CURRICULAM VITAE
E.NARENDRA KUMAR,
House no.11-166.
Gopalapatnam,
Visakhapatnam. India.
Mobile no.- 006*********
Mobile no. India :- 009***********
Email: me32qx@r.postjobfree.com, me32qx@r.postjobfree.com
_______________________________________________________________________________
CAREER OBJECTIVE:
TO WORK IN A REPUTED ORGANISATION WHERE MY KNOWLEDGE AND EXPERIENCE CAN BE IMPLEMENTED AND WHERE MY GOALS ARE INLINE WITH THE COMPANY MISSION AND VISION.
TECHNICAL QUALIFICATIONS:
DIPLOMA IN MECHANICAL ENGG. APR 2001
STATE BOARD OF TECHNICAL EDUCATION AND TRAINING,
SCHOOL : T.P. POLYTECHNIC.
ACADEMIC QUALIFICATIONS:
10th STD (HIGH SCHOOL LEAVING CERTIFICATE) MAR 1996
CENTRAL BOARD OF SECONDARY EDUCATION
SCHOOL: KENDRIYA VIDYALAYA NO.1, SRI VIJAY NAGAR, VISAKHAPATNAM
EXPERIENCE SUMMARY
Total 9 years of experience in Marine & Offshore, Onshore petrochemical plants in QAQC co-ordination of Fabrication and erection of process piping, Pressure vessels, Structural, Tanks and production out of which
7 years of experience in QAQC.
2 years of experience in production.
TECHNICAL SUMMARY
CSWIP 3.1 WELDING INSPECTOR. CERTIFICATE NO:- 33458
ASNT LEVEL-II IN UT, RT, DPT, MPT.
KNOWLEDGE ON GA DRAWINGS, ISO METRIC, P&ID AND ALL TYPES OF DETAIL DRAWINGS.
KNOWLEDGE ON STANDARDS AND CODES LIKE ASME SEC IX, SEC V, AWS D1.1. ASME / ANSI B31.3 .
KNOWLEDGE ON WPS AND PQR
KNOWLEDGE ON HYDROTEST TEST PACKAGE PREPARATION
KNOWLEDGE ON LINECHECKING, PUNCH LIST PREPARATION AND CLEARANCE
DETAILS OF EXPERIENCE:
FROM FEB 2010 TO TILL DATE
COMPANY: Rotary Engg limited. SINGAPORE
PROJECT: SINGAPORE PARALLEL TRAIN (OLIFINES RECOVERY
PROJECT).
CLIENT EXXON MOBILE
POSITION QA/QC Engineer.
DUTIES AND RESPONSIBILITIES:
1 Daily monitoring welding activities and involve in inspection activities during fabrication and installation.
2 Looking over all the welding inspection activities (before, during and after welding) Inspections including WQT.
3 Interpretation of RT films and review of other NDT reports , monitoring rejection rate and welders performance.
4 Preparation of QCP, WPS, ITP’s,Method of statements and all other QC documents.
Attending QC meeting with client and consultant.
DETAILS OF EXPERIENCE:
FROM OCT 2008 TO AUG 2009
COMPANY: TTJ Design and Engg. SINGAPORE
PROJECT: MARINA BAY PROJECT.(Duplex stainless steel)
POSITION QA/QC ENGINEER.
DUTIES AND RESPONSIBILITIES:
5 Preparation of QCP, WPS, ITP’s,Method of statements and all other QC documents.
Attending QC meeting with client and consultant.
6 Involve in inspection activities during fabrication and installation.
7 Looking over all the welding inspection activities (before, during and after welding) of duplex stainless steel inspections including WQT.
8 Interpretation of RT films and review of other NDT reports , monitoring rejection rate and welders performance
9 Review of PWHT reports and charts.
10 Witnessing and clearing the inspections initial stage to final stage like material inspection, fit up, weld visual, NDT, ferrite, PMI, final dimensions and erection at site.
11 Preparation and reviewing of final documents for handing over to client.
DETAILS OF EXPERIENCE:
FROM MAR 2008 TO SEP 2008
COMPANY: TECHNIP ITALY SPA. KUWAIT
PROJECT: OL2K EXPANSION PROJECT.
POSITION QC INSPECTOR PIPING/WELDING.
CLIENT THE KUWAIT OLIFINS COMPANY (FLOAR)
DUTIES AND RESPONSIBILITIES:
12 Involve in inspection activities during installation.
13 Preparation, final review and getting approval of test packs.
14 Line check and Punch listing , review of test packages for welding and NDT .
15 Review of RT films and other NDT reports , monitoring rejection rate and welders performance
16 Review of PWHT reports and charts
17 Release for hydrostatic test and witness the same.
18 Co-ordinate with Client for Final Inspection Actives.
DETAILS OF EXPERIENCE:
FROM APRIL 2007 TO DEC 2007
COMPANY: HI-ASIA ENGINEERING WORKS. SINGAPORE
PROJECT: ABAN ABRAHAM AND NEPTUNE EXPLORER.
POSITION QA/QC ENGINEER.
DUTIES AND RESPONSIBILITIES:
19 Planning of inspection activities.
20 Coordination with all the inspectors for daily inspection load.
21 Inspection at various stages of fabrication, visual inspection during welding and after welding..
22 Involve in inspection activities during fabrication and installation.
23 Witnessing welders qualification as per WPS.
24 Line check and preparation of punch list.
25 Preparation and getting approval of test packs.
26 Mechanical clearance checks before hydro test.
27 Witnessing hydro test according to the test pack.
28 Involved in study of GAD, P&ID and isometric drawings.
29 Raw material inspection as per mill certificates.
30 Heat treatment process (solution annealing).
FROM MAY 2005 TO APRIL 2007
COMPANY: WALCAHNDNAGAR INDUSTRIES LTD. INDIA
PROJECT: VIZAG VESSEL PROJECT.
POSITION QA/QC ENGINEER.
DUTIES AND RESPONSIBILITIES:
13 Studying & Interpreting Customer Specification & Requirement.
14 Planning of inspection activities.
15 Preparing Quality Control Plan and measurement plan.
16 Preparation of Welding & Testing plan, inspection procedures, NDT drawings according to spec.
17 Inspections of incoming and free issue material and equipments.
18 Inspection at various stages of fabrication and getting clearance from owner as per QCP like part identification/Material Verification, fit up inspection, weld visual inspection, final dimension check, level inspection etc..
19 Welding inspection & monitoring according to the WPS, customer requirements.
20 Co-ordination with NDT, Design, Production, Planning.
21 Witness of hydro test, Pneumatic test, hardness test etc as per requirements.
22 Preparation of final documentation according to the customer requirements.
FROM APR 2001 TO MAY 2005
COMPANY: L&T E.C.C DIVISION. INDIA
PROJECT: VIZAG VESSEL PROJECT.
POSITION QA/QC ENGINEER/PRODUCTION.
DUTIES AND RESPONSIBILITIES:
23 Carbon steel pipes of various sizes, varying schedule, different grades and for various systems were fabricated and inspected.
24 Alloy and stainless steel pipes were fabricated and inspected.
25 Inspection and testing of raw materials i.e. plates pipes..
26 Carrying out welder qualification test.
27 Qualification of PQR.
28 Inspection at various stages that include.
29 Material identification and raw material inspection as per drawings.
30 Joint preparation, Fit-up and Direction of line.
31 Edge preparation as per specifications.
32 Welding inspection and back grinding inspection.
33 Witnessing the liquid penetration test.
34 Pre-heating and stress relieving activities.
35 Interpretation of radiographic images.
36 Preparation of necessary documents for the above activities after getting the approval from the client.
1 SOFTWARE EXPLOSURE:
Operating System : Windows NT, Windows 98, and DOS.
Other Packages : Good knowledge in AUTOCAD Drafting & MS-OFFICE.
PERSONAL COMPETENCES:
“ELICITING A CAN DO” ATTITUDE AND WATCHING PROBLEMS AS A SOLVABLE.
PERSONAL DETAILS:
Father name : E.Rama rao
Date Of Birth : 13-09-1980
Marital Status : Unmarried.
Nationality : Indian.
Languages Known : Hindi, English &Telugu
PASSPORT NO. : Z2076955.
SINGAPORE DRIVING LICENCE: G7997612T