Administrative Assistant Construction
Resume:
Ingrid Dean
Baytown Tx *****
Objective: To obtain a challenging position in the engineering field utilizing my education and experience in the construction industry and also as a small business owner.
Employment Experience
Demar Services, Houston, Texas – April 2011 – September 2011
Pipe Designer
Produced construction iso’s, 3D and, detail drawings utilizing Cad Worx. Performed field walk downs gathering project information. Helped create and maintain drawing and line lists. Provided document control to projects. Created specs for projects in the Cad Worx program. Checked drawings. Maintained and updated client P&ID’s.
All Tech Inspection Services, Houston, Texas – May 2010 – Present
Pipe Designer
Produce inspection ISO’s, vessel and, mechanical drawings from field data with the use of AutoCAD. Revise existing drawings as needed for Valero Houston. Input TML’s data utilizing PCMS.
Contractor/owner-Lone Star CAD Services for Diversified Projects Inc., Spring, Texas – May 2009 – June 2009
Pipe Designer/checker
Responsible for producing and scrubbing construction ISO’s and P&ID’s utilizing CAD Worx and Flex P&ID. Assist piping lead by: checking drawings for accuracy, thoroughness and, compliance to standards. Compile bill of materials for drawings in accordance of the specifications per client. (This was to be a two week project that lasted longer.)
Ventech Engineering, Pasadena, Texas – August 2008 – November 2008
Pipe Drafter/designer/checker-Engineering Dept. Document Control
Responsible for maintaining/scrubbing construction ISO’s and P&ID’s utilizing CAD Worx and Flex P&ID. Maintain Piping Department documents and drawing files. Check drawings for accuracy, thoroughness and, compliance to standards. Helped design complete unit drawings (P&ID’s, construction iso’s, plot and plan drawings.) Complete bill of materials on all drawings.
Taylor & Hill Engineering, Houston, Texas – November 2007 – August 2008
Pipe Designer
Ineos - Chocolate Bayou – maintaining and producing construction ISO’s utilizing Documentum, CAD overlay and, CADPipe. Project walk downs to determine best routing for pipe and placement of valves, fittings and, instrumentation to be replaced or newly installed. Prepare work packages for project engineer. Take field measurements for project. Provide material take off and specifications for drawings. Complete bill of materials on all drawings.
Home office - Utilizing FlexCAD and CADworx to produce construction ISO’s and skid drawings from field data (sketches, photos and, measurements.) Revise existing drawings as needed. Do as-built drawings for clients. Completed red lined drawings from engineers. Produce ISO’s for weld mapping. Complete bill of materials on all drawings. Occasionally check drawings for other designers and do walk downs for clients. Do technical writing as needed for Manager of Engineering Operations.
All Tech Inspection Services, Pasadena, Texas – June 2007 – November 2007
Pipe Designer
Utilizing AutoCAD to produce inspection ISO’s, vessel and, mechanical drawings from field data. Revise existing drawings as needed for Pasadena Refining Systems Inc.J&W Services, Baytown, Texas – October 2006 – October 2007
Owner
Did work projections, billing and, scheduling utilizing Clip 2006. Landscape design using Corel Photo-Paint. Document control and quarterly taxes. Marketing for J&W Services.
CDI Engineering, La Port, Texas – September 2004 – October 2006
Pipe Designer
Utilizing AutoCAD and Ultrapipe produced ISO’s, vessel and, mechanical drawings for the Inspection department at the Bay Area Lyondell facility.
PetroSpect Industrial Services, Chocolate Bayou, Texas - February 2004 – July 2004
Field Drafter
Take circuited P&ID’s, walk them down in the field and produce isometric field sketches to be used to produce CAD isometric drawings. Produce work packages for piping department. Assisted in moderate document control at Joe D. Hughes/KBR Pipe Fabrication Yard.
Reliable Inspection, Baytown, Texas - September 2003 – February 2004
Designer/Drafter
Aided electrical engineers and the I & E department maintenance group of the Natural Gas Odorizing Facility in producing plant P&ID’s and loop components utilizing AutoCAD. Produced data sheets for instruments. Also provided document control support for project.
AltairStrickland, Texas City, Texas - December 2002 – January 2003
Designer/Drafter
Aided project engineer in the design of lift plans and utilized AutoCAD to produce drawings for lift packages.
Cooperheat – MQS, Houston, Texas - February 2002 – November 2002
Technical Report Writer/Drafter
Produced inspection ISO’s for pipeline inspection reports using AutoCAD. Produced mechanical and vessel drawings for inspection Reports utilizing AutoCAD. Lead drafter on El Paso Oil projects - Set up and maintained filing system and drawing list for El Paso Oil projects. Converted raw data from the field into reports for various clients.
Paragon Engineering, Houston, Texas - June 2001 – December 2001
Design Drafter/Mapper
Produced alignment sheets and road crossing drawings utilizing AutoCAD and Land Development. Produced and maintained work orders. Aided engineers in the design of pipelines and produced construction drawings. Created and maintained drawing list for Pipeline Department and clients. Revised existing drawings.
The Houston Chronicle, Houston, Texas - July 2000 – June 2001
Design Draftsman-Engineering and Plant Maintenance Group
Aided engineers by producing construction drawings using AutoCAD. Aided engineers and architect by updating and revising mechanical, piping, electrical and, architectural as-built drawings. Took field sketches and measurements.
HMT/Iteq Inspection, Houston, Texas - February 1999 – July 2000
Technical Report Writer
Converted raw data from the field into technical reports which included CAD drawings. Produce CAD iso drawings for inspection reports. Produced tank and vessel drawings for reports. Produced offshore rig drawings for reports utilizing field data.
Brazos M & E, Baytown, Texas - May 1997 – August 1997
Expeditor/Pipe Fitter Helper
KCI Constructors, Baytown, Texas - March 1996 – May 1997
Warehouse Clerk/Material Control Clerk
John Brown E & C, La Porte, Texas - January 1995 – August 1995
Warehouse Clerk
Cagle Services, Pasadena, Texas– June 1993 – August 1993
Time Keeper/Administrative Assistant
John Brown E & C, Pasadena, Texas – February 1993 – May 1993
Document Control/Administrative Assistant
Belmont Construction, Channelview, Texas - October 1992 – December 1992
Welder Helper
John Brown E & C, Houston, Texas - October 1991 – December 1991
Pipe Clerk
Brown & Root E & C, Houston, Texas – July 1989 – August 1991
Engineering Clerk/Document Control Clerk
Education
Lee College, Baytown Campus, Classes taken 1997 – 2000
• Topics of instruction include but not limited to:
Technical Drafting-basic manual/board drafting
Basic Computer Aided Drafting
Special Topics in Mechanical Drafting-CADII
Special Topics in Structural Drafting
Special Topics in Pipe Drafting
Menu Customization and 3D Modeling-Intermediate CAD
CAD Pipe Drafting
Material take-offs
Strengths of Materials
Shooting elevations and taking field measurements
Computer Software
• AutoCAD R12, R14, 2000-2010
• CADworx – 3-D
• CADPipe
• FlexCAD
• AutoCAD Land Development & Map
• AutoSketch R6
• Rebis Auto Plant Design 97/ProPipe
• Windows; Excel, Word, PowerPoint, and Access
• U-Pipe
• PCMS
Memberships
• Society of Piping Engineers and Designers
Contact this candidate