Automation Engineer
Resume:
Mohammed Shariful Islam
**-** **** ******, ********, NY 11385
Phone: 404-***-****
Email: *********@*****.***
Professional Experience
Independent Engineering Consultant
Siemens S5 to S7 Conversion project for a Blow Molding
Machine in Bangladesh.
Boiler Power Plant Automation Project, Abdul Monem, Coca Cola Bottling
Plant, Dhaka, Bangladesh.
1999-2000
Plant Electrical Engineer
Vetrotex-Certainteed. Wichita Falls, TX
1. Modification of industrial machine designing. Instrument Controls using Allen Bradley and Siemens PLCs, small circuit designing, AC/DC frequency drives and motor controls. HMI/SCADA with WinCC and Wonderware. Complex machine networking using DH+, Ethernet and Profibus networks.
2. New project budget and management. Training and assigning technicians with new equipment troubleshooting.
2000-2009
Field Engineer/ Project Engineer/ Project Manager: Automation Control Systems
Siemens Energy & Automation Inc. Alpharetta, GA 30005
PROJECTS:
2008-2009: Chevron Refinery Plant, Gulf Port, MS
Bucket Crane Application: System Design and Programming using Simatic S7 and MasterDrives.
Current Project: YoungQuist, Fort Myers, FL
Oil Drilling Application with Simatic S7 317 CPU with SINAMICS S120 Drives.
September 2007 – January 2009 Exxon Mobil, Lagrange, GA.
Lead Project Engineer: Instrumentation and Controls System Upgrade for Plastic Extrusion and Thin Film Manufacturing Process. Also, Integration of a new Corona Treater System to the existing line.
April 2007 – August 2007 Mittal Steel Mill, Trinidad.
Bucket Crane Application with S7-300 and MasterDrives.
March 2007 – April 2007 City of Orlando Water Distribution System, Orlando, FL.
Utility Power Switching Mechanism for High Voltage Pump with Simatic S7 and MasterDrives.
October 2006 - February 2007 Ethicon Inc. a Johnson&Johnson company at, Cornelia, GA
Design and Program the HMI using the iFIX and XLReporter for data acquisition for this pharmaceutical extrusion process following the FDA regulations.
May 2006 – September 2006 Fiber Vision, Athens, GA
Lead Project Engineer position designing and programming the system upgrade of the Fiber Extrusion process using the S7-400 PLC Hardware, WinCCFlex for Operator Interface OP-270, PCS7 for SCADA and Simatic Manager Programming components such as S7, S7 Graph, CFC and SFC.
MicroMaster Drives: MM420, MM430 and MM440 Motor-Drive tuning, parameterize and programming the communication interface for the SEND and RECEIVE functions in the Simatic S7 PLC.
April – May 2006 IS International, Atlanta, GA
Training Lab Setup for DeviceNet network between AB PLCs with SST interface to the Siemens DeviceNet I/O interfaces and preparing the report for the Instructors for Siemens internal training.
February – March 2006 Hansgrohe Inc. Alpharetta, GA
S7/ S7-Graph/ ProTool Programming modification of the assembly line Shower Heads.
November 2006 Queen Zenobia Shipping Company, Statin Island, NY
S5 programming and Troubleshooting the Compression Chamber of the Ship.
July 2006 Delta Plastics, Stuttgart, AR
S7 Programming and Troubleshooting
May 2006 DOW Chemical, Houston, TX
S5 Programming & Troubleshooting
May 2006 Hydro Rock, Naples, FL
S5 PLC programming and troubleshooting with MicroMaster Drive programming
March 2006 ExxonMobil, Lagrange, GA
S5 Programming & Troubleshooting
February 2006 Georgia Pacific, Rincon, GA
S5 Programming & Troubleshooting
February 2006 Cariad Cargo Ship
S5 Programming & Troubleshooting
December 2005-January 2006 Loudon, TN WWTP
Commissioning the installation and programming S7 for the Switch Gear System of the Loudon, TN Waste Water Treatment Plant.
November - December 2005 US Navy, Jacksonville, FL
Programming S7 for the Engine Control System and Sea Trials of a Preposition Ship “Lt. Harry Martin” of US Navy Seal of Commands.
October 2005 DOW Chemicals, Houston, TX
S5 Programming Troubleshooting
September 2005 St. Lucie Water Utility Services, St. Lucie, FL
Commissioning the new MCC installation.
June 2005- August 2005 Oregon Steel Mills, Portland, OR
Consulting position for Siemens Automation Design for 80 Feet Pipe Manufacturing for Oil Transport applications. Coordinated the design modifications between Oregon Steel Mills and the Chinese OEM.
May 2005 Park Industries Inc., St. Cloud, MN
Siemens Simatic WinAC with Panel PC670 system for Stone Cutting Saw machine troubleshooting job.
May 2005 Mesh Engineering Inc., Alpharetta, GA 30004
RS-Logix5000 and RS-Logix500 PLC programming contract project with Pactive Manufacturing Plant, Conyers, GA.
September 2004-December 2004 Siemens Energy & Automation, Alpharetta, GA 30005
CHINA TISCO Steel Mill Project: Filtration and Hydraulic system programming for Steel Rolling Mill using Simatic S7 and S7 Graph. Project was coordinated by Nicklas &Partner, Inc. and Siemens Energy & Automation, Alpharetta, GA.
September 2000- May 2004 Siemens Energy & Automation, Alpharetta, GA 30005
Commissioning Engineer
Providing customer support in all areas of automation controls and instrumentation.
Projects:
Graphic Packaging, Lawrenceburg, TN: Packaging application with Simatic S7 400 system, Profibus and Ethernet communications.
ATEX, Inc., Gainesville, GA: Fabric industry with Simatic S7 300 & S7 400 system, Profibus and MPI communications, ProTool Pro Panels.
Andritz, Ltd., GA: Crane application with Simatic S7 300 system and Motion Control drives.
Lemforder Corp., Anderson, SC: BMW manufacturing plant, S7 300 & S7 400 system, Ethernet communications with OPC client/server application.
Georgia Foam, Inc., Gainesville, GA: Foam packaging application with S7 300 system.
Steyr Powertrain, Inc., Norcross, GA: GM manufacturing plant, S7 300 system.
Nestle USA, IA: Involved reverse engineering skills to understand the production method of a complex packaging system. Due to the bankruptcy of the German OEM, the installation of the packaging equipments, the software programming and the machine communications were incomplete and unstable. I took the lead engineering position, coordinating and working together with multiple engineering contractors. My responsibilities include, configuring the Siemens simatic hardwares, which include the Drives and the S7 PLC controllers, Simatic STEP 7 programming plc and establishing communications with the Intellution HMI.
Siemens VDO Automotive Corp., Blythewood, SC: Established a Data Management System using the User Archive in WinCC HMI. Installing a WinCC Redundant System for data security.
ZUA Autoparts, Oakwood, GA: Engineering the assembly line for Stearing Gears. Established a data collection system on a OPC server via Ethernet. Programming and configuring the RFID tag readers in S7. Hardware.
Configuration and STEP7 programming for 10 CPU 315-2DP stations. HMI configuration for thr OP 27 and MP270 Panels using the ProTool.
May 2001- March 2003 Project at Framatome ANP, Alpharetta, GA: Developing a Flux Mapping Monitoring System of a Nuclear Reactor for Callaway Plant using the STEP7 programming and HMI visualization using the WinCC software.
Education
1994-1998 Michigan Tech University, Houghton, MI
Bachelor of Science in Electrical Engineering
2008- 2009 Georgia State University, Atlanta, GA
Masters of Business Administration (MBA)
Certification
S7 Programming I, S7 Programming II, PCS7, S7 Ethernet, S7 Profibus, WinCC Programming, WinCC Scripting, RSLOGIX5, AutoCAD 2000, Motion Control Drives, Sinamics S120.
Application and Programming Expertise
Applications: Microsoft Project, Word, Excel, Power Point, Web Designing
Programming: Matlab, Simulink, PSPICE, C++, Unix, Sybase, SQL.
Contact this candidate