wrapper automation, cartonizer automation, Palletizer automation, & Packaging system automation.

Completed Design and Implemented Computerized Preventive Maintenance Management System for excellent machine run ability, and increased profitability.

Involved in the preparation for the Calibration Procedures, Trainings, and Implementations in readiness for acquiring Certifications for ISO 9002 Quality Assurance International Standards

Involved in the supervision to resolve the Y2K compliance of all instruments for the new Millenium

Reviewed and corrected VALMET Damatic XD DCS configuration & programming, and Instrumentation Process Control Loops for more efficient Process Control, resulting to better product quality

Reviewed and corrected Allen Bradley PLC-5 configuration & programming for better and efficient machine automation use in Folio Sheeters, Cut-size Sheeters, Wrapping lines, Cartonizers, Palletizers and Packaging systems.

Recommended renovations of existing Process Control Systems; and Automation for more safety and continuous machine operations considering the safety of the Operators, and maintenance crews

In-charged in the training of Instrumentation technician in the repair, fault finding, troubleshooting and maintenance of process instruments and control devices

Monitored stock level of spare parts, tools, and materials using Computerized Stock Inventory System

DEC 1984 – DEC 1996 OMAN MINING COMPANY LLC

COPPER AND GOLD PROCESSING / MINING INDUSTRY

Sohar, Batinah Region Sultanate of Oman (Middle East)

ELECTRICAL / INSTRUMENTATION TECHNICIAN

AREA OF RESPONSIBILITY:

Primary Crusher, Primary ball mill, Carbon-gold extraction leaching tank

Gas boilers, Gas furnace, Electro-winning cells, & dewatering filter machine

Concentrator’s primary & secondary ball mills, Flotation, Rotary Kiln dryers

Pelletizing plant, Copper Smelting Electric Furnace, Anode converters, & Anode Furnace

Anode casting machine, & Copper cathode refinery plant

JOB DESCRIPTION:

Responsible for the total Maintenance of Allen-Bradley SLC-500 Programmable Logic Controllers for Motor controls and Inter-locking; Electrical installations and machineries; and Instrumentations used in 1200 MT/D GOLD processing .

Responsible for the total maintenance of Electrical installations and machineries, and Instrumentation Process Control System used in 3000 MT/D COPPER Processing Plant.

Responsible for the total repair & maintenance of SCADA, RTU, & Telemetry system used in remote seawater booster pumping stations

Responsible for the total maintenance of Communications system used in the Plant wide which includes, EPABX, Radio links, Radio remote control scoop loaders, and CATV system.

Involved in the design, development, specification, and acquisition of additional instruments for the expansion, and modification of unreliable existing process control system

Completed design and Implementation of Computerized Preventive Maintenance Management System for continuous machine operation, resulting to increased machine run ability and minimize downtime.

Reviewed and corrected Electrical Controls well as Instrumentation Process Control Loops for more efficient machine operations and increased product quality.

Recommended renovations of existing Electrical Installations and Instrumentation Control Loops for more safety of machine operators and maintenance crews

Monitored stock level of spare parts, tools, and materials using Computerized Stock Inventory System

AUG 1981 – DEC 1984 CELLOPHIL RESOURCES CORPORATION

UNBLEACHED CRAFT PULP MILL

Gaddani, Tayum, ABRA Philippines

ELECTRONICS SUPERVISOR

AREA OF RESPONSIBILITY:

Wood Chipping Area, Cooking Section, Washing Section, Pulp Dewatering Machine, Pulp Machine

Steam Turbine Power Generation, Recovery Boiler, Lime Kiln, & Water Treatment Plant

Researced and Laboratory / Analytical Instruments

JOB DESCRIPTION:

In-charged in the design, development, specification, and procurement of additional instruments for expansion and modifications of unreliable existing process control system.

Responsible for the repair and maintenance of the following:

A) Electronics and Pneumatics Instrumentation associated in Lime kiln; Chips cooking plant; Pulp washing plant; Pulp dewatering plant; Recovery boilers; Evaporators; 10.6 MW Steam turbine generator and Water treatment plant.

B) Industrial Electronics such as: Recovery boiler Electrostatic Precipatator; Chipper/Crusher metal detectors; Variable speed DC drives in Pulp dewatering machines; Turboturn Electronics speed supervision and control system of Steam Turbine Generator; and automatic bale machines.

C) Communications System such as: GTE crossbar exchange; Communique portable radio transceivers; Radio repeaters; and Intercom and paging system.

Prepared preventive maintenance schedules for Instrumentation, Industrial Electronics, and Communication System.

Monitored performance and results for safer, reliable, and more efficient operation considering the safety of operators, and maintenance crews

Take charged in maintaining discipline among personnel under my supervision, training, records keeping, and evaluating subordinate performance.

Assisted Electrical engineer in the preparation of annual budget in Electronics, Instrumentation, and Communication spare parts and workshop equipments

Monitored stock level of spare parts & initiate stock level to purchase using computerized Stock Inventory Management system.

MAY 1978 – AUG 1981 MSU-ILIGAN INSTITUTE OF TECHNOLOGY

A Technological Institution / School

Tibanga, Iligan City Mindanao, Philippines

ELECTRONICS LABORATORY TECHNICIAN

JOB DESCRIPTION:

Responsible for the repair and maintenance of all electronics equipment; Instrument; and Electronics trainers used in the University and Technological Institution like Digital & analog multi meters, Oscilloscopes, Power supplies, AF & RF generators, watt meters, LAB-VOLT laboratory equipment & trainers.

Prepared the laboratory equipments; trainers; and tools needed and assist Laboratory classes from time to time.

Make some improvements on trainers and fabricated other trainers that would make Laboratory classes more efficient. Conducts inventory of equipment and tools used during laboratory classes from time to time.

May 1978 – Aug 1981 ILIGAN CITY TECHNICAL INSTITUTE

A Technical Institution / School

Iligan City Mindanao, Philippines

PART TIME INSTRUCTOR

JOB DESCRIPTION:

Conducted lectures on Basic Electronics, Electronic Devices, Industrial Electronics, Instrumentation and Control Sys. Conducted Lectures on Principles of Communication system such as: EPABX; AM/FM Radio transceivers, and receivers, VHF and UHF radio transceivers, Radar and Microwave system.

Conducts laboratory classes on Basic Electronics devices, Industrial transducers, Instrumentation and control system, Transceivers operation and maintenance

EDUCATIONAL ATTAINMENT:

BACHELOR OF SCIENCE IN ELECTRICAL ENGINEERING 1974 - 1978

- Electrical Machine and Controls Design including Variable speed drive controls and PLC system.

MINDANAO STATE UNIVERSITY

Marawi City, Mindanao, Philippines

DIPLOMA IN ELECTRONICS ENGINEERING TECHNOLOGY 1973 - 1976

- Major in Communications and Industrial Electronics with volunteer instructors from Netherland for three years to introduce Electronics Engineering Technology which includes lectures on Basic Electronics Circuits and components, Advance Electronics Control techniques, and Design of Electronics Control systems.

MINDANAO STATE UNIVERSITY

ILIGAN INSTITUTE OF TECHNOLOGY

Iligan City, Mindanao, Philippines

__________________________________________________________________________

ELIGIBILITY:

1. CAREER SERVICE PROFESSIONAL PASSED - 71.83 %

2. ELIGIBLE ELECTRONICS LABORATORY TECHNICIAN Unassembled Examination

AWARDS RECEIVED:

1. Graduated in Electronics Engineering Technology with HIGHEST HONORS Average Grade - 1.25

2. Academic Distinction Awardee SY 1974 - 1975

SPORTS:

1. Golf (H/C = 22)

2. Lawn Tennis

3. Table Tennis

PERSONAL DETAILS:

Marital Status : Married

Nationality : Filipino

Date of birth : February 23, 1957

Languages Spoken: English / Tagalog / Bahasa Indonesia

Passport Number : EB2084904

Passport Expires : March 14, 2016

Contact this candidate