Sr. E.I&C or F&G Designer
Resume:
Wayne E. Darrell
Anchorage, AK 99517
To whom it may concern,
I am interested in any Sr. E.I&C or F&G design position you may be looking to fill now or in the near future. I am ; in good health; have an excellent attendance and work ethics record and have only one vice-my Grandchildren. I would like to thank you, in advance, for any consideration you may give me and my skills.
Cordially
Wayne Darrell
June 27, 2012
Personal Resume of
Wayne E. Darrell
Objective:
Sr. EI&C Design Position
Experience Overview
Although my forte is Electrical Design, over the course of my 35 year designer career, I have been fortunate enough to be tasked with a myriad of multi-discipline drafting assignments, such as those outlined below.
Architectural
Produce detailed floor plans from field measurements of clients’ un-documented facilities.
Produce building plan views showing detailed production lines with equipment reference designations and their locations relative to building columns.
Area lighting requirements based on client foot candle specifications.
Create topographical drawings required for Wind Turbine projects to show tower locations, tower lay-down and assembly areas, turbine tower foundations details etc.
Design and draw Remote Control Skid plans for Wind Turbine Controls. Including control Produce detailed building/shed layouts and construction details.
Electrical
All phases of Control, PLC, Remote I/O, Terminal/Junction panel design [i.e.]
Enclosure type, size and NEMA or IEC specifications or custom enclosure designing when necessary, including multiple-break operator consoles.
External/Internal Equipment Arrangements.
Cutout locations and details.
Calculations to determine circuit loading, and protection, conductor and terminal block sizes, de-rating factors such as ambient temperature, length of run etc.
One Line, Three Line and Power Distribution diagrams for Sub-Stations, Industrial Plants and Alternative Energy Facilities.
Elementary, Schematic and Point-To-Point wiring diagrams.
Discrete, Digital/Analog I/O and P&ID’s
Field wiring details for MCC buckets, Overhead Buss ducts, Sub-Stations, Local Motor Disconnects, Wind Turbine & Alternative Energy Facilities.
Cable & Conduit schedules dictating size, fill and circuits carried.
Specification and requisitioning of instrumentation and controls as needed.
Mechanical
Produce detailed 2D & 3D fabrication drawings of machined parts and miscellaneous brackets and braces with tolerances, standard or X,Y ordinate dimensioning.
Produce detailed fabrication drawings of machined parts with tolerances, standard or X-Y ordinate and some datum dimensioning.
Produce detailed fabrication drawings from reverse engineering of parts.
Design jigs, frames racks etc. required to field install Wind Turbine power isolation and/or disconnection equipment.
Piping & Pneumatic
Produce detailed 3D fabrication drawings of Header Systems, support brackets, hangers and braces with tolerances, standard or X-Y ordinate and some datum dimensioning.
Specification and requisitioning of instrumentation and control components such as transmitters, solenoid valves, flanges, fittings, static & electronic gages etc. required to fabricate engine cooling supply and return header line assemblies.
Produce detailed 2&3D fabrication drawings of generator engine cooling systems, support brackets, hangers and braces utilizing AutoCAD 2010s’ built-in 3D Modeling capabilities.
Field Experience
I have developed design drawings from sketches and photographs I produced on project site “walk-downs”.
I have produced clients’ facilities documentation, by gathering the necessary data and in-putting it into a portable computer, while on site.
I have personally designed, monitored production and shipping, installed, connected, tested and assisted in “Start-Up”, of production lines and controls at client sites.
I have designed, monitored production and shipping, scheduled and supervised trades personnel for the installation of equipment and controls at new and up-graded production facilities.
Areas Of Application
I have been fortunate to have the pleasure of working at a diversity of industries such as: air quality controls design & production, candy production, building material production, CRT tube production, large bore engine natural gas injection systems, crude oil production facilities and Wind Turbine alternative energy facilities.
Employment History
October 2011 – May 2012
NANAWorleyParsons, LLC.
Fire & Gas Business Unit
3700 Centerpoint Dr.
Anchorage, AK 99503
Company Profile:
NANAWorleyParsons, LLC is a ‘Turn-Key’ Engineering firm located in Anchorage Alaska. Its’ mission is to furnish high quality professional services to the Oil & Gas Industry production facilities on the North Slope of Alaska.
Primary Function: Agency Senior Electrical Designer
Responsible for the following duties:
The creation of detailed CAD documentation packages required to complete the project with either new or revised documents using AutoCAD 2006 or 2005 Raster Design. (e.g.) Enclosure Details, Interior Panel Layouts, Schematic Diagrams, Interconnect Wiring Diagrams, Instrument Loop Diagrams and all miscellaneous documentation as needed. This required ‘Demolition’ and ‘Design/Construction’ copies of each document.
Research, retrieve and sign-out [WIP] all existing documents required by the project. This required the proficient use of Documentum, the clients’ on-line document control system.
The creation of a Scope Of Work [SOW] document, to provide a detailed outline of all tasks required during each phase of the project from “For-Bid” to “For-Construction” issued document packages.
The creation of detailed equipment requisitions [EMR’s] w/detailed BOM’s using standard forms. This task often required the research, selection and data entry of various new parts or materials to meet the design requirements.
Ensure compliance with all customer supplied specifications and all latest editions of NEMA C/D, NEC, NFPA and BP standards.
Customer liaison as required, for project requirements clarifications and/or exceptions.
Calculations to determine feeder sizes, circuit and panel loads, circuit interrupt sizing to ensure compliance with the latest edition of the and NEC and NFPA Codes.
Schedule, supervise and check the work of assigned subordinate designers and drafters.
Fabrication inspections and shop testing observation and verification as required.
All other duties that may be required for project execution.
April 2011 - September 2011
Marsh Creek LLC
2000 88Th Ave. Suite 100
Anchorage, AK 99507
Company Profile:
Marsh Creek, LLC (Marsh Creek), is a Small Business Administration certified 8(a) ANC company jointly owned by Kaktovik Inupiat Corporation and SolstenXP. The company began as Marsh Creek Government Services in January 2004, and in June 2005, the name was changed to Marsh Creek, LLC with permanent operations in Anchorage, Alaska; Roseville, California; Honolulu, Hawaii; Heber City, Utah; and McLean, Virginia. We also maintain project offices in Deadhorse and Kaktovik, Alaska.
Primary Function: Senior Electrical Designer
Responsible for the following duties:
The creation of detailed CAD documentation packages required to complete the project with either new or revised documents using AutoCAD 2010 or 2010 Raster Design. (e.g.) Enclosure Details, Interior Panel Layouts, Schematic Diagrams, Interconnect Wiring Diagrams, Instrument Loop Diagrams and all miscellaneous documentation as needed for Wind Turbine and/or BP projects. BP projects also required:
• ‘Demolition’ and ‘Design/Construction’ copies of each document.
• Research, retrieve and sign-out [WIP] all existing documents required by the project. This required the proficient use of Documentum, the clients’ on-line document control system.
• The creation of a Scope Of Work [SOW] document, to provide a detailed outline of all tasks required during each phase of the project from “For-Bid” to “For-Construction” issued document packages.
• The creation of detailed equipment requisitions [EMR’s] w/detailed BOM’s using standard forms. This task often required the research, selection and data entry of various new parts or materials to meet the design requirements.
All projects required the assurance of compliance with all customer supplied specifications and all latest editions of NEMA C/D, NEC, NFPA.
October 2009 – April 2011
Self-Employed
Supplying design/drafting services to
Marsh Creek LLC
2000 88Th Ave. Suite 100
Anchorage, AK 99507
Company Profile:
Marsh Creek, LLC (Marsh Creek), is a Small Business Administration certified 8(a) ANC company jointly owned by Kaktovik Inupiat Corporation and SolstenXP. The company began as Marsh Creek Government Services in January 2004, and in June 2005, the name was changed to Marsh Creek, LLC with permanent operations in Anchorage, Alaska; Roseville, California; Honolulu, Hawaii; Heber City, Utah; and McLean, Virginia. We also maintain project offices in Deadhorse and Kaktovik, Alaska.
Primary Function: Senior Electrical Designer
Responsible for the following duties:
The creation of detailed CAD documentation packages required to complete the project with either new or revised documents using AutoCAD 2010 or 2010 Raster Design. (e.g.) Enclosure Details, Interior Panel Layouts, Schematic Diagrams, Interconnect Wiring Diagrams, Instrument Loop Diagrams and all miscellaneous documentation as needed for Wind Turbine and/or BP projects. BP projects also required:
• ‘Demolition’ and ‘Design/Construction’ copies of each document.
• Research, retrieve and sign-out [WIP] all existing documents required by the project. This required the proficient use of Documentum, the clients’ on-line document control system.
• The creation of a Scope Of Work [SOW] document, to provide a detailed outline of all tasks required during each phase of the project from “For-Bid” to “For-Construction” issued document packages.
• The creation of detailed equipment requisitions [EMR’s] w/detailed BOM’s using standard forms. This task often required the research, selection and data entry of various new parts or materials to meet the design requirements.
All projects required the assurance of compliance with all customer supplied specifications and all latest editions of NEMA C/D, NEC, NFPA.
April 2008 – April-2009
NANAWorleyParsons, LLC. -
700 G Street
Anchorage, AK 99503
Company Profile:
NANAWorleyParsons, LLC is a ‘Turn-Key’ Engineering firm located in Anchorage Alaska. Its’ mission is to furnish high quality professional services to the Oil & Gas Industry production facilities on the North Slope of Alaska.
Primary Function: Staff Senior Electrical Designer
Responsible for the following duties:
The creation of detailed CAD documentation packages required to complete the project with either new or revised documents using AutoCAD 2006 or 2005 Raster Design. (e.g.) Enclosure Details, Interior Panel Layouts, Schematic Diagrams, Interconnect Wiring Diagrams, Instrument Loop Diagrams and all miscellaneous documentation as needed. This required ‘Demolition’ and ‘Design/Construction’ copies of each document.
Research, retrieve and sign-out [WIP] all existing documents required by the project. This required the proficient use of Documentum, the clients’ on-line document control system.
The creation of a Scope Of Work [SOW] document, to provide a detailed outline of all tasks required during each phase of the project from “For-Bid” to “For-Construction” issued document packages.
The creation of detailed equipment requisitions [EMR’s] w/detailed BOM’s using standard forms. This task often required the research, selection and data entry of various new parts or materials to meet the design requirements.
Ensure compliance with all customer supplied specifications and all latest editions of NEMA C/D, NEC, NFPA and BP standards.
Customer liaison as required, for project requirements clarifications and/or exceptions.
Calculations to determine feeder sizes, circuit and panel loads, circuit interrupt sizing to ensure compliance with the latest edition of the and NEC and NFPA Codes.
Schedule, supervise and check the work of assigned subordinate designers and drafters.
Fabrication inspections and shop testing observation and verification as required.
All other duties that may be required for project execution.
April 2007 – April-2008
Arctic Slope Regional Corp. -
Arctic Energy Services
Anchorage, AK 99503
Company Profile:
Arctic Slope Regional Corp/Arctic Energy Services (ASRC/AES) is a ‘Turn-Key’ Engineering firm located in Anchorage Alaska. Its’ mission is to furnish high quality professional services to the Oil & Gas Industry production facilities on the North Slope of Alaska.
Primary Function: Staff Senior Electrical Designer
Responsible for the following duties:
The creation of detailed CAD documentation packages required to complete the project with either new or revised documents using AutoCAD 2006 or 2005 Raster Design. (e.g.) Enclosure Details, Interior Panel Layouts, Schematic Diagrams, Interconnect Wiring Diagrams, Instrument Loop Diagrams and all miscellaneous documentation as needed. This required ‘Demolition’ and ‘Design/Construction’ copies of each document.
Research, retrieve and sign-out [WIP] all existing documents required by the project. This required the proficient use of Documentum, the clients’ on-line document control system.
The creation of a Scope Of Work [SOW] document, to provide a detailed outline of all tasks required during each phase of the project from “For-Bid” to “For-Construction” issued document packages.
Previous Career Highlights
Digicon Inc. (2000-2005 Now Defunct)
Craley, PA 17312
Primary Function: Senior Electrical Designer
Responsible for the generation of detailed AutoCAD 2D & 3D drawings of the companies’ natural gas Electronic Fuel Injection Systems controllers.
Secondary Function: Mechanical Drafter
Responsible for the generation of detailed AutoCAD 2D & 3D drawings of the companies’ natural gas SSFI(Supersonic Fuel Injection) nozzles and injector parts manufactured in-house.
Buell Engineering, Division of Envirotech (1978-1981)
Lebanon, PA 17042
Primary Function: Electrical Mfg. Sr. Electrical Designer and Engineering Liaison.
Company Profile: Turn-Key Engineering and Producer of air quality controls for the Power Production Industry utilizing coal as their energy source. Electrostatic Precipitators, Bag Houses, Wet & Dry Flue Gas Scrubbers and Pulse Jet Dust Collectors.
GE Environmental Services Inc. (1981-1988 formerly Buell Eng., Div. of Envirotech)
Lebanon, PA 17042
Primary Function: Supervisor of Electrical Manufacturing Design & Drafting Department.
Job Responsibilities: Scheduling and oversight of the designers within the Electrical manufacturing groups’ standard and custom controls department. The majority of design work centered on free standing custom control enclosures and multiple break control consoles, many which incorporated custom engraved and fabricated graphic/mimic sections.
Personal Highlights
I graduated High School in 1967. I enlisted in the US Army in 1968 and was honorably discharged in 1971. I attended a GI Bill sponsored course of study at the Washington Drafting School (Now defunct) between 1970 thru 1971. I entered the civilian employment market at Buell Envirotech in 1972 as an electrical assembler in their electrical manufacturing shop. In 1976 I was appointed as the shops’ Detailer\Engineering Liaison. I bid on and succeeded in winning an Electrical Designer position in 1978. An acquisition by G.E. in 1981 secured me the position of Supervisor of Electrical Manufacturing Design & Drafting Department with eight designers in my charge. I left GESSI in 1988 to accept a Sr. Electrical Designer position, with the start-up company Project Integration, [now defunct]. The collapse of Project Integration in 1989 lead to my entry into the contract employment arena with United Technical Associates [UTA] as a Sr. Electrical Designer and ended in 2000 when I began at Digicon Inc.
My computer and CAD experience began in 1982 with GE Calma software on mainframe CADD Workstations. In mid 1984 the Manufacturing Manager and I configured and purchased the companys’ first PC based CADD station running AutoCAD Rel. 1.70 and since that time I have used all releases of AutoCAD through and including 2010. I am also proficient with AutoCADs’ Raster Design program. My interest in 3D drafting prompted me to purchase Autodesks’ Inventor8 training package. I have a very good working knowledge of MS Widows thru Windows7; MS Office2010, most standard file support/maintenance programs, e.g. FTP, WinZip etc… and various graphic/image management packages.
References
Rusty Belanger – Nana Worley Parsons
Manager, Fire & Gas Business Unit
*****.********@*****************.***
Michelle Bierbower - Nana Worley Parsons
Supervisor, Fire & Gas Business Unit
********.*********@*****************.***
Robert Harris - Friend
Electrical Engineer -PE
*******@******.***
John Lyons - Marsh Creek LLC
Friend
Alternate Energy Division Manager
****.*****@*************.***
Contact Information
I may be contacted by any of the followings means:
US Mail:
Wayne Darrell
3364 Seppala Dr. Unit-A
Anchorage, AK 99517
Telephone:
Primary: 907-***-****
Secondary: 907-***-**** (Sons’ home)
E-Mail:
***********@***.***
Contact this candidate