Electrical Engineer Training

(C) 403-***-****

(H) 587-***-****

DEVENDRA CHAUHAN *********@*****.***

****, ** ** **, *******

OBJECTIVE

JUNIOR Electrical Engineer (Design/Drafting, Manufacturing and Projects)

To utilize the full capacity of my knowledge in an environment that will broaden my understanding of electrical & automation systems theory and its applications.

PROFILE

• Over 10 year of experience in Electrical design, drafting, Maintenance & its planning and technical administration.

• Excellent at product planning, purchasing and product development

• Solid understanding of Electrical and Electronics systems

• Excellent written and verbal communication skills

• Dependable, honest and work ethic

• Extensive experience on CMMS (WEBWORKS,MP2, PMC) to reduce downtime, extending equipment performance and life, to keep track of used parts and make balance of sufficient available parts, to provide accurate expense on each machines and to maintain equipment history to reduce future downtime.

• Developed expertise in Leadership skills, Training others, Negotiations, Cost reduction, Productivity, Organizing and Problem Solving

• Planned,organized and trained new people on the machinery to boost up the production and reduce the downtime

• Ensured appropriate parts and supplies are available in order to properly maintain essential equipment and uptime.

• Provide continuous modification in order to reduce downtime and to reduce the waste

• Ensured compliance with all safety and quality requirements

• Self-motivated, act like a change agent, team work concept and excellent relations

TECHNICAL SKILLS

DESIGN PLC BASED SYSTEM

• Allen Bradley, Omron,

• Siemens, Fanuc ELECTRICAL DESIGN

• Control panel design, low voltage distribution design

• Exposed to Canadian Electrical Codes, NEC, HVAC systems, Fire alarm Systems

SCADA & MACHINE VISION

• Omron, Cognex vision

• AB RSview, PanelBuilder

• Barcode & HSC programming SERVO,VFD & INSTRUMENTATION

• Allen Bradley servos using RS5000,

• BALDOR servos using mint

• Different make VFD programming & Installation

ROBOTICS

• ABB Quicktech

• Motoman ERC, CAD DRAFTING & COMPUTER SOFTWARE

• AutoCAD Electrical, See2000, Eplan, SAP PM

• MsOffice, C++, MATLAB, PSPICE, TUTSIM

• Presently Learning AUTOPLANT 2004, MICROSTATION V8, ETAP

MECHANICAL SKILLS

• Welding (MIG,TIG)

• Pneumatic, hydraulic, Machining OTHER TRAINING

• Safety and lockout training, Spill Management

• Certified forklift operator, Fire Extinguisher

PROFESSIONAL EXPERIENCE

New Food Classics, Maintenance Supervisor/Electrical Eng. MAY”08 – FEB”12

[Food plant] - 820, 60th street east, Saskatoon. SK.

• Developed expertise in Leadership skills, Training others, Negotiations, Cost reduction, Productivity, Organizing and Problem Solving

• Planned,organized and trained new people to boost up the production and reduce the downtime

• Ensured appropriate parts and supplies are available in order to properly maintain essential equipment and uptime.

• Provide continuous modification in order to reduce downtime and to reduce the waste

• Ensured compliance with all safety and quality requirements (OSHA, HACCP)

• Design and installed temperature control system for the nitrogen tunnel by replacing older honey well control system in order to reduce use of nitrogen and optimize system, installed and calibrated temperature transducer for the same system, develop system to control circulating fans, blowers for the same system, developed HMI system for the operator station to run recipe for different product cooling.

• Calibrated various pressure switches and other instrumentation for the ammonia plant for the blast freezers, installed heat trace for the various piping to prevent it from freezing.

• Modified various PLC based automated machinery to optimize operation and replacing older equipment

• Maintained plant HVAC and boiler system for better operation, Also monitor and control different Heating and cooling units for their optimized operation

• Modify and maintained RSVIEW ME based SCADA system for controlling different Weiler mixture, grinder and other system to produce different recipe product system

• Modify various controls for the water treatment plant to provide better solution using Allen Bradley PLC controls and ultrasonic sensors and power flex VFDs to control different pumps and solenoid

• Maintain and trouble shot Omron PLC based high speed packaging machine, high speed packaging robot using servos, Encoders, Sealers etc.

• Design safety circuits like safety for tow motor traffics, machine safety etc.

• Modified old machine by writing new programs for Allen Bradley PLCs, for the productive use by installing sensors, drives, modifying circuits for Quality and bulk production.

Label Ad Inc. Electrical-Automation Maintenance MAY”07 –APR”08

400, Cochrane Drive Markham, Ontario. L3R 8E3

• Modified Old packaging sealer machine with SLC100 with Micrologix1000 by developing a program routine and designing and wiring.

• Maintained and modified High speed packaging machine based on Siemens PLCs

• Design and installed, trouble shoot UV lighting system, automatic tension controller

Affinia Canada Corporation, Automation Technologist Feb” 05 - Mar” 07

[Automotive Industries] 244, Montrose Drive, Cambridge, Ontario

• Modified PLC programs for unavailability of parts to maintain productions & reduce downtime

• Designed new electrical drawing and rewired old machines as per the requirement and safety

• Trouble shoot high paced machines for electrical, Mechanical, Hydraulic & pneumatic problems

• Modified PLC programs, Electrical Wiring reduce the down time & to eliminate repetitive faults.

• Maintained and trouble shoot Electrical power presses & hydraulic presses and their servo feeders

• Used PLC program or encoder to realign machines or to set encoders to put their initial positions whenever they were out of alignment due to mechanical jamming.

• Calibrated Electrical Power presses for out of zero calibration or when encoder need to change

• Carried out regular Preventive maintenance for Electrical & Mechanical system of the machines

• Calibrated ABB robot system, programmed ABB robots for pick and place operations

• Design and installed servo feeder for the Hydraulic and Electrical Presses

• Calibrated automatic lube feeding system and install new lube feeding system for power presses, also maintained,turn tables, rollers, changing pumps, pneumatic and hydraulic parts repairing leaks, and other alignment problems regarding flow of parts to maintain continuity of supply

• Worked to maintain facility electrical supply, lighting systems, air lines etc.

Airwise Inc. Electrical Maintenance Sept” 02-Nov”04

[HVAC Unit Manufacturing] 2230, Bromsgrove Road, Mississauga. L5J 1L4

• Calibrated, installed and Maintained various temperature controllers (Honeywell) sensors, switches

• Calibrated and trouble shot different controls and regulator to obtain good climate control for the

Heating and cooling units for hospitals, schools etc.

• Wired Control Panels heating and cooling unit (For HVAC machines) according to Canadian electrical codes by deciding the sizes of wire gauges, fuse sizes, location of devices to optimize the space required, setting of the devices etc.

• Installed & trouble-shot Control Panels and wired it to the Damper motors, temperature controllers, Pressure switches, Humidity sensors, Lighting circuits, 3/1-Phase motors, AC/DC drives, Flame relays and other related components according to the blue print diagrams

• Used various wiring methods like, EMT, LIQUIDTIGHT, BX, RIGID, CABLES

Olympic Circuits Ltd, Industrial Electrician April”01-Aug”02

[Printed Circuit Board Mfg.] 3471B McNicoll Avenue, Toronto, M1V 4B8

• Installed and Modified program of various PLC for change of operation and machine modifications

• Repaired and Installed electric and electronic components such as motors, contactors, relays, timers, PLC’s, Motor controls and the sensors like proximity, Photo, limits etc.

• Installed and trouble shot AC, DC drives systems, Motors and other electronic circuits for the machines, Repaired and maintained Pneumatic circuits, control valves, solenoids etc.

Royal Electric Ltd. Electrical Engineer Oct’ 1994 – Jul’00

[Electrical & Automation Design] 1405, INDIA

• Consulted and negotiated with the clients to prepare specifications for the transformers, Explained proposals and presented reports of the projects

• Design the electrical system using Single line Diagram, Grounding layouts, electrical equipment layouts, motor control schematics, Cable layouts, Cable tray layouts, lighting layouts, area classification drawings and general plant layouts.

• Responsible for estimating costs, scheduling work, billing to the client, ordering supplies and equipment. Work out delivery and installation schedules for machines, switchgear, cables and fittings

• Technical working knowledge of low and medium voltage electrical power distribution systems, industrial

Motors/control, area classification wiring methods, emergency power systems, lighting systems, instrument control systems and low-medium voltage adjustable speed drives during commissioning.

• Prepared material cost and Timing estimates, reports and design specifications for the transformers and control panels,

• Carried out load flow analysis, short circuit analysis for distribution design.

• Designed Test Panel to carry out various tests on the power as well as on the distribution x’mers.

• Designed Control Panel for the new projects by selecting proper components to obtain optimum quality at low cost

• Prepared and modified electrical drawing using AutoCAD 2000 and Electrical Drawing Software See2000.

• Prepared ladder logic for the new project using Allen Bradley’s PLC

• Drafted and prepared Manuals in an easily understandable format for the new machines.

EDUCATION AND SPECIALIZED TRAINING

ADVANCE SERVO CONTROL USING AB CONTROL LOGIX 5000

& ULTRA 1394 DRIVE, GML COMMANDER

GEORGEBROWN COLLEGE, TORONTO 2007

PLC SYSTEM INTEGRATION, MACHINE VISION AND ROBOTICS, TORONTO

PLC123.COM 2005

ROBOTICS TRAINING (ABB, MOTOMAN), CENTENNIAL COLLEGE, TORONTO 2004

INDUSTRIAL HYDRAULICS, HUMBER COLLEGE, TORONTO 2004

PLC TRAINING, (AB PLC-2,PLC-5,SLC-500) RETS, TORONTO 2001

MASTER OF ELECTRICAL ENGINEERING (2 SEMESTER ) 2000

BACHELOR OF ELECTRICAL ENGINEER 1994

(Eligible to Register as Professional Engineer with APEGGA)

FIRE EXTINGUISHER AND SPILL MANAGEMENT TRAINING, CAMBRIDGE 2005

SAFETY AND LOCKOUT TRAINING, CAMBRIDGE 2005

MASTER ELECTRICIAN, ELECTRICAL SAFETY AUTHORITY 2007

CERTIFIED CONSTRUCTION & INDUSTRIAL ELECTRICIAN

Lift tow Training, Cambridge 2005

Fire Extinguisher and Spill Management Training, Cambridge 2005

Safety and lockout training, Cambridge 2005

C/C++ Programming (Sardar Patel University ) 1997

Oracle Developer2000 (Sardar Patel University ) 1998

Visual Basic and Other Web Oriented tools (S .P. University) 1998

REFERENCES

Available upon request

PROJECT WORK

• Modified Old packaging sealer machine with SLC100 with Micrologix1000 by developing a program routine and designing and wiring.

• Rewired and Reprogram, tapping machine for the filter inlet cap for automotive machine

• High Speed counter programming using Allen Bradley PLCs

• Analog IO scaling and programming using Allen Bradley PLCs

• Adaptive Conveyor sorter System for barcode marked items in PLC network, controlled by HMI with SCADA system.

• Programmed DDE exchange RSLinx to AB PLC in the network

• Programmed Batch process control User Interface for AB PLC Network using RSView32 SCADA system with DDE to RSLinx

• Programmed conveyor movement with VFD Leeson and AB PLC

• Programmed Barcode Scanner Metrologic for Barcode (Code 39, Interleave 2 of 5 various and fixed length) recognition. Established two-way ASCII communication to SLC 5103 with COM port configuration and ASCII string handling.

• Programmed conveyor -sorter application with database for barcode item sorting

• Programmed ServoDrive Baldor Flex + Drive 11 for Preset, Speed and PLC mode using interface and VB codes

• Developed Machine Vision applications (Cognex) with serial to PLC output for Bottle inspection, Text Recognition, Barcode Recognition, Measurements, Calibration

• Participated in debugging of packer (developed code for canister liner)

• Programmed Robot Motoman ERC and ABB S4C using teach pendant for pick and place operations

• Performed program changes in PLC Omron, Mitsubishi, GEFanuc and Siemens in various packaging and process equipment.

• Performed Machine building, installation, troubleshooting, debug, start-up

• Performed Plant equipment Maintenance with minimum supervision

• Developed Maintenance and User Manuals, AutoCAD Drawings and Bom

• Programmed and Modified existing Operator Panels: AB Panel View using PanelBuilder32, Omron using NT series software, EZtouch from Koyo

Contact this candidate