Engineer Design
Resume:
Dustin D. Crawford
West Lafayette, IN 47906
Phone: 765-***-****
Email: *******@*******.***
OBJECTIVE: To obtain a design engineering position.
EDUCATION: Purdue University
Bachelor of Science
Technical Graphics
GPA 3.5 of 4.0
Pro/ENGINEER 17 years~36,000 hrs+
Pro/ENGINEER Wildfire Releases 1.0-4.0
Pro/SHEETMETAL Pro/INTRALINK Pro/PIPING
Pro/SURFACE Pro/ASSEMBLY Top Down Design
Pro/DETAIL Pro/DIAGRAM Pro/HARNESS-MFG
Pro/PDM Pro/CABLE Advanced Surfacing
GD&T ANSI 14.5 Standards Mil Specs
Pro/MECHANISM Pro/MECHANICA FEA/FMEA Studies
AutoCAD Release 12 though 2009 Pro/PROGRAM
Routed Systems Designer
Windchill/PDMLink Windchill ProjectLink Engineering Releasing
Certificate of Achievement in Tolerance Stacks per ASME Y14.5
Tolerance Analysis (6 sigma methodologies)
Machinery’s Handbook and CNC knowledge
Test Stand design and vibe test simulation for space flight hardware on CrIS satellite at ITT Space Systems
PTC Trained in Top Down Design, Large Assembly management, Pro/DIAGRAM, and Pro/CABLE
Trained in Pro/DIAGRAM, Pro/CABLE and Pro/MANUFACTURE (Flat states and Formboard)
Rand Certified in Pro ENGINEER 200i2, Pro/ENGINEER Wildfire 2.0
Injection Molds, Rotomolding, Sand and Precision Castings/Vendor Coordination
RELATED EXPERIENCE
Design Engineer
Lockheed Martin, Orlando, FL
Design engineer within the F-15 SA IRST and SpectIR program team. Working within the electrical engineering and packaging group using ProE 4.0 to design harness and mechanical parts. Responsible for design, production support, and presentation of designs and concepts, all work is designed within ProE and PDMLink, and Lockheed Martin Systems. Work with electrical engineers and their schematics to produce a full harness with all pins, connectors and wire gauges into ProE to insure installation and proper fit. Responsible for geometric tolerances and stack ups in mechanical design as well as releasing procedures on all work performed.
Dec 2012 to Present
Design Engineer
Navistar, Fort Wayne, IN
Designer within the Power Train group, all work is on UGS NX 6.0 and managed within Teamcenter. Working on test fixture equipment for the Estar program currently, designed fixture equipment for failing gearbox and assisting in the test process while responsible for fixture design. Also responsible for other design support and work within the Power train group.
May 2011 to August 2011
Design Engineer
ITT Space Systems, Rochester, NY
Design satellite systems in ProE Wildfire 5.0 within specialty engineering assisting electrical and mechanical engineering. Work within Windchill PDMLink 9.1 and assist various teams in migration from Unigraphics/Teamcenter to ProE 5.0. Work within different groups and develop part and assemblies for top level assemblies. Development on Worldview 3 satellite system team, participate in Pro/E groups, teach staff members in ProE, SolidWorks, and implement ProCable and Routed Systems Designer where applicable in collaboration with my supervisor in Clifton, New Jersey.
January 2011 to March 2011
Design Engineer
Thermo King., Bloomington, MN
Responsible for electrical component integration and harness design of trailer mount refrigeration systems. Worked with electrical and mechanical teams to develop the main harness for production and assembly within RSD 8.0 along with vendor coordination. Worked with technicians of the floor and solved assembly and routing issues, both current and past issues that affect changes to harness for installation purposes. Designed assemblies in Pro/ENGINEER 4.0 and work with top level model and integrate harness assembly and electrical components within top level models.
September 2010 to January 2011
Design Engineer
Lockheed Martin., Lakewood, CO
Responsible for design of interior and exterior systems and subsystems of NASA's Orion crew exploration vehicle in Pro/ENGINEER Wildfire 4.. Responsible for ECLSS wall design and integration for astronaut support inside the Orion spacecraft. Worked with FEA and test design integrations to optimize design for strength and durability. Present at design reviews and released designs through Windchill PDMLink and Windchill ProjectLink.
April 2010 to August 2010
Design Engineer, Checker
DRS Technologies Inc., Troy, MI
Responsible for checking drawings and models in Pro/ENGINEER Wildfire 4.0 and Intralink 3.4. Perform pre-checking of manual drawings for technical data and specifications and provide guidance to designers as to how drawings should be created in Pro/ENGINEER from piece parts to major assemblies on the ARMY’s FMTV vehicles. Also a member of the electrical design team using RSD, Pro/Diagram and Pro/Cable to develop schematics and harness assemblies and drawings. Responsible for checking electrical drawings and Pro/Cable routing and methods using into create flat drawings, and contribute to best practices and participate in team meetings and progress reports.
August 2009 to March 2010
Design Engineer,
L-3 Communications Corporation, Coleman Aerospace Orlando, FL
Duties included modeling and design using Pro/ENGINEER Wildfire 4.0 along with database management using Intralink. Worked in engineering to create electromechanical assemblies, drawings, and releasing packages in Pro/Engineer. Also responsible for creating diagrams with Routed Systems Designer to create XML files for export to be logically referenced in Pro/Cable to create wires and cables to show intended routing to and around components. Work within Pro/Program to build assemblies and define movement and configuration. Assignments involved working with both mechanical and electrical engineering. Responsible for top model management in Pro/ENGINEER.
April 2009 to July 200
Design Engineer,
CNH Global-Burr Ridge Operation, Burr Ridge, IL
Perform design and detail of seeders and planters at the Burr Ridge facility. Responsible for detailing and production drawings for newly released parts and assemblies using Pro/ENGINEER Wildfire 2.0. Duties include welding specification, material designations, and drawings that explain and illustrate how to assemble for production. Design hydraulic assemblies and calculate hydraulic valve and hose requirements. Develop skeletons and write Pro/Program scripts regenerate planter in different positions for designing around the change of the planter from storage mode to planting mode. Also responsible for routing hydraulic lines utilizing Pro/PIPING and all releasing and documentation for purchasing and engineering records.
May 2008 to March 2009
Design Engineer,
ITT Space Systems, Fort Wayne, IN
Involved with test equipment and designing post launch equipment for the Cross-track Infrared Sounder (CrIS) satellite operations using Pro/ENGINEER Wildfire 3.0 and Pro/INTRALINK 3.4. Worked with IPT lead and CrIS program integrator to prepare satellite for launch and operation once in orbit. Designed test equipment for machine shop to produce, created models, drawings, and provided CNC data for material cutting for prototypes. Also designed cable runs and harness routings using Pro/CABLE and Routed Systems Designer on the CrIS satellite for equipment used on Pre and Post launch operations. Routed Systems Designer to concept intelligent diagrams to be finalized with electrical engineering to create final XML export to drive Pro/CABLE harness assemblies in the satellite and isolation fixture. Involved with ECN and ECR releasing efforts for the CrIS and ABI satellite programs in Pro/ENGINEER, Pro/INTRALINK, and Windchill.
March 2008 to May 2008
Design Engineer
Varian Medical Systems, Security & Inspection Products, Lincolnshire, IL
Responsible for engineering design and drafting of the Intellex-2 X-Ray system and managing data within Pro Intralink 3.4. Produced drawings assemblies, and parts within Pro/ENGINEER Wildfire 2.0 from AutoCAD 2008 drawings. Accountable for GD&T and following Varian drafting standards and material selection as well as parametric data management and setup within ProE for BOM creation and future WindChill purposes.
December 2007 to March 2008
Design Engineer,
Cummins, Columbus, IN
Developed ladder frame casting for the 2010 4WD Chrysler on the Light Duty Diesel design team using Pro/Engineer Wildfire 2.0. Responsibilities included modeling and developing concepts for a high volume die cast part. Also accountable for cost and weight reduction wherever possible and prototype costing. Duties also included design decisions and material selection as well as delegating designed parts to the drafting department for detailing and the release process at Cummins.
August 2007 to December 2007
Design Engineer,
ITT Space Systems, Fort Wayne, IN
Responsibilities included design, drawings, and geometric dimensioning and tolerances of space system assemblies and parts for satellites. Also accountable for ECN and ECR releasing, material documentation, and mass properties tracking within Windchill, Pro/INTRALINK, and Pro/ENGINEER Wildfire 2.0. Duties also include routing harness and cables within Pro/Cable derived from XML export files developed in Routed Systems Designer created from schematics developed in Visio by the electrical engineering group. Involved with test equipment and machine shop concepts, responsible for models, drawings, and CNC post output to the ITT machine shop. Also utilized Pro/MECHANISM and PowerPoint to create and analyze and present static and dynamic concepts in design reviews. Worked with the analysis group and assisted in FEA work. Responsible for test stand design of CrIS satellite and coordination with FEA group in Rochester, NY for vibe simulation.
June 2006 to August 2007
Design Engineer,
General Dynamics, Muskegon, MI
Worked within engineering design on the Future Combat Systems program to create ProE models and assemblies for concept presentation. Duties included modeling concept parts and working with FCS design teams to incorporate models and perform large assembly management necessary within Pro/ENGINEER Wildfire 2.0 and Pro/INTRALINK 3.3. Designed for human factors and interior design around soldiers, managed all ProE data within and Windchill and Intralink. Attend meetings, presented ideas in ProE and PowerPoint, and collaborated electronics and harness routing among different design groups to acquire harness weight and space claims. Also worked with the ProE user group setting up assemblies using Pro/Program to regenerate different stages in movement of turrets, doors, and other movable parts on tanks and turrets.
June 2005 to May 2006
Design Engineer,
Caterpillar, Lafayette, IN
Responsibilities included engine harness design in the machine applications group at the Lafayette Engine Center. Worked with engineering group to first design the schematic in Pro/DIAGRAM and then route the engine harness accordingly in Pro/CABLE. Responsible for splice optimization, breakout locations, shielding, and mounting considerations derived from the ProE shrinkwraps of the engine being routed. Also accountable for each component and its function in the harness such as the ECM, can data link, turbo outlet, etc. Created drawings driven by the 3D harness assembly and formboard assembly (flat stat) in the manufacturing harness mode within Pro/ENGINEER 2001 and Pro/ENGINEER Wildfire Release 1.0 and the Teamcenter Enterprise metadata manager, HVC, and EDS. Utilized the electric lines SDP (Structured Design Procedure) software to comply with CAT standards and assist in checking wire gauges to pins, sockets, and terminals. Also responsible for group drawings that accompany each harness drawing and working with shop technicians and factory personnel as a liaison to gain information and design insight to create a better end harness. Entire flat harness drawings created sent to supplier to be built as a prototype and then placed in production after a test engine run with the prototype harness, worked supplier to complete production harness.
January 2004 to June 2005
Design Engineer,
General Dynamics, Muskegon, MI
Duties included modeling and design of parts and assemblies from concept to completion within Pro/ENGINEER. Design team contribution to set skeleton and Pro/Program routines to move parts and assemblies for design and fit. Responsibilities included material selection, geometric dimensioning and tolerancing. Also provided guidance for detailers to create drawings and capture design intent for manufacturing. Parts designed for gun and tank application ranged from castings to sheetmetal, and injection molded plastics. Responsible for GD& T, jig and fixture design production of parts and CNC post output data to shop for tooling, setup, FEA and FMEA studies of parts and assemblies. Also responsible for providing support using Pro/CABLE for harness routing and electrical design integration with hydraulic and mechanical designs when necessary for the electrical and mechanical design groups for hybrid tank application. Designed interior parts for the 8x8 hybrid tank considering human factors and conditions. Ran pneumatic and hydraulic lines in Pro/PIPING as well as assisting other engineers in Pro/ENGINEER Releases 19, 20 and 2001i .
May 2001 to June 2003
Design Engineer,
Lucent Technologies, Naperville, IL
Responsible for modeling and detailing within Pro/DETAIL and Pro/SHEETMETAL for mobility servers in the wireless cellular telephone group. Also responsible for creating drawings in Pro/ENGINEER of parts, assemblies, and cable routing along with data management within PDM and adhering to Lucent Technology drafting and modeling standards.
December 2000 to May 2001
Design Engineer,
Caterpillar, Decatur, IL
Duties included harness design within Pro/CABLE in parametric synchronization with the electrical engineering group in Peoria who created preliminary electrical design of schematics in Pro/DIAGRAM. Also responsible for PDM database management and using HCV and EDS Caterpillar software. Work was performed for the wheel tractor scraper group, cabling ran ranged from engines and transmissions, to- control boxes to hydraulically driven machinery Also responsible for modeling and detailing of electronic boxes and switches used as electronic enclosures and bosses for harness guides.
July 2000 to December 2000
Design Engineer,
Inrange, Lumberton, NJ
Worked with mechanical engineers to design sheetmetal enclosures and electronic packaging for company products used for storage area networks, fiber channel, switches, directors, and extenders offered by Inrange. Created drawings, parts, and assemblies in Pro/ENGINEER release 2001I. Assisted engineering team in general use and maximizing benefits of using Pro/ENGINEER and Pro/INTRALINK.
March 2000 to July 2000
Design Engineer, Detailer
Club Car, Augusta, GA
Assisted engineers using Pro/ENGINEER release 20 and Pro/INTRALINK to produce models and drawings conforming to engineering change notices. Responsible for interacting with engineers and shop personnel as a liaison in order to successfully close ECN packages and follow Ingersoll Rand/Club Car requirements. Designed plastic injection molded parts using Pro/SURFACE on interior and exterior of golf carts for production. Also designed casting parts for clutch and engine purposes, created cam driven equations within Pro/ENGINEER to produce parts.
December 1999 to March 2000
Design Engineer,
Case Backhoe, Burlington, IA
Worked in conjunction with the Case Burr Ridge, IL facility and the Case Pro/ENGINEER technical support team to implement Pro/CABLE and Pro/DIAGRAM driving electronics used on 580C backhoes designed and manufactured the Burlington site. Also performed tasks within backhoe assemblies and parts, tasks included modification of existing castings, injection mold plastics, and sheet metal parts along with development of new designs.
July 1999 to December 1999
Design Engineer, Detailer
Ingersoll-Rand, Davidson, NC
Assisted engineers in production of manuals to accompany industrial scale air compressors for field maintenance and part ordering. Manuals were created within Pro/ENGINEER associating assemblies from PDM using Pro/TABLE and Pro/REPORT to show parametric information as needed.
December 1998 to May 1999
Design Engineer, Detailer
John Deere, Waterloo, IA
Responsible team member of the design of the 9000T large track vehicle (LTV) from concept to production. Designed and modeled new products and provided support for existing designs using Pro/ENGINEER releases 17, 18, 19, and 20 in the 9000 series 4WD and track tractors groups. Parts designed were castings, sheetmetal, injection molded, rotomolded, and thermoformed plastic parts and assemblies for body, engine, drivetrain, and articulated hydrostatic steering application. Assisted engineers and provided technical support in Pro/Program to move tractor and design around max articulation and oscillation of 9000 series wheel tractors. Assigned a DEC Alpha and gained responsibility for the PTC/Deere implemented Top-Down Design project for the 9000 4WD design team, this main assembly served as the design for base for the 9000T due commonality of the 9000 4WD and the 9000T. Also interfaced with cab interior group creating plastic parts in Pro/SURFACE and worked with industrial designers to make concepts producible in Pro/ENGINEER. Worked with lead hydraulics engineer to run lines in Pro/PIPING and contributed to design of the hydraulic system. Also responsible for working with suppliers and coordinating materials available in order to create plastic injection mold, rotational mold, thermoform, and sheet metal models and drawing used to create parts.
May 1997 to November 1998
Engineering Detailer
John Deere-Sedona, Moline, IL
Detailed drawings and modeled parts in Pro/ENGINEER releases 16 and 17 on the Windows NT platform using DEC Alpha machines. Responsible for geometric dimensioning and tolerance design adhering to Deere standards. All sheet metal designs were on combines and required interaction with engineers at the Moline facility where sheet metal parts were formed.
December 1996 to April 1997
Engineering Designer-Detailer,
Caterpillar, Lafayette, IN
Modeled and designed engine layouts and casting components for new production releases in the 3600 diesel engine generator set group. Also part of the eighteen-cylinder experimental engine design team, responsible for modeling crankshaft, engine castings, and GD&T involved in new cylinder design applications. Created drawings and modeled various engine parts in Pro/ENGINEER release 14.0-16.0 along with documenting change notices and database submission using the Teamcenter metaphase database manager and using HVC and EDS Caterpillar software.
January 1996 to November 1996
CADD Detailer and Designer,
Cadre Inc, Indianapolis, IN
Design of transmission parts for Allison Transmission as a vendor utilizing Anvil 5000 and Cadkey. Also involved in the tooling process, design, and geometric dimensioning and tolerance of of tooling fixtures and jigs used to manufacturing various parts at Allison Transmission in Indianapolis.
July 1995 to December 1995
Teaching Assistant,
Technical Graphics, Purdue University
Instructed and evaluated approximately 20 engineering students in university CADD labs using AutoCAD Release 12 with the Advanced Solid Modeling Extension (A.M.E.) concentrating on solid modeling on 486DX IBM compatible computers.
Fall 1993 to Winter 1994
Engineering CADD Operator
Delco Remy General Motors, Anderson, IN
Assisted the head controls engineer and electricians in representing control panels and other electrical outlays using AutoCAD release 12. Duties also included AutoCAD support, and configuration of plotters, digitizers, and IBM compatible computers within the Heavy Duty Design Support office in plant 17.
Summer 1993
Contact this candidate