Engineer Project
Resume:
PATRICK A. HADLEY
**** *********** ***, *******, ** 30349
Cell: 678-***-**** E-mail: m2fok2@r.postjobfree.com
STATEMENT OF CAPABILITIES
If you are looking for an engineering project manager to manage and lead a product development team, you have found the right person. My experience ranges across multiple industries and there is no project I can’t handle. I have managed complete engineering projects with cross-functional teams and I have been responsible for detailed design. I have in depth experience in leading and supporting new product development projects involving conceptualization, design, research & development, testing, prototyping, release, production implementation and post-launch support in a matrix environment. I have extensive experience in organizing and managing multiple projects, and meeting deadlines. I have over 17 years of product design and development engineering experience. I will initiate, develop and implement ideas to enhance the company product line, to reduce cost or improve the company standards, processes and procedures. I will develop and manage project work scopes, risk, schedules, costs, quality and resource requirements, and serve as a highly effective and adaptive project manager. The majority of my direct experience has been with mechanical and electromechanical new product development; however, my PROJECT MANAGEMENT skills and experience will allow me to contribute to any engineering organization.. My skills will allow me to identify and implement best practices, and transfer knowledge of customer needs and solutions and contribute to the continued development of any high-performance engineering organization.
AREAS OF EXPERTISE AND PERFORMANCE
Project Planning
• Requirements and scope definition
• Separation of projects into phases where appropriate
• Detailed WBS and resource loaded schedules
• Baseline schedules, and budgets
• Earned value analysis
• Integration of engineering, quality, procurement, and finance
Project Execution
• Direct and lead project teams
• Manage project requirements and project scope to keep project on track
• Distribution of information according to communications management plan
Project Monitoring and Controlling
• Manage changes and integrated change control
• Updates to schedule, scope, EVMS, WBS, and work packages
• Management reports and tracking of project performance to baselines
ENGINEERING & PROJECT MANAGEMENT EXPERIENCE – Summary
• Shock and vibration analysis and testing on military vehicles and airframes
• Military and Government earned value project management (EVMS) and Microsoft project scheduling
• Project Management/Cost Account Management (CAM) and Scheduling experience
• Experience managing teams using PTC Routed Systems Designer(RSD) and Pro Cable
• In depth experience in the design, development, prototyping, and release of new products
• Proven ability to engineer solutions and solve problems at concept, prototyping, and after production
• Capable of generating designs and doing analysis using Unigraphics 10,000+ hours, Pro-E 10,000+ hours, Solidworks 10,000+ hours, CATIA 2000 hrs, or Auto CAD Inventor 2,000+ hours
• Design validation and analysis using Cosmos FEA
• In-depth experience with Geometric Dimensioning and Tolerancing (GD&T) and drawing checking
• Design of Experiments (DOE) Training
• Design for Manufacturing training (DFM)
• DFMA/PFMEA Training
• Six Sigma Training
• Worked on projects from detailed engineering design, to manufacturing, and construction
• Experience with development testing and validation for product design and prototypes
• Extensive experience in meeting deadlines, managing multiple projects, and leading teams
• Managed projects ranging from $100K to over $100M
• Supervised 7-10 designers and engineers
• Saved companies over $1,200,000 in 16 years as an engineer
• Teambuilding, Leadership, & Sales training
PATRICK A. HADLEY
3510 Renaissance Cir, Atlanta, GA 30349
Cell: 678-***-**** E-mail: m2fok2@r.postjobfree.com
EDUCATION
MBA, University of Michigan, Flint, Dec. 2000
BS Mechanical Engineering, University of Arkansas, Fayetteville, Dec. 1992
CERTIFICATIONS
Crystal Reports 2011 Certification
Microsoft Project 2007 & 2010
PMI Project Management Professional (PMP) Credential, Dec, 2010
PROJECT MANAGEMENT EXPERIENCE
BOMBARDIER AEROSPACE, MONTREAL, CANADA (3/12-6/12) Contract Employee
Bombardier Aerospace designs and manufactures aircraft for domestic and international markets.
Integration Team Lead and Project Coordinator
• Responsible for leading cross-functional teams to integrate electrical, mechanical, and interior systems installation on aircraft
• Lead the following teams:
Avionics
Hydraulic Systems
Fuel and Inerting
Water/Waste
Oxygen
Fire Detection and Extinguishing
ECS
Landing gear
Interiors
• Requirements definition and specification development
• Create and lead the management reports, and design reviews
• Communicate and lead suppliers developing components and installing systems
BOEING COMMERCIAL AIRCRAFT, EVERETT, WA (07/2010- 12/2011) Contract Employee
Commercial aircraft designs and manufactures aircraft for domestic and international markets.
Project Engineering Planning
• Responsible for test integration department project plan, task definition, and resource scheduling for composite structural airframe panels
• Requirements definition and specification development
• Responsible for tracking projects through earned value management system
• New work package detailed WBS. resource loaded schedules, baseline schedules, and budgets
• Management reports and power point presentations
• Coordinate cross-functional teams consisting of structural analysis, procurement, systems eng, drafting, integration, and change control
GENERAL DYNAMICS AMPHIBIOUS SYSTEMS, WOODBRIDGE, VA (4/2008-7/09) Contract Employee
Amphibious system designs and manufactures amphibious combat systems.
Project Engineering Planning
• Responsible for the Vetronics department project plan, task definition, and resource scheduling
• Integration of electrical design engineering and cable routing using PTC Routed Systems Designer(RSD) and Pro Cable
• Manage the department EVMS and integrated master schedule
• Design and analysis of mounting assemblies and mechanisms
• Coordinate, track, and support prototype builds
• Requirements definition and specification development
• Coordinate cross-functional teams consisting of structural analysis, electrical and cable routing, logistics, procurement, systems eng, drafting, integration and change control
• Responsible for Geometric Dimensioning, drawing checking, and tolerance stack analysis of component assemblies
• Component packaging and large assembly product management
GENERAL DYNAMICS LAND SYSTEMS, STERLING HEIGHTS, MI (9/2004-5/2006) Contract Employee
Land Systems designs, manufactures and supports land and amphibious combat systems for the U.S. Army, the U.S. Marine Corps and allied nations.
Senior Project Engineer
• Coordinate cross-functional teams consisting of structural analysis, electrical and cable routing, logistics, procurement, systems eng, drafting, integration and change control
• Coordinate, track, and support prototype builds
• Build schedules in Microsoft project, monitor, control, and report progress
• Responsible for tracking projects through earned value management system
• Cost Account Manager (CAM) responsible for cost and schedule reporting for Department
FEDERAL APD INC., NOVI, MICHIGAN (7/2002-9/2004) Full-Time Employee
A Michigan based manufacturer of advanced parking devices for public and private installations. FAPD is a division of Federal Signal Corporation.
Mechanical Project Supervisor
• Supervise two CAD designers and three system engineering designers
• Project Management and Department planning
• Responsible for all mechanical projects in company
• Lead cross-functional product development team from all areas of the company
• Employee performance evaluation, mentoring, and teambuilding
DELPHI AUTOMOTIVE SYSTEMS, TROY, MICHIGAN (11/1995 - 4/2000) Full-Time Employee
A tier one global supplier of automotive components and parts – formerly a division of General Motors Corporation working at Saginaw Steering Systems in advanced product design.
Lead Project Engineer
• Leader of system integration team for electric power steering (EPS)
• Leader product development team that designed and delivered lightweight composite steering columns and gear housings
• Lead for FEA on components to refine packaging design for (EPS)
• Lead of cost savings initiative team that implemented $200,0000 cost savings
ENGINEERING EXPERIENCE
NORTHROP GRUMMAN MISSION SYSTEMS, SAN DIEGO, CA (12/2009-7/2010) Contract Employee
NG Mission Systems designs and develops airborne, shipboard & ground intelligence, sensors, computers, and command and control networks for US and Allied nations.
Project Engineer-Global Hawk Airborne Communications Network
• Design and analysis of mounting assemblies, antennas, and mechanisms
• Coordinate, track, and support prototype builds for airframe assembly
• Responsible for Geometric Dimensioning, drawing checking, and tolerance stack analysis of payload assemblies on airframe assembly.
• Component packaging and large assembly product management
• Vibration analysis and testing of payload assemblies and of airframe components
• Cable and harness assembly routing, design and mechanical drawings
Project Engineer-Business Jet Airborne Communications Network
• Convert design from military application to commercial FAA certified design
• Design and analysis of mounting assemblies and mechanisms for airframe assembly
• Pro-e and Solidworks drawing and product data documentation and drawing checking
• Generation of CAD procedures and product requirements documents
• Solidworks and Pro-E team training
AMERICAN PANEL CORPORATION, ALPHARETTA, GA (11/2007 – 2/2008) Contract Employee
American panel supplies high performance flat panel modules for airborne, shipboard & ground applications and provides high volume, custom consumer applications.
Project Engineer F-22 Avionics Display
• Design display panel housing and final assembly mounting
• Design of led back light assembly
• Mechanical packaging of circuit card assemblies
• Button and human factors layout of switches
• Tolerance analysis and GD&T and drawing checking
• Release of products for manufacturing
• Pro-e Wildfire 3 and 4
SWALES AEROSPACE INC, PASADENA, CA (04/2007-10/2007) Contract Employee
Swales provides services for study, design, development, fabrication, integration, testing, verification, and operation of space flight as well as ground system hardware and software.
Senior Project Engineer
• Electronic component packaging and mechanical product design for NASA mission to Mars
• Extensive use of Solidworks and Pro-E for mechanical design
• Responsible for Geometric Dimensioning drawing checking and tolerance stacks of assemblies
• Cosmos FEA Analysis
• CATIA V5
• Design of ratchet tool for in space repair of damaged communications satellite
DATAPATH INC, DULUTH, GA (11/2006-2/2007) Contract Employee
DataPath specializes in custom satellite earth terminals and network solutions for governments and businesses.
Senior Project Engineer
• Design and analysis of mounting assemblies for military communications trailer
• Coordinate, track, and support prototype builds
• Requirements definition and specification development
• Use of Solidworks CAD program & DBWorks Product Data manager for concepts, design and release
• Use of Cosmos for FEA design and analysis
• Redesign of sub-assembly saving $300,000
BAE SYSTEMS, TRIANGLE, VA (7/2006-11/2006) Contract Employee
BAE Systems is an international company that designs and manufactures commercial and defense systems for air, land, and sea. Triangle, VA designs and maintains the Amphibious Assault vehicle.
Senior Project Engineer
• Responsible for the design and analysis of interior & exterior component mounting assemblies and mechanisms
• Coordinate, track, and support prototype builds
• Design maintenance and repair components, assemblies and installation instructions
• Requirements definition and specification development
• Use of Pro/Engineer CAD program (2000i and Wildfire) and Autodesk Inventor for concepts, design and release
GENERAL DYNAMICS LAND SYSTEMS, STERLING HEIGHTS, MI (9/2004-5/2006) Contract Employee
Land Systems designs, manufactures and supports land and amphibious combat systems for the U.S. Army, the U.S. Marine Corps and allied nations.
Senior Project Engineer
• Responsible for the design and analysis of interior component mounting assemblies.
• Design and analysis of mechanisms using Pro/Mechanica and Pro/Mechanism
• Requirements definition and specification development
• Use of Pro/Engineer CAD program (2000i and Wildfire) for concepts, design and release in Intralink
• In depth use of pro-e modeling, assembly, sheet metal, and detail
• In depth use of Pro-e mechchanica/mechanism for vibration and dynamic analysis
FEDERAL APD INC., NOVI, MICHIGAN (7/2002-9/2004) Full-Time Employee
A Michigan based manufacturer of advanced parking devices for public and private installations. FAPD is a division of Federal Signal Corporation.
Senior Project Engineer
• Responsible for complete design of mechanical devices for $35M airport project
• Use of Solidworks CAD program for concepts and initial designs
• Generate system engineering design and drawings
• Generate concepts and design alternatives
• Design and analysis of complete mechanical devices including gears, belts, pulleys
• Design electromechanical devices that integrate motors, circuit boards, connectors, and cabling
• Design of mechanical and electromechanical locking systems
• Geometric dimensioning and tolerance stacks
• Check and approve CAD drawings
• Lead cross-functional product development team from all areas of the company
• Responsible for product testing and test coordination
• Received UL and ETL approval for new products
• Use of Cosmos FEA for component design and analysis
• Implemented $450,000 annual cost savings through product redesigns and material changes
VISTEON CORPORATION, DEARBORN, MICHIGAN (4/2000 – 4/2001) Full-Time Employee
A tier one global supplier of automotive components and parts – formerly an enterprise of Ford Motor Company assigned to Fuel Storage & Delivery Systems SBU.
Project Engineer
• Responsible for test plans and testing coordination for electric fuel pumps (DVP&R)
• Warranty analysis of fuel pumps returned from field
• Provide engineering support and solutions for manufacturing problems
• Design for Manufacturing and Assembly analysis
• Participated in Six Sigma design and continuous improvement projects team implemented $300,000 savings
• Mechanical design and packaging for fuel pump components
• Drawing review and release for fuel pumps
• Use of Pro-Engineer (Pro/E) for concepts and initial designs
DELPHI AUTOMOTIVE SYSTEMS, TROY, MICHIGAN (11/1995 - 4/2000) Full-Time Employee
A tier one global supplier of automotive components and parts – formerly a division of General Motors Corporation working at Saginaw Steering Systems in advanced product design.
Project Engineer
• Helped customer perform FEA on components to refine packaging design for (EPS)
• Responsible for test plans and testing coordination for electric power steering with customer
• Design of mechanical components, mechanisms, and devices and Product & component packaging
• Prototype product build coordinator and mechanical design of fixtures and mechanical test equipment
• Bill of material modification, generation, correction, and release
• CAD coordinator responsible for drawing checking and engineering release of drawings
• In depth use of Unigraphics V10 through NX1
• Cost savings initiative team implemented $200,0000 cost savings
Contact this candidate