Project Manager

C S RAGHAVENDRA PRASAD

No. * (Old No.**), ‘Brindavan’, Kamakoti Street,

Ramnagar, Ambattur,

Chennai, INDIA – 600 053

Phone (Mobile): + 91 -944-***-****

Phone (Land Line): +91-44-265*****

e-mail: *********@*****.***

_________________________________________________________________________________________

Career Summary

C.S.Raghavendra Prasad has over 24 Years (17 Years in Pressure Parts, Pressure Vessels, Tankages etc…) (7 Years in Oil & Gas) of Experience in Detailed engineering in Preparation and Drafting, checking related to power Projects and Refinery & Petrochemicals. In both Indian & Global projects.

Responsibilities are modelling of equipment thru PDS Equipment Layout and finalizing Nozzle Orientation; & piping systems; Development of detailed piping drawings for various piping systems.

Responsibilities and having capabilities in piping layout in Process area and Utilities and off-sites.

Preparation of ASME U-Stamp Pressure Vessels of Arrangement and detailing of equipments, Cutting Plans, Material take off.

Preparation of Pressure Parts for Power Boilers and Industrial Boilers, Heat Exchangers,

Well working knowledge in PDS & Pelican Forge Supportmodeler

SPECIALIZATION EXPERIENCE / KNOWLEDGE

Knowledge of Various Design Standards and Codes like ASME ASTM ANSI IBR

Work Experience : Total: 24 Years

• FOSTER WHEELER ASIA PACIFIC PTE LTD , Singapore

June 2010 to May 2012 working as Sr. Piping Designer

Involved in preparation and Fixing the Nozzle Orientation for Total 9 columns and fixing the Ladder and Platforms

Involved in preparation of Column piping

Involved in model review

Modeling of Secondary Pipe supports Thru Support modeler (Pelican forge)

Involved in preparation of Plot Plan & Piping Schematic Layout for Chemical Plant and Parma Project

Involved in Preparing of MTO

Project – BTR SINGAPORE - Jurong Island,

(EPC)

Client - LANXESS BUTYL PTE LTD

Area – I-Plant

Project – SINGAPORE INFRASTRUCTURE - Jurong Island,

(FEED)

Client - LANXESS BUTYL PTE LTD

Area – Infrastructure

Project – Synthomer Monomer Recovery – Kulang ,Malaysia

Client - Synthomer Sdn.bhd

• INTECSA Industrial S.A, Madrid, Spain (On Deputation through QUEST ltd India)

July 2008 to Oct 2009 Working as Sr. PDS-Designer

Involved In preparation Equipment modeling , Piping layout using PDS –Piping designer

Involved in preparation of Orientation and Elevation and Planning study Diagram

Project – PROYECTOR REPSOL – YPF – C10 AMPLCATION

Client - REPSOL YPF REFINERY CANTAGERA

• Bechtel India Private Ltd, ( On Deputation through EPC Global Pvt Ltd , Gurgaon)

Oct 2007 to June 2008 Working as Sr. PDS-Designer

Working as a Responsible Engineer For the below said Area

Project: - Motiva Enterprises LLC and JV Port Arthur Refinery.)

Area handled: Crude Area (Amine Flash Drum and Amine Contactor Area)

Involved in Preparation from 30 % to 90 % of model review and reviewing the tags

Involved in Checking the Vendor Prints and Redlining the comments if any

Simultaneously modeled the supports in the initially purpose

Involved in preparation of O & E and Planning Study Diagram

• C.S.Impianti , Srl, Milan, Italy ( On Deputation through ITC Technology Srl , Italy)

Sep 2006 TO Sep 2007 Working as Sr. PDS-Designer

Involved in Preparation of Equipment modeling, Piping layout using the PDS-Piping designer

Running of interference Clash report and Resolving Clashes, Review of Structural Layouts, Review of Nozzle Reports And isometric extraction.

Review of Vendor drawings, Review of Stress Support Marking for critical lines, Review of isometric Drawings and Issuing of Isometric for AFC, modeling reviews using SPR

Involve in piping modeling for the Fire Water Systems

Involved in Piping Layout For Tie in Demolition

Project: - SALAVATNFEFTEORGSINTEZ, SALAVAT - RUSSIA HDPE 120 KT / Y

Client: - Tecnimont ICB

Area Handled: Extrusion Area, Hexane Tank Farm Area, Catalyst Area

Project: - QURRAYAH SEAWATER TREATMENT PLANT

Client: - Saudi Arabian Oil Company B.V (A.O.C)

Area Handled: Polyelectrolyte Biocide & Coagul,

Hypochlorite and Laboratory

• FOSTER WHEELER INDIA PRIVATE LIMITED, Chennai, India

June 2001 to Sep 20006 Worked as Senior Designer – Piping

Responsibilities for Preparation of Isometric Preparation of MTO for isometric drawings, preparation of piping support drawings with reference to the GAD and P & I Diagrams. Development of piping layouts and Nozzle orientation, Defining structures required for equipment and piping systems and interface with civil department.

Project : - Saudi Aramco Mobile Revamp Project (SAMREF)

(LSADO & 2006 Turn Around Projects.)

Area handled: Light Ends, Alky Soft , merox, Inter stage Amine Absorber.

Responsibilities for Preparation of Equipment modeling and nozzle orientation, Piping layout using the PDS-Piping designer modeling. Pipe rack arrangement and manifold lines. Preparation of isometric extraction and checking the Isometric drawings with layout.

Project : - BDO (Butanediol) Plant, Insvita, South Korea (Basic Engineering Design)

Area handled: Acetylene Supply & BYD Reactor, Catalyst Handling, methanol & Formaldehyde column & Utility Area.

Responsibilities for Preparation of Equipment modeling and nozzle orientation checking coordinates through nozzle reports and Piping layout using the PDS-Piping designer modeling. Pipe rack arrangement and manifold lines. Preparation of isometric extraction and checking the Isometric drawings with layout.

Project: - SHARQ 3rd Expansion Utility and off sites Project

Area handled: Demineralized Water Tank, Boiler and condensate Area, Condensate Area.

Preparation of Boiler Pressure parts detailing for 2 x 400 Mw Springville Expansion Project-Bechtel Power Corporation, USA.

• ENSYS TECHNOLOGIES PRIVATE LIMITED. Chennai, India.

May 1999 – April 2001 Worked as JUNIOR ENGINEER – Engineering Dept.

Checking and Release of Fabrication Drawings for Incinerator

Preparation of Bill of Quantities

Deputation

Deputed to Al Ballash Structural Steel Fabrication L.L.C – Dubai. For 7 months.

• CHIP NGAI ENGINEERING WORKS SDN BHD (Fully Owen by CN ASIA CORP. BHD) Malaysia.

April 1997 – May 1999 Worked as AutoCAD DRAUGHTSMAN – Pressure Vessels Involved in Checking and Preparation of Cutting plans for Shell, Dished ends, Roof plates and Bottom plates for Storage Tanks (Max. dia. of 48 mts and the height of 16 mts). Preparing details for Roof Truss and Center Drum. Preparing of Material take off. Familiar with dished end work chart, BOM, welding details and Material specifications for Plates, Pipes and pipefittings.

Projects Handled

Singapore Acrylic Easter Pte Limited. Singapore

Petronas Fertilizer Kedah, Malaysia

Sembawang Engineering & Construction, Singapore

Kertih Aromatics, Malaysia

M W Kellogg / Exxon Chemical, Singapore

• IGNIFLUID BOILERS INDIA LIMITED Chennai, India.

November 1995 – April 1997 Worked as AutoCAD DRAUGHTSMAN – Boiler Dept.

Preparation of General Arrangement and detail engineering drawings for Steam drum, Water drum, Headers, Economizer

Preparation of General Arrangement and detail engineering drawings for Chimneys and Flue gas ducts.

• I. A. E. C. BOILERS LIMITED Chennai, India.

March 1993 – November 1995 Worked as AutoCAD DRAUGHTSMAN – Boiler Dept.

Preparation of General Arrangement and detail engineering drawings for Steam drum, Water drum, Headers, Economizer.

Preparation of General Arrangement and detail engineering drawings for Chimneys and Flue gas ducts.

• VAISHU ENGINEERING INDUSTRIES LIMITED Hyderabad, India.

December 1990 – March 1993 Worked as DRAUGHTSMAN – Boiler Dept.

Preparation of General Arrangement and detail engineering drawings for Tube sheet layout, Heat Exchangers.

Preparation of General Arrangement and detail engineering drawings for Smoke Boxes, Chimneys and Flue gas ducts.

• ENFAB ENGINEERS AND FABRICATORS Hyderabad, India.

November 1989 – December 1990 Worked as DRAUGHTSMAN

Involved in Preparation of General Arrangement and detail engineering drawings for Pressure Vessels like Reactors and Heat Exchangers. Preparing of Bill of Materials. Inspections of Fabricated components.

• ENMAC ENGINEERING PRIVATE LIMITED Kolar, India.

December 1988 – November 1989 Worked as TRAINEE DRAUGHTSMAN

Involved in Preparation of Engineering drawings for Pulleys and Idlers

• Software Skills

Proficient in AutoCAD RELEASE-14 / 2000

Proficient in Microstation –V7.1 and V8.1

Proficient in PDS – 2D drafting

Proficient in Plant Design System ( PDS)

Smart Plant Review ( SPR)

-Piping designer

- Equipment Modeling

-Isometric Drawing Manager

- Drawing Manager

-Interference Manager

- Support modeler (Pelican Forge)

In house Trained in PDMS

Familiar with Microsoft Office 2000

• Specialization Experience / Knowledge

Knowledge of Various design standards and codes like ASME, IS, ASTM, ANSI and IBR

• Personal Details

Name : C S Raghavendra Prasad

Address : No. 2 (Old No. 11), “Brindavan’, Kamakoti Street,

Ramnagar, Ambattur,

Chennai – 600 053, INDIA.

Date of Birth : 10 June 1970

Nationality : Indian

Qualification / University / Year of Passing : National Apprenticeship in Draughtsman – Mechanical

/ Indira Ind. Training Institute/ Chennai, Tamil nadu

India / 1988

Marital Status / Number of Dependents: Married / Two

Passport # / Validity: E5769067 / 30 June 2013

Contact this candidate