Engineer Project

CURRICULUMVITAE

PERSONAL DATA

NAME: NWORIE SUNDAY

DATE OF BIRTH 12TH DECEMBER 1980

PLACE OF BIRTH UJE IGAMUEL ADO L.G.A. BENUE STATE

SEX: MALE

NATIONALITY: NIGERIAN

STATE OF ORIGIN: EBONYI STATE

L.G.A: EZZA NORTH L.G.A

MARITAL STATUS: SINGLE

CONTACT ADDRESS: CHURCH OF GOD MISSION WOJI TOWN, PORT HARCOURT

Passport Number: A01331049

E-MAIL: *********@*****.***

PERMANENT ADDRESS: OMEGE-UMUEZEKOHA, EZZA NORTH, EBONYI C/O MR PAUL NWORIE

PHONE: +234**********

QUALIFICATION OBTAINED WITH DATES

INSTITUTION ATTENDED DATES QUALIFICATION OBTAINED

EBONYI STATE UNIVERSITY, ABAKALIKI 1999 – 2003 B.Sc (INDUSTRIAL PHYSICS/ ELECTRONICS) (SECOND CLASS HONOURS 2.2)

METHODIST HIGH SCHOOL IGUMELA ADO LOCAL GOVERNMENT AREA BENUE STATE. 1992 – 1998 WAEC / SSCE

ST. PAUL PRIMARY SCHOOL

UJEIGUMELA BENUE STATE 1984 – 1990

FIRST SCHOOL LEAVING CERTIFICATE

ENGINEERING EXPERIENCE &CERTIFICATE ACQUIRED & SKILLS - 1,Practical skills, familiar with construction practice: laying, pulling and connecting cables (using cables glands, terminals blocks, cable lugs, bus bar, sealing compound… understand working principle of HVAC LV HV equipment with different technology compressor, split units… troubleshoot and Repairs Of Electric Installations / use of drawings (single line and schematic diagrams), vendor documents, name of plate and it drawing in times of Maintenance and Installation . knowledge of electrical symbols. general facilities electrical network philosophy: main generation, emergency generator, switchboard and UPS. And a basic understanding of inter-tripping and interlocking action, load shedding and load sharing modes, understanding of Equipment Terminology and various process equipment, eg Process Flow diagrams (PIDS) Process and Instrument diagrams (P&IDs) Loop diagrams, Sama diagrams FCV Experiences & Current H2S certificate

Excellent knowledge of all International Codes and Standards in PLC, DCS,ESD,F&G systems, HIPPS,SCADA/RTU field like IEC, ISO, SOLAS,API,ANSI/ISA,ASME,NFPA,BS, ITU-T, SAP/R3 experience and know-how etc. and genera knowledge of Other disciplines, and gas treatment installations

2, Able to test and verify alarms, trip and interlock settings and perform insulation and continuity tests, LV Electrical equipments: in time of dismantle, replace defective parts, reassemble, reconnect and check the system. Identify all accessories. Able to test and work on field station modules / fluid distribution Headers Instruments

3, Safety at work, good Knowledge of electrical habilitation requirements with certified as it required in the Field knowledgeable on PPE requirement and MSDS interpretation of area classification, marking for hazardous area ATEX rules and Ex explosion proof materials, expected to work safely and independently on non-critical equipments preventive maintenance and basics procedure, knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia)

4, Experience in pneumatic, hydraulic, electronic, instrumentation and control, Experience in pre-commissioning, commissioning, and start-up. Familiar test function of control valve (electronic/pneumatic), on-off valves (hydraulic such as BDV valve, ESDV valve, PSDV valve), anti surge valve, MOV valves, and deluge valves (fire hydrant). Ensure that electrical/instrument installation conforms with the codes and standard compiles the rules and regulations and government authority and good experience in Yokogawa, Foxboro, Bailey, Triconex, HIMA, HIPPS Instrument

5, Involved in preparation of project execution schedule, planning package, and make progress daily report and monthly report

Involved and weekly meeting, issue comment for project progress, HSE regulation

6,Project Location ODP 1 AND FSO UNITY& AKPO Project,Agbami Field Mobil Deep water Offshore OML58 Upgrade phase 1, client Ponticll to Total E&P / TOTAL Offshore in Angola /Congo BP Offshore

7, Acquired Certificate, Helicopter Underwater Escape Technique (HUET&SAS), use of CMMS software and SAP/R3,AutoCAD Computer Literate &Microsoft Excel, Word QC & QA Project management appreciation and evaluation on Works scope and Final control Elements Training systems(TPC Training Systems),

CAREER OBJECTIVES

To work in a competitive, well-structured and result-oriented organization, andcontribute substantially towards the realization of its set objectives and goals

PROJECT RESEARCH/IT WORKS

1. Analysis on hydro power and solar energy system and its uses.

2. Designing and construction new model am and fm digital micro wave transmission.

WORK EXPERIENCE

May . 2012 - till date

SAIPEM CONTRAITING NIG-LTD

POSITION E&I INTERVENTION EGR

Department MMO

Current Project –GMC on Wowrri Refinery

Project LOCATION-AKPO& USAN FPSO

TOTAL E&P LTD

job responsibilities

Preventive maintenance on E&I equipment at gas processing unit at Wowrri Refinery Intervention maintenance of fire damper control swatch with the function test in P&S Module in Akpo FPSO/USAN and SDV –PSV ROV valve Panel and Rental maintenance of PDIT LIT ESDV in process units. Preventive maintenance / function test on the metering Bus bar and ABB control panel on crude recirculation pump and maintenance of HVAC Compressor control panel in HVAC Plant Room, and Air compressor motor in the crude Recirculation pump in the P&S Module and Rental maintenance in Rolls Royce gas Turbines / calibration PT in Turbines maintenance of fire water pump system at AKPO FPSO

EPIC ATLANTIC LIMITED

PLOT 212 TRANS AMANDI PORT HARCOURT

(SOWOSCO YARD)

POSITION: INSTRUMENTATION SUPERVISOR

Project LOCATION, AS-BUILT CAWTHORN CHNEL

GAS PLAT SPDC

NLNG BONNY

SPDC UPGRADE BONNY

NAG SPDC

job responsibilities

Supervisor of the mark-up of all the instrument designer eg PID /LOOP and LOGIC diagram at the gas plant and Rental maintenance of E&I equipment in gas plat at NLNG backup gas supply project in Bonny and Bonny NLNG extension project hookup and Bonny NAG Upgrade and Caw thorn Chanel project SPDC AS-Built project

CARMEL TEKNO LIMITED

18 CHIEF EJIMS STREET RUMUOMASI, PORT HARCOURT, RIVERS STAT.

POSITION: SNR, INSTRUMENTATION ENGINEER

POSITION: SNR, INSTRUMENTATION ENGINEER

Project LOCATION ; CONGO BP OFFHORE: ODP 1 AND FSO UNITY&AKPO PROJECT

My -Current-CLIENT:BP, CONGO

1Project description,FSO unity Nigeria -Sir Instrumentation maintenance Service Coordinator

department:Hook-up /maintenance Service

07/2007-02/2008

2,Project-description:AKPO-Nigeria-Instrumentation Commissioning Engineer

department: Commissioning

06/2008-01/2009

3, Project description: TOTAL Offshore in Angola / Congo BP Offshore- Lead, Instrumentation Commissioning Engineer

Department :Commissioning

4, Project-description Shutdown work at Obagi gas plant

TOTAL E&P Nigeria Ltd,

T U –D Concept

POSITION: INSTRUMENTATION SUPERVISER

job responsibilities

Supervision of Replacement oforifice plate and FT and the calibration with the Inspection of the orifice plate and Coordinator the field service work at Obag Sundown and Coordinator the work permit.

Supervision of Replacement ofHIPPS panel / commissioning of HIPPS and inspection of ABB flow meter, Installation of field station modules / fluid distribution Headers and total Rental maintenance of E&I equipment in FPSO/, client BP Offshore in Congo (SAP/R3 experience)

Installation of control valve &P.S.V/SDV replacement of pressure control systems in Turbine in ODP 1 installation of Rosemount vortex flow meter& pressure gauges,pressure testing of cylinders & day to day inspection on operation control systems in the Turbine compressor / maintenance of subsea connectors & power bank control system solution, remote control systems . Rental maintenance of hydraulic equipment control subsea systems,In TOTAL Offshore in Angola / Congo BP Offshore.

Advise engineering team on calibration provisions for all new projects. Assist in Terminal/Plant Operations teams in resolution of stock variance issues

Manage day to day activities associated with calibration including client liaison in calibrators’ equipment certification, etc

Overseeing of Installation of Gas Level Transmitter in Turbines and commissioning of power distribution hook-up line & preparation work monitoring preservation, documentation of E&I report & completion and pre-commissioning activities, commissioning temporaries, etc

Ensuring necessary HSE reviews are undertaken and identified actions completed.

Conducting design reviews for commissioning and start-up require

Ensure all calibration works are carried out in line with & Undertake hands-on calibration and certification activities for gas and liquid measurement systems for the client facilities And validation of certification of these measurement systems,Swagelok fittings of instrument / PFA fittings, Tube at FPSO Mode

Involve in any activities commissioning to make sure the testing according to the logic Control design such as Gas turbine control panel (Speedtronic Mark VI ) for Compressor AN 250 and MCL 1002 Compressor manufactured by NUOVO PIGNONE, Steam Turbine Control, and CO2 Skid.

Advising on the acceptance of the formal Handover from contractors at Pre-commissioning completion stage.

Preparing all commissioning planning and estimate documents in cooperation with Commissioning Group.

Ensuring all necessary work Permits, and other Compliance requirements are in place prior to commencement of any commissioning activities.

Overseeing contractor’s commissioning and support to start-up scope of FCV & LIT TT

Ensuring acceptable Formal Handovers to Operator are prepared .And Installation of PTFE hose, Swagelok tube fitting, Swagelok tube adapters NPT fittings, gasket,on flanges, lap joint flanges,l-line fittings

Participating in and assisting with the co-ordination of HV AC the Project’s performance test(s). Installation of Gas Level Transmitter in Turbines ODP1 OML 100 offshore/ calibrating control valve and LT, in the Turbines compressor certified Turbine Meters /Carioles Meters, Conventional Pipe Proves, and Small Volume Proves

Contributing to the Commissioning Group’s improvement process and close-out report in

Level indicating controller valves Installation

And Installation of PSI Transmitter at TOTALFSO Unity

Read work orders, instructions, formulas, procedures and calibration charts

Assemble and install pipe sections and fittings required for calibration and Understand technical operating in equipment, flow media, pressure or temperature equipment and other measuring devices in the Plant

To maintain a comprehensive knowledge of up-to-date industry standards to the client

GOMANS ENERGY SERVICES

34 IKWERRE ROAD PORT HARCOURT

2007-2008

POSITION: SNR, SERVICE ENGINEER

Project LOCATION AGBAMI FIELD

CLIENT: Chevron Nigeria

1-Project description, Agbami FPSO Nigeria -Sir Instrumentation maintenance Service Coordinator

department:Hook-up /maintenance Service

01/2006-02/200

job responsibilities

Supervisions ofRental maintenance of Instruments in plant and supervision of installation of water injecting pump and routine maintenance of 4-way valve and ball valves chokes at FPSO and services of Electric power panel unit control systems in Turbines, Pre-commissioning of power station hook-up Turbines Coordinate and manage electrical and control systems, grids, Transformers and generators. S and injectors in gas flow-line in turbine. Installation of power distribution digital control panel in transmission Room, installation of new PLC digital instrument control systems e.g. remote and close control facility of the main circuit breakers of the HV/LV networks from a control point/which control distribution systems in the electrical technical room in the FSO unit. Witness/check during phase construction, installation, and perform pre-commissioning, commissioning conform to P&ID detail include codes and standard.Provision of at the VDU base to provide animated display of powergeneration and interface with integrated Putting down alltechnical and Electricalreport and calibrating control valve and LT/ water injecting pump that is installed in existing well,

VINP-GRUP

PLOT 123 TRANS AMADI IND. LAYOUT PORT HARCOURT

2004-2007

POSITION: SNR, ELECTRICAL INSTRUMENTATION

ENGINEER (E&I)

Department:Hook-up /maintenance Service

CLIENT:MOBIL Nigeria

job responsibilities

Pre-commissioning of Turbines HV multi meter digital switch charger in transmission room, and installation of LV &HV voltage distribution panels & control system board. And reviewed the approved by the GIS manufacturer before installation to ensure successful operation in the network turbine facilitate of automatic regulator system.

Supervision of all electrical and instrumentation motor regulating system that is installed in turbine network transmission station to control the power that flows in the breakers

Analyzing PID & PFD, LOOP, and flow line diagram during the time of installation, installing switch board automatic change-over system, repairing battery charger and power inverter of a DC UPS & AC UPS system. And Swagelok pressure Transducers

FEDERAL GOVERNMENT COLLEGE, ABUJA 2003 – 2004 NYSC

job responsibilities

Class/Teacher physic mathematics. SSS1-SSS3

NATIONAL ELECTRIC POWER AUTHORITY (NEPA) ABAKALIKI DISTRICT.

ELECTRIFICATION PROJECT

(I.T) INDUSTRIAL TRAINING - 2002

POSITION: ELECTRICAL TRAINEE ENGINEER

job responsibilitiesInstallation of 120KVA/500kvA mw substation Transformer and laying HV/LV distribution line armored cables from the high tension to the transformer and synchronizing the frequency of the transformer to have a successful state at the maximum ambient temperature

Pre commissioning of new one that is install and the reviewed GIS, IOS and EIO approver Installation ofthe capacitors and circuit breakers with cable log in the input and output voltage in switchboard at transformer to ensure successful protection in the control panel unit.

HOBBIES:

SWIMMING, FOOTBALL AND READING NOVEL

REFEREES:

HON. INNOCENT UGOCHIMA

NATIONAL ASSEMBLY ABUJA

PHONE: +234**********

MR MOSES ADI

S.P.D.C PORT HARCOURT

PHONE: +234*********

SECURITY AND COMMUNITY RELATIONS DEPT

MR. PETER AZORJI

TOTAL E&P NIGERIA LED

PHONE: +234**********

MATERIAL MANAGER

Contact this candidate