Experienced Instrumentation & Control Engineer with SIS/SIL focus

MICHAEL M SHEIDAEI, P.E., P.ENG

832-***-****, ***********@****.**

Core skills

Process Control, FEMA, SIS, SIL, LOPA, PHA, FGS, RCM, Life-Cycle Analysis, Reliability, Asset Management Systems, RCFA, Control Systems, Root Cause Failure Analysis, Data Mining for Fault Detection, SAP, Oracle, Chemical Analyzers, Electrical Power Distribution, Electrical Power Generation,, Gas Chromatography, Mass Spectrometry, Fire and Gas Systems, Instrumentation, Control Valves, Metering Station, FAT, SAT, Compressors, DCU, FCCU, HCU, De-Sulfurization, LNG, Ammonia, Urea, Ethylene, Poly-Ethylene, Amine Sweetening, CO2 Capture, Ethylene Oxide, Ethylene Glycol, P-Xylene, Green House Gas Technology, Tank Farms, Hot Pipeline, Cryogenic Pipeline, Reverse Osmosis Water Desalination, Win PCS, Robotics, Motion Control, PlantPax, Vision Systems, SPI, SP3D, Project Engineering, Project Management, Leadership, ISA Safety Committee voting member.

Education

PhD 2009, Petroleum Engineering, University of Alberta

MSc, 2005, Petroleum Engineering, University of Regina

MSc, 2000, Chemical Engineering, SUT

BSc, 1999, Chemical Engineering, Petroleum University of Technology

BSc, 1988, Mechanical Engineering, IUT

Professional qualifications/registration(s)

Professional Engineer Texas (132689), Professional Engineer Saskatchewan (12046)

Memberships/affiliations

ISA S84 committee

ISA 99 Committee

AIChE, AOPA, SPE, AGA

Employment history

Johnson & Johnson, Janus Surgical Hemostat Production Increase Project 03/2024~Now

I&C Engineer

Managed day to day project activities, manpower estimates, team supervision, acting as SME on DeltaV

Participated in conceptual engineering design and review (PFDs, preliminary P&IDs, Equipment List, Process Narrative, Instrument Index, DCS I/Os and requirements) and FEED including process safety management activities (Control Narrative, Cause and Effects, HAZOPS, risk assessments, PHAs, SIL calculations, MOCs, etc.) and +-20% budget including schedule and defined scope of the automation and connectivity for the project

Participated in post design FEED PHA/HAZOP/LOPA/SIL

Participated in SIS design, SIL determination, SIL verification, SRS, Proof Test Procedures, Functional Safety Assessment

Defined, developed, documented, and supported DCS regulatory control strategies for providing process stability and process safety.

Reviewed and evaluated the DCS hardware options, DeltaV and AB including packaged equipment selection criteria for I&C, Allen Bradley was selected

Reviewed the DCS migration plan to new building and managed the live plant

Created the re-wiring drawings for the interconnectivity during live operation including fiber optics and panels

Worked on moving the databases to new servers dedicated for Migration and relocating the existing servers to new building

Commissioned ed new Engineering Workstations and Operators Work Stations in new building and de-commissioned the old EWS and OWS and moved them to new building.

Lead engineer for automation on multiple DeltaV-controlled manufacturing suites, supporting upstream and downstream operations (bioreactors, chromatography skids, buffer prep, CIP/SIP).

Designed and implemented new batch recipes in DeltaV Batch Executive, ensuring full ISA-88 compliance.

Supported system upgrades from DeltaV v12 to v14, including virtualization, disaster recovery planning, and revalidation.

Collaborated with QA/Validation to author and execute FAT, SAT, and IQ/OQ protocols.

Provided troubleshooting and root cause analysis during manufacturing campaigns

Reviewed and implemented the Factory Test Plans and Site Test Plans, Validation Test Plans and documents for capital projects including SDLC and CSV

Created and managed project schedule, execution and vendor management including audits and quality assurance

Selected instrumentation and analytical Instrumentation

User Requirement Specification, Functional Specification and Detail Design Specification

Building Management System integration with DeltaV

Initiated plant power monitoring system

Orbia, St Gabril Lithium project 07/2023~02/2024

I&C department Manager, Electrical and I&C

Managing day to day department activities, manpower allocation, team supervision, acting as SME on multiple projects

Participated in Engineering design and review (PFDs, P&IDs, Equipment List, Process Narrative, etc) and Process Safety Management activities (Control Narrative, Cause and Effects, HAZOPS, risk assessments, PHAs, SIL calculations, MOCs, etc.)

Reviewed and modified the Hysys plant simulation

Participated in post design PHA/HAZOP/LOPA/SIL

Participated in PRV/PSV requirements and sizing/Selection based on Service (Steam, Subcritical Gas, Critical Gas, Blocked Liquid and Liquid Filled Vessel)

Participated in SIS design, SIL determination, SIL verification, SRS, Proof Test Procedures, Functional Safety Assessment

Defined, developed, documented, and supported DCS regulatory control strategies for providing process stability and process safety.

Defined scope of the automation and connectivity for the project along with cost and manhour estimates

Reviewed and evaluated the DCS hardware options, Honeywell/PlantPax/DeltaV and PlantPax was selected

Designed new control room and planned for moving existing control room to new building due to plant expansion

Package equipment selection criteria for I&C, Allen Bradley was selected

Created and managed project schedule, execution and vendor management including audits and quality assurance

Selected instrumentation and analytical Instrumentation

User Requirement Specification, Functional Specification and Detail Design Specification

Conceived, justified, designed, and commissioned new APC applications based on plant mass and energy balance with the help from operations and inferential product quality controls.

Worked closely with Operations, technical teams, and the economics and planning teams to define operating strategies and ensure their alignment with regulatory and APC controller strategies.

Configured DeltaV DCS for Lithium packaging lines, ensuring compliance with regulations.

Integrated DeltaV with external systems including PLCs, MES, and historian databases (OSI PI).

Implemented alarm rationalization and control strategy improvements, reducing nuisance alarms by 40%.

Authored requirement specifications (RS) and design specifications (FDS) for the new equipment integration projects.

Drafted plant Electrical Area Classification

Electrical Load List and Substation/MCC design

Developed plant distribution grid to reduce the capex and opex

Initiated advanced system protection plans for the plant

Initiated plant power monitoring system

Merck, Bioprocess Drug Substance Commercialization 03/2020 ~ 06/2023

Process Validation/Interim Electrical Engineering Director AB/DeltaV

Responsible for Digital Transformation, Data Integrity, Data Lake, utilizing PAS-X MES and Managing the Automation/Validation of project

Responsible for Middleware selection and implementation for Connected Instruments project

Responsible for SDLC of LabX, Smartline Data Cockpit and TetraSciences pipelines

Responsible for compliance with 21 CFR Parts 210, 211

Responsible for reviewing and approving the Management of Change and related documentation.

Reviewed and implemented the Factory Test Plans and Site Test Plans, Validation Test Plans and documents for capital projects including SDLC and CSV including authoring and executing FAT, SAT, and IQ/OQ protocols, ensuring compliance with FDA guidelines.

Responsible for defining scope of the automation and digitalization project along with cost and manhour estimates

Responsible for project schedule, execution and vendor management including audits and quality assurance

Management of Change for the projects along with Operations Tech and automation procedures to ensure cGMP compliance

Responsible for selecting instrumentation and analytical Instrumentation

User Requirement Specification, Functional Specification and Detail Design Specification

Instrument Selection and Specification

I/O list, DCS design, HMI graphics design and review, Alarm Management activities such as rationalization

Design and review of vendor submitted PLC/SCADA systems

Designed and programmed DeltaV control modules, equipment modules, and phases for bioreactors, chromatography skids, buffer prep, and CIP/SIP systems.

Developed and maintained batch recipes and campaign strategies in DeltaV Batch Executive to align with ISA-88 standards.

Built and customized DeltaV Operate graphics to provide intuitive HMI layouts for operators, improving usability and reducing operator errors.

Configured class-based control logic templates, enabling efficient reuse and reducing engineering hours by 20%.

Led system upgrade from DeltaV v12.3 to v14.3, including reprogramming legacy logic, testing batch functionality, and migrating to a virtualized server environment.

Integrated DeltaV with OSIsoft PI historian and MES systems, enabling automated data collection and electronic batch records.

Performed alarm rationalization, reconfigured alarm settings in DeltaV, and optimized interlocks for better process safety.

Acted as SME for automation during FDA inspections, addressing questions on DeltaV logic, security configuration, and audit trails.

Mentored junior engineers on best practices in DeltaV coding, phase design, and documentation.

Performed the Computer System Validation through Factory acceptance Testing

Performed the Installation Qualification (IQ), Operation Qualification (OQ), and Performance Qualification (PQ)

Performed the Building Electrical Load list and calculations

Designed new Building MCC/distribution/raceways, circuit breakers (dry 50KVA 13.8/4160/480)

Designed new substation, sized transformers based on load list

Designed lighting system

Drafted one-line diagrams

Redlined the power distribution drawings for additional modifications

Developed IT network and fire alarm systems

SNC-Lavalin, Lyondell-Bassell, Freeport, TX 07/2019 ~ 03/2020

I&E Engineer

Participated in Engineering, Turnaround, and PSM activities (HAZOPS, risk assessments, PHAs, MOCs, etc.)

Provide technical consultation, formal and informal training for process control applications.

Designed and reviewed Wiring and Cable Schedule

Instrument Datasheets, Loops, Wiring Diagrams

Created I/O list, DCS design, HMI graphics design and review, Alarm Management activities such as rationalization

Review of Sampling Systems/Analyzers provided by the vendors

Design and review of vendor submitted PLC/SCADA systems

Run calculations, specifying and ordering Instruments such as valves and pressure transmitters, and related equipment

Designed and drafted low power electrical equipment such as Switch gear, MCC, VFD

Attending the RE-PSM activities such as PHA/HAZOP/LOPA

Reviewed options for DCS upgrade between Honweywell and PlantPax

SGC Energia Juniper GTL Plant Pasadena, TX 11/2018 ~ 07/2019

Owner Engineer/Automation Project Manager, Electrical and I&C, DeltaV/AllenBradley

Participated in Engineering design and review (PFDs, P&IDs, Equipment List, Process Narrative, etc) and Process Safety Management activities (Control Narrative, Cause and Effects, HAZOPS, risk assessments, PHAs, SIL calculations, MOCs, etc.)

Reviewed and modified the Hysys plant simulation

Participated in post design PHA/HAZOP/LOPA/SIL

Participated in PRV/PSV requirements and sizing/Selection based on Service (Steam, Subcritical Gas, Critical Gas, Blocked Liquid and Liquid Filled Vessel)

Participated in SLC Activities, IPL selection, SIS design, SIL determination, SIL verification, SRS, Proof Test Procedures, Functional Safety Assessment

Participated in Operator Training Simulation development and reviewed the final version with Operations

Defined, developed, documented, and supported DCS regulatory control strategies for providing process stability and process safety.

Defined scope of the automation and digitalization project along with cost and manhour estimates

Created and managed project schedule, execution and vendor management including audits and quality assurance

Project MOC, Operations Tech and automation procedures to ensure cGMP compliance

Selected instrumentation and analytical Instrumentation

User Requirement Specification, Functional Specification and Detail Design Specification

Programmed and maintained DeltaV batch modules and phases for production formulation, and packaging operations.

Configured equipment control strategies in DeltaV to automate critical process functions such as temperature control, pressure control, flow loops, and sequence interlocks.

Developed and optimized DeltaV graphics and alarm displays, streamlining operator interaction with cleanroom filling lines.

Designed custom logic and parameter sets for batch reporting and integrated them with OSI PI and LIMS systems.

Supported a major facility expansion by writing functional design specifications (FDS) and implementing automation code for new unit operations.

Participated in DeltaV security administration, ensuring compliance with 21 CFR Part 11 electronic records and audit trail requirements.

Led troubleshooting of complex automation issues, using DeltaV Event Chronicle and diagnostics to identify root causes and implement long-term fixes.

Contributed to a DeltaV migration project, testing and validating new control strategies and updating associated documentation.

Supported regulatory audits, providing detailed walkthroughs of batch recipe logic, change control processes, and system access management.

Hydraulic Calculations, Line Size calculations and Control Valve sizing

Heat Exchanger, Pressure Vessels and rotating equipment design and calculations

Provide technical consultation, formal and informal training for process control applications.

Conceived, justified, designed, and commissioned new APC applications based on plant mass and energy balance with the help from operations and inferential product quality controls.

Worked closely with Operations, technical teams, and the economics and planning teams to define operating strategies and ensure their alignment with regulatory and APC controller strategies.

Maintained existing APC applications and performed audits of APC application’s benefits.

Developed Equipment Procedures for SMR, Syngas Compressor Operations, Catalysis Unit

Developed Plant Standard Operating Procedures

Designed and reviewed Wiring and Cable Schedule

Instrument Datasheets, Loops, Wiring Diagrams

Created I/O list, DCS design, HMI graphics design and review, Alarm Management activities such as rationalization and alarm help

Design and review of vendor provided Sampling Systems/Analyzers: TOC, Sulphur, GC, IR, Oil in water using Ultraviolet

BMS and operation-state plans for Steam Methane Reformer

Design and review of vendor submitted PLC/SCADA systems

Design and implementation of Asset Management Systems

Developed Critical Asset List and Spare Parts

Specifying and ordering Instruments, equipment and electrical equipment such as Switch gear, MCC, VFD and drafted one-line diagrams

Design Change and Project Change Requests

Commissioning and Startup activities

Performed the overall Electrical Load list and calculations

Designed plant MCC/distribution/raceways, circuit breakers (dry 50KVA 13.8/4160/480)

Designed new substation, sized transformers based on load list

Designed lighting system

Redlined the power distribution drawings for additional modifications

IDE Americas Santa Barbara Water Desalination Project, PlantPax Santa Barba, CA 04/2018 ~ 11/2018

Participated in Engineering design and review (PFDs, P&IDs, Equipment List, Process Narrative, etc) and Process Safety Management activities (Control Narrative, Cause and Effects, HAZOPS, risk assessments, PHAs, SIL calculations, MOCs, SIS design, SIL determination, verification and SRS, proof test procedures etc.)

Developed Critical Asset List and Spare Parts

Developed Equipment Procedures for Reverse Osmosis Units and related equipment

Developed Standard Operation Procedures for Plant

Design and review of Wiring and Cable Schedule

Instrument Datasheets

Design and review of vendor submitted PLC/SCADA systems

Performed plant Electrical Load list and calculations

Designed MCC/distribution/raceways, circuit breakers (dry 50KVA 13.8/4160/480)

Designed new substation, sized transformers based on load list

Designed lighting system

Drafted one-line diagrams

Redlined the power distribution drawings for additional modifications

Sampling Systems/Analyzers: Turbidity, PH, Cl2, Salinity

Specifying and ordering Instruments, equipment

Drafted one-line diagrams

Design and implementation of Asset Management Systems for E&I

Design Change and Project Change Requests

Commissioning and Startup

PINNACLE CDP EXPANSION and STABILIZER Project – Houston, TX

05/2018 ~ 08/2018

Senior Control Systems Engineer,

Created the Remote I/O list including JB loading

Pipeline and Truck LACT instrumentation and integration to central PLC

Reviewed and modified the P&IDs to comply with codes and standards and HAZOP outcomes

Review of Compressor skid instrumentation and Mark Vie controls

Design and review of Wiring and Cable Schedule

Smart Plant Intools for datasheets and wiring

Sampling Systems / Analyzers: Analyzer Packages for H2S, N2, C1+, Oil in Water

Instrument Datasheets

Design and review of vendor submitted PLC/SCADA systems

Drafted one-line diagrams

Spare Parts list based on Asset Criticality

DeltaV/AB/Modicon/DeltaV SIS

Enerflex Steamboat NGL Project – Houston, TX

05/2018 ~ 08/2018

Senior Control Systems Engineer,

Created the Remote I/O list including JB loading

Pipeline and Truck LACT instrumentation and integration to central PLC

Reviewed and modified the P&IDs

Compressor skid review

Sampling Systems / Analyzers: Analyzer Packages for H2S, N2, C1+, Oil in Water

All datasheets were created utilizing SmartPlant Intools

Asset Criticality Index

Design and review of Wiring and Cable Schedule

Instrument Datasheets

PLC/SCADA systems including Radio 11GHz and 900 MHz

Created Electrical Line List and Load List and Participated in MCC/VFD design

Designed and drafted one-line diagrams

DeltaV/AB/Modicon/DeltaV SIS

Phillips 66 – Wood River, Il,

11/2017 ~ 04/2018

Lead I&E Engineer r, Turn Around, Distilling West

Created the TA area checklists for Control Systems, managed the daily TA activities

Reviewed and modified the Safety Manager shutdown hierarchy VS Cause & Effects

Review and modification of Asset List and criticality VS SIS

Writing and editing complex DCS and PLC programs

SmartPlant Intools/Electrical

ExSILentia

Re-HAZOP, Review of SIFs for Calculation and verification

HMI modification, review and SAT

Review of replacement gas compressor and integration of new PLC into C300

Troubleshooting PLC hardware

Reviewed emergency power and shutdown for turnaround

Honeywell C300/AB/SafetyManager

Jacobs, Shell, DeltaV/AllenBradley– Martinez, CA

05/2017 ~ 11/2017

Lead Control Systems Engineer, Margin Improvement Project

Performed the design optimization for Main fractionator with Process

Conducted Engineering and Cost benefit analysis to replace the instrumentation, Saved 1.5 $MM for Client

Increased safety by review of P&IDs and new SIS design for the project

Replaced old fashioned instrumentation with Smart type for lower cost

Replaced all PLC within scope with AB and programmed 15% of them

Honeywell C300/AB/Triconex

AkzoNobel, Yokogawa, Pasadena,

01/2017 ~ 05/2017

Project Manager/Control Systems

Managed 73 small capital and maintenance projects

Created Asset List and Spare Parts List

Reviewed Failure Data and recommended instruments to ch

Introduced bidding process to the plant for Projects, Reduced costs of projects 25 to 70%

Managed a group of 24 contractors to perform the projects

Managed DCS migration from PLC to DeltaV and relocation

PSM, SLC, SIS design and review

Performed the new cold storage Building Electrical Load list and calculations

Designed new cold storage Building MCC/distribution/raceways, circuit breakers (dry 50KVA 13.8/4160/480)

Designed new substation, sized transformers based on load list

Designed lighting system

Drafted one-line diagrams

Redlined the power distribution drawings for additional modifications

DeltaV/AB/Modicon/DeltaV SIS

Cameron LNG, Hackberry, LA

06/2015 ~ 12/2016

Chief Engineer

Managed 110 Engineers and Specialists, FEED through completion of Detailed Engineering

Conducted Engineering Analysis of DeltaV DCS and reduced size and cost of RIE and DCS by 6%

Series 7 GE Natural Gas Compressors

Asset Integrity Study

Asset Management Establishment

Spare part list based on Asset Criticality and Asset Integrity

ExSILentia

Sampling Systems / Analyzers:

Siemens Natural Gas compressors

Metering Skid Instrumentation and RTU

Increased safety by improved Fire & Gas equipment and SLC including HAZOP/LOPA/SIS

DCS, SIS, FGS, PLC HMI, Alarm Management, Historian

DeltaV/AB/DeltaV SIS

AMEC Foster Wheeler, Houston, TX

09/2014 ~ 06/2015

Lead I&E Engineer

DOW Ethylene Poly-Ethylene

oDeveloped Scope of work and budget for Vibration Monitoring System upgrade

oDeveloped the scope of work, budget, man hour requirements for Instrumentation upgrade

oRe-Programming for DCS upgrade to ABB 800xA

oHistorian, Alarm management

oResponsible for all the electrical engineering work

TUPRAS RUP, Responsible for all the electrical engineering workTurkey, Commissioning/APC Manager, 11/2014 ~ 05/2015,

oLed a team of 35 operators and engineers

oDetailed review and planning of commissioning activities for Gas Compressors

oResponsible for all the electrical engineering work

oTroubleshooting PLC’s and DCS with vendor support to ensure safe and optimal operation of critical equipment

oReviewed the sizing of equipment and instrumentation and performed the commissioning

DUQM, Sultanate of Oman

oReviewed P&ID’s

oValve and instrument calculations, sizing and selection

oMan-Hour estimates, MTO’s, Engineering and Construction Schedule

oHMI design

oDCS/PLC Engineering

oAsset lists

oAsset Management

oMOC

Honeywell C300/Siemens/Triconex\ ABB 800xA

Owner’s Engineer, DeltaV/AB/DeltaV SIS

CH2M HILL, Houston, TX

08/2013 ~ 09/2014

Owner’s Project Engineer/Lead I&E Engineer

BP, Brazil Ligno-Cellulitic Project Engineer, 07/2013 ~ 09/201Honeywell C300/Triconex

o

CP Chem, Pasadena, Project Engineering Manager, 03/2014 ~ 09/2014 Honeywell C300/AB

BASF Freeport, Project Engineer, FEED, (Poly-Ethylene Project), 2014, FEED, Honeywell C300

DYNO-NOBEL CHEMICAL, Owner's Engineer, Ammonia Compressors 07/2013 ~ 09/2014-Owner’s Engineer, Centum/AB/ProSafe-RS

Jacobs Engineering, Houston, TX

08/2012 ~ 08/2013

Lead SIS/I&E

CHEVRON PHILLIPS, Beaumont, Project Engineer, 02/2013 ~ 06/2013-Owner’s Engineer, Honeywell C300/AB/Triconex

TPC, Bay Town, Project Engineer, 11/2012~06/2013, DeltaV/DeltaV SIS

MOTIVA - Port Arthur, Lead Control System Engineer, 08/2012 ~ 11/2012, -Owner’s Engineer, Honeywell C200,300/AB/Triconex

Suncor, Fort McMurray, AB

02/2012 ~ 08/2013

Lead Control Systems Engineer

Owner’s Engineer, DeltaV/AB/DeltaV SIS

Hatch, Calgary, AB

08/2011 ~ 02/2012

Senior I&E Engineer

N-Solv, FEED, Lead I&C Engineer, Confidential, 2011

GASCO, Habshan Sulphur Granulation Plant Abu Dhabi, UAE, Construction and commissioning Manager

Vale INCO, Long Harbor Nickel Smelting Plant - Vancouver, BC. Canada

08/2010 ~ 08/2011

Senior Control Systems Engineer

Single Buoy Mooring, Chevron FPSO, Brazil

01/2009 ~ 08/2010

Senior Control Systems Engineer

Siemens Series 7 PLC

Suncor, FortMac, AB / Toronto, ON

01/2005 ~ 12/2008

Control System/Construction Engineer

design and reviewing using SmartPlant Instrumentation or SPI,

checking and correcting the drawings and indexes for pre-commissioning and commissioning and as-built

designing the process control and implementing the strategies and running instrument related calculations and design which include boiler,

heater and furnace controls, selection of analyzers and CEMS, selection of instruments,

wiring diagrams and loop drawings, junction box drawings,

writing up the control narratives and DCS programming of designed narratives and SIL validation, Re-HAZOP, SIL calculations, SRS,

Reverse engineering of PLC’s including logic, programming, troubleshooting, repairing and maintaining,

P&ID reviews and corrections, material requisition, site assignment for commissioning, walk down the P&IDs and identification of instrumentation and proper installation, providing technical expertise to Suncor regarding Instrumentation and Control Systems, review of instrumentation wiring, reviewing the P&IDs for Interlocks and Safety Systems, review of Cause and Effect Matrixes and Control Narratives with control Philosophy, review of vendor provided information,

DCS programing Modifications, monitoring Start-up and ensuring the safety and functionality of instrumentation, DCS/SIS/FGS Systems, Witness E&l testing and commissioning activities and sign off check sheets and documentation

PanCanadian, Regina, SK

01/2003 ~ 12/2004

Operations Engineer;

Weyburn CO2 Miscible Flooding - Confidential work on CO2 assisted water flooding, and water assisted CO2/CH4 flooding, responsibilities included SCADA system, pipeline simulation, HMI, Analyzers, Pipeline Compression Facilities, Metering Stations, Well control Systems, ESD systems, 200 KM pipeline including booster stations

AB

JV, Regina, SK

11/2000 ~ 12/2002

Project Engineer

Engineer, Solvent Assisted Gravity Drainage - Confidential work on solvent assisted gravity drainage of heavy oil.

Engineer, Heavy Oil Water Flooding Scoping Study - Confidential work on heavy oil water flooding scoping study

SUT, Tehran Tehran

07/1999 ~ 12/2000

Research Engineer;

Artificial Intelligence, Neural Network Control of Refinery Towers

PUT, Ahwaz Khozestan

08/1996 ~ 06/1999

Research Engineer;

Environmental Aspects of Oil and Gas production, Waterflooding process and effects of salinity

Applications, Programming

Microsoft Office (including Macros), Microsoft Projects, SAP, Oracle, SmarPlant® Intools, SmartPlant® Electrical, Fanuc Robotics HandlingTool I&II, Fanuc Robotics Visiloc Vision Systems, Fanuc Robotics KAREL Programming Language, Fanuc Robotics PalletTool, Fanuc Robotics FAPT Ladder, Fanuc Robotics DCS (Dual Channel Safety), DVT Vision System Programming, AutoMOD Simulation Software, KUKA Robotics KRL 1 Programming, AB/RS FactoryTalkView Studio Programming, Wonderware InTouch Programming, RTP NetArrays PLC Programming, Masoneilan Valve Engineering, Fisher Valve Engineering I & II, Flowserve Valve Engineering, Fanuc Robotics ROBOGuide, Invensys Tristation 1131 Intermediate Programming, Modicon PLC Programming (MSW, Proworx, UnityXL), Endress + Hauser Radar and Wireless Technology, Emerson Wireless Technology, Risk Assessment, Visual Basic, C++ Programming, Cisco Networking, AB RS Logix PLC Programming, Rockwell Software RSView32, Ni LABVIEW (underway), SolidWorks (underway)

Contact this candidate