314-***-****

c3oq12@r.postjobfree.com

c3oq12@r.postjobfree.com

Gary L. Pearcy _____________________

Oklahoma State Master Electrician Contractor License #017148

PROFESSIONAL EXPERIENCE

*/**-*RES. Benchmark I/E, LLC Tulsa, Oklahoma

Owner, Electrical Contractor, Master Electrician

• Company provided electrical and instrument installation and testing for skid mounted projects for on and off shore. Designed and did As-builts for electrical power, controls and instrument drawings using AutoCAD, as well as installing these projects. Benchmark I/E LLC employed four employees and was involved in each aspect of the projects. As a Licensed Electrical Contractor we also were involved in commercial and residential electrical projects which included electrical service power distribution and lighting for construction equipment storage, and other electrical projects of various sizes.

8/06-2/08 Linde BOC Tulsa, Oklahoma

Electrical Designer

• Worked on industrial projects including sulfur recovery units, gas compressor stations, and refineries.

• Designed electrical wiring and plan drawings using Auto-CAD, including electrical one line, switchgear, electrical distribution panes, interconnection wiring for compressor, DCS, fire and gas, H2s, and other electrical and instrument systems.

• Responsible for I/E installation detail drawings including BOM. This included a standard detail drawing package to be issued for each project, cable trays, grounding, lighting, heat trace, junction boxes, motors, cad-welds, switches, instruments, and supports.

• Made revisions to plan drawings and prepared and printed for “Issued for Construction” using Microstation. Prepared job matrix, updated project tracking and maintained instrument lists using Microsoft office programs.

• Assisted in electrical and instrument pre-commissioning and commissioning. Worked with contractors and Linde staff to inspect installation using drawings and documents, testing, and document preparation for system hand over. Also prepared as-built drawings and construction photographs.

• Conducted classes for Linde’s electricians, including Instrument Termination, Panduit Crimping Class, How to Read P&ID Drawings, Conduit Bending, and Electrical Code.

7/05-6/06 International Organization for Migration Kabul, Afghanistan

Electrical Project Manager

• Managed and conducted USAID projects to replace and/or repair electrical infrastructure, including Gardez and Shindand electrical grid, Khanabad Hydro plant, and schools and hospitals.

• Estimated electrical projects, designed and prepared drawings and BOM, and supervised procurement.

• Connected Caterpillar gen-set to city grid and conducted one month hands on training for Gardez electrical staff, including: proper maintenance for Caterpillar gen-set, safety, lock-out-tag-out, cad welding, crimping termination and proper tork, wire and breaker sizing, voltage drop, wattage and electrical loads, earth fault breakers, arc flash and the effect of electrical current in the human body, and electrical test equipment.

8/04-3/05 Sinclair Refinery (Nesco) Tulsa, Oklahoma

Senior Electrical Designer/Draftsman

• Using AutoCAD designed and developed area conduit routing, wiring diagrams and detail drawings, BOM, and procurement.

• Installed and conducted pre-commissioning and commissioning for UPS and main power for Cat cracker control room. Converted Cat cracker from Pneumatic controls to electrical controls using remote PLC and fiber optic.

•

3/04-5/04 Frontier Energy (Rowland Technical Staffing) Tulsa, Oklahoma

Senior Electrical Designer/Draftsman

• Designed and developed one line for 4160volt (power distribution) to a 2-4500 hp motor driven gas compressor station, area classification, plot plans showing conduit routing and grounding grid, wiring diagrams and grounding, lighting and conduit detail drawings using AutoCAD 2004

• Estimated electrical portion of the project using estimating software and by comparing material, equipment and labor cost from venders and electrical contractors

• Developed electrical standards for the project

• Presented standards and drawings to engineering firms interested in offering a turnkey for this project

8/03-3/04 Tulsa Insulation Specialists Tulsa, Oklahoma

Assistant Supervisor/Foreman

• Estimated and coordinated Sinclair Refinery unit instrument upgrade

• Routed and installed conduit, fiber optic cables, J-Boxes, and I/O Racks in Class I, Division I and II areas

• Tracked job percent complete and material used in MS Excel

10/02-3/03 Aircraft Fueling Systems Tulsa, Oklahoma

Senior Electrical Designer/Draftsman

• Designed and developed one line (power distribution) wiring diagrams and detail drawings using AutoCAD 2000 for airport fuel tank farms and aircraft underground fueling rings

4/95-9/02 PACE Group/An Exelon, TranSystems Corporation Tulsa, Oklahoma

Senior Electrical Designer/Draftsman

• Designed and coordinated wiring systems for gas compressor stations and other Class I, Division I and II locations, which included power distribution UPS systems, generator backup, lighting, PLC control panels, heat trace, installation and electrical details, and wiring diagrams and schematics

• Responsible for complete electrical drawing package

• Prepared construction as-built drawings, photographs, cost estimates, and project tracking for compressor stations, meter facilities, tank farms, skids, and off-shore skid projects, that included fully automated engine control panels, station level monitoring and alarms, electronic ignition systems, lubrication systems and electronic end devices

• Developed drawings and maps for high voltage power distribution and pole and transformer replacement

6/93-3/95 Oil Capital Electric Tulsa, Oklahoma

Electrical Foreman

• Supervised and coordinated installation of electrical equipment in hazardous and non-hazardous locations, installed microwave tower bases, satellite dish, and solar panel systems with battery backup for gas pipeline metering facilities

• Electrician

• Did total remodel of Tulsa Southern Hills Country Club kitchen

• Installed new water treatment building at Tulsa Water Treatment Plant, air handling units on roof of Tulsa County Jail, underground power distribution at Tulsa Marriott Southern Hills complex, and switch gear and MOVs at Sunco Refinery tank farm

10/91-5/93 Bishop Corporation Tulsa, Oklahoma

Electrical Designer/Draftsman

• Designed and coordinated wiring systems for new gas compressor stations.

• Drafted control panel layouts, installation details, logic and ladder diagrams, conduit rout-ing, installation and electrical detail, and hazardous location drawings using AutoCAD 12.

• Prepared construction cost estimates and responsible for project tracking

Electrical Superintendent

• Supervised instrumentation and electrical installation of turbine compressor for Consolidated Natural Gas and a motor-driven compressor for Conoco Pipeline Company

Electrical/Instrument Technician

• Installed conduit wiring, control panels, engine panels, instruments, tubing, and lighting for ANR Pipeline Company at three new compressor stations and Kansas Pipeline Operating Company compressor stations with metering facilities

OTHER EXPERIENCE

6/72-4/91 Various

Electrician/Instrument Technician

• Performed various field assignments as a Journeyman Electrician

• Did Electrical Design, estimating, and installation of conduit, cable trays, lightning rods and grounding systems, CAD welding, MIG, ARK, TIG welding, motor control, switch gear, and other wiring systems in the industrial, commercial, and residential electrical field

• Trained apprentices in conduit bending, control wiring, and NEC code requirements

• Repaired and troubleshot electrical systems, provided electrical maintenance design, estimated and supervised electrical construction over converter, material handling equipment, power distribution and controls

• Worked to automat compressor stations installing new engine panels

• Installed conduit, end devices, control panels, motor operated valves, flame de-tectors, ignition systems, and instruments on metering, prover, and heater skids

EDUCATION

Advanced Electrical Installation and Design Level 3 Certificate, BTEC, UK EdExcel

• Certificate

AutoCAD certificate, CADD Train, Canada

• Certificate

Will Rogers High School

• Diploma

SPECIALIZED COURSES

Oklahoma State Electrical Contractor’s Licensing- #17148

AutoCAD 3-D

OSU-National Electrical Code Effective Grounding Systems

OSU-National Electrical Code Calculations

Tulsa Technology AutoCAD, Electronics, Welding, Photography

U.S. Army Aircraft Electrical Systems and Instruments

SKILLS

AutoCAD 2-D- excellent

MS Office- Excel, Word, Power Point- excellent

Photography- excellent

Conduit bending- excellent/trainer

PUBLICATIONS

Conduit Bending 101, an electrical pocket handbook used in trade school and apprentice programs

Electrical Works 101, an electrical installations guide for IOM projects, Afghanistan

ACCOMPLISHMENTS

3/02 Surveyed the mechanical and electrical systems and developed facility drawing package of the Maywand Hospital complex and developed and drew one-line electrical drawing for the National Theater in Kabul, Afghanistan, with Engineering Ministries International

7/01 Installed a truss roof on an orphanage in Kampala, Uganda, with COTEAM, Inc.

Contact this candidate