Engineer Electrical

Rehmat Ellahi

***, **.**, *-**/*, Islamabad Pakistan Cell: +92 (0-300*******

E-mail: ********@*****.***, *************@*******.*** (Pls drop an email incase cell is not responding)

Professional Profile:

Electrical / Instrumentation and Control Engineer with 11 Years of practical hands on Experience (Asia, Middle East and Africa) Installation, Testing and Commissioning of various projects with Engineering and Production companies in Oil and Gas (Onshore / offshore) both office and site based roles.

Experience: 11 Years

Profile:

As Electrical/ Instrument & Automation Engineer:

As E&I Engineer I have worked on preparation of scope of works (Green Fields & Brown Fields), Load calculations, cable Sizing, cable schedule, cable routing plans, P&IDs, hookup drawings in AutoCAD, BOQ, preparation of Engineering work packs, Cause & Effects Charts, Hazop Studies, Purchase requisitions, Preparation of Tender Documents, Technical Bid Evaluation, Technical queries, procurement, construction, startup of various oil and gas processing facilities including LV and MV Switchgear Panels, MCC expansion, modification, Synchronization of generators, Power Generation and Distribution, wellhead power supplies, Scada Systems. I have also worked on Rotary Equipments including Compressors, Engines, Generators, Caterpillar G3306, G3412,G3512, G3516, D3556, Olympian 100, Perkins Diesel / Gas, Waukesha HP744, Deutz TBG620, Solar Turbines C20/40, Woodword 2301A, 2301D, Controllers like CAT EMCP, Waukesha ESM, DeepSea, Murphy,

Burner Management Controls, Gas Compressors, Refrigeration System, Temperature, Pressure, Flow, Level Indicators/ Transmitters, Switches, Chart Recorders, Fuel Regulators Installation and Calibration, Control / ESDV / Solenoid Valves, Moisture / Hydrocarbon Dew point, H2S, Total Sulphar Analyzers, Radar Tank Gages, Optical Fibers, Multiplexers, Gas Chromatograph, Flow Computers, Fire / Gas Detection Systems.RTUs / PLCs / DCS / SIS, SCADA, DeltaV / Yokogawa DCS programming configuration, Deepsea Controllers, Modbus, TCP/IP, RS 232 / 485, HART, Device Net protocols, LabView, Agilent DAQ system.

Qualification:

B.Sc. Electrical Engineering (University of Engineering & Technology Taxila 2001).

Languages:

English, French, Urdu, Hindi, Arabic

Softwares:

DELTA V YOKOGAWA CITECT, RSLOGIX SIEMENS , OMRON

AutoCAD SAP / EDAM /PDOC ROCLINK8000 MON2000

LABVIEW / VEE PRO CAT Electronic Tech GP PRO / HMI PROFACE / WPL GE RTU

ESP / WAUKESHA VISO / MS PROJECT MS OFFICE Citect SCADA

Electrical Project Coordinator Eni Iraq Jan2012 to date

Preparation and revision of Electrical & instrumentation design, workpacks, compliance of E&I design with Eni standards. Interface with other project disciplines to ensure smooth, reliable and timely flow of data, and information. Preparation of scope of works, bid documents, Technical evaluation of any proposals, Improvements and modification, provide technical assessment relevant to site queries submitted by Contractors.

Electrical & Instrument Engineer BHP Pakistan Jan2011 – Dec 2011

ECRs, MOCs, closeouts, E&I Audits, Follow up Engineering Design with contractors including reviews, comments, suggestions as per company standards, Vendors and Field staff correspondence, construction plans, preparation of handover documents, maintenance plans, maintaining inventory of critical equipment spares, Implementation of changes in PLC, DCS, Turbine Controls as per MOC / Service bulliton from GE and SOLAR, Preparation of Work Packs, equipment installation, vendor mobilization to site, Maintenance/ Modification, GSAP, 1SAP, Webtop.

Instrument & Automation Engineer Eni Congo Jan 2008 – Sep 2010

I worked as Instrument and Automation Engineer with Eni International / Eni Congo for MBoundi and Koukoila Fields (Onshore), Zatchi, Loango, Kitina and Awapoluko (Offshore) Fields responsible for Improvements / Modifications, preparation for scope of work, monitor review, contractor / subcontractors engineering design, construction and commissioning activities, focal point for technical queries, procedures, schedules, drawings, technical clarifications in a closed liaison with other O&M, Production and HSE departments.

1. Installation and Commissioning of Water Injection / Water Treatment system at MBoundi Field (Onshore)

Worked on Allen Bradley SLC 5000, Citect SCADA, ESD, Waukesha Engines HP744, CAT 3516, CAT 3512, CAT Olympian, 08 Water Booster / Injection Pumps, Desaulters, Separators, Degaser, Knockout Drums, Oil Storage Tanks, Oil Export Pumps, Tank Gauging System, Murphy / ESM Control Panels programming configuration, Coarse, Sand / Rotative and Pre-Coated Filters, Deutz Generators, MCC, Field Instrumentation Temp, Pressure, Flow, Control Valves, Regulators

2. FEED for M’Boundi and Kouakouala fields as per HAZOP study (Onshore)

As a team leader I prepared scope of work, followed engineering design & control, kick of meetings, reviews, comments and approval of design documents as AFC complying with company specifications covering cable sizing, equipment specifications, MCC design / layout, control system philosophy, F&D design, Control panels layout, cable routing, Cause and Effects, Fire Fighting system, control system up gradation, Preparation of BOQ for construction, also some civil works like pavement for separators, air coolers, export / booster pumps, heaters, open drain system.

3. Replacement of 6” Pipeline between Koikoila & Mango approximately 3.5Km (Swamp Area)

As Project Team member I followed scope of work, kick of meetings, design verification, approval and supervision of Engineering & construction activities related to Instrumentation & Control and Cathodic Protection System according to company specifications.

4. Commissioning Startup of AwaPaloukou Platform (Offshore)

DELTA V DCS, Sand, Rotary, Coarse Filters, Sea Water Injection, Sea Water Lifting, Gas Compressor for Injection and Compression, Fuel Gas System, Oil Export Pumps, Solar turbines, Flare System, Solair Air Compressor, ESP Baker, ESD panels.

Electrical & Instrument Engineer Tullow Oil Feb 2007 – Jan 2008

5. Engineering, Construction and Commissioning of Sour Gas Processing Plant, Chachar Sindh

Load Calculations, P&ID revision, Control Philosophy, Cable Sizing, Schedules, Logic drawings / schematics, I/Os Calculations, Instrument Loop Drawings, JB drawings, Hookups, FAT (MCC / DCS, design, Control Panels, Cause and Effects, YOKOGAWAS DCS Programming, Modifications, control philosophy, Loop Checks, Synchronization, Switchgear Panels, Generators Selection, TQs to Contractor, ITRs, Progress Reports, Co-ordination with Project and Production Manager.

As a Maintenance Engineer my responsibilities included preparation of plant spares, Maintenance / Schedules, Maintenance of Gensets, Troubleshooting of Switchgear Panel, MCC, DCS Up gradation, Operator / Engineering Work Station, addition of Loops / plant parameters, data backup. Calibration of Metering Equipment with Client (SNGPL). Weekly, Monthly and Yearly Calibration of Instruments, Equipment History Cards, Coordination with vendors and assistance to procurement department for plant spares.

Equipment Involved, five Wellhead Control Panels, Test and Production Separators, Amine Sweet Gas Unit, Glycol Dehydration, Heat Medium Package, Fuel Gas Conditioning, Metering Unit with Flow Computer, Gas Chromatograph, Moisture analyzer, H2S and Total Sulpher Analyzer, DCS, MCC, Instrument Air Package, Incinerator, reverse osmosis Unit, Two Gas CAT3412 and one Diesel D3556 Generator through Synch Operation, Fire and Gas Detectors.

Electrical & Instrument Engineer Petrosin Engineering Oct 2005 – Feb 2007

6. Engineering, Construction and Commissioning of LPG Extraction and Expansion Project at Pindori, (Client POL)

DCS and MCC drawings for vendors fabrication, Load Calculations, Critical and Non Critical Load Management, Gensets Selection, Power and Control Cable Selections, Cable Schedule, I/Os Calculations, Instrument Loop Drawings, Preparation of DCS / HMI Screens according to Client requirements, Co-ordination with Packages Vendors, Preparation of FAT documents for MCC, DCS, and Packages, Synch and Load Sharing Panels, Equipment Installation of Motors / Pumps Installation, Cable Trays, Routing, Instrument Loop Checks, F&D, BOQ, BOM, Control Valves, Solenoid Valves, Calibration, Tubing and DCS, PLCs, Fire and Gas Detection Systems.

Equipment Included was Six Wellhead Control Panels (Baker’s Auto Control panel), Two Gas Gensets , one Diesel Generator, Load Sharing / Synch Controllers, Production and Test Separators, Amine Sweetening Unit, Gas Compressors (Dresser driven by Waukesha Gas Engine), ESD Panel, TEG Dehydration, Instrument Air compressor, Heat Oil Package, Refrigeration Compressors (driven by CAT G3516), Propane Recovery and LPG Extraction, Sour Water Processing, Crude / Water Storage Tanks, SAAB Radar Gauges, Gas Metering by Flow Computer, Gas Chromatograph.

Automation Engineer Creative Automation Aug 2000– Dec 2004

7. Engineering / Construction and Commissioning of Control and Data Acquisition System for Jet Turbine Testing Facility.

I have developed a complete automation and Data Acquisition System for the testing of Turbo Jet Engines, Omron C200HX PLC programming, Visual Basic, C++, Micro Controllers, High Speed Agilent Vee-Pro Data Acquisition System, Serial RS232 / 485 communication between PLC/ HMI/ DAQ / EFC (Electronic Fuel Controller). System involved monitor / control of turbine Speed, Vibration, Load Cells, Pressure, Temperature Thermocouples, Flow Transmitters / Indicators / Gauges, Moisture Analyzers, Panel Designing, Internal and Field Wiring, Solenoids Valves, Instrument Installation / Calibration, Installation, PLC and DAQ programming, Configuration and Troubleshooting, CCTV Installation, Networking, Video Recording / Editing, Fire Detection System and Optical Fibers for complete and Safe Operation of the Plant.

Contact this candidate