Class A Driver with DoD Aircraft Experience
Resume:
Scott Allan Harger
Edmond, OK 73034 US
Mobile Phone: 405-***-****
Email: **********@*****.***
Country of Citizenship: United States of America
Veterans’ Preference: Yes / 10 Point
Highest Grade: WG-11 Step 5
Education: *Completed 160 Hours of comprehensive training in commercial driving and safety regulations.
*Graduate of 160 Driving Academy
Licenses: CDL Class A / Endorsement T
Availability: Job Type: Permanent, Temporary
Work Schedule: Full or Part Time
Work Experience Schneider National
10/2025-01/2026
3101 South Packerland Dr. Hours per week: 70
Green Bay WI.54313
Class A Tractor Trailer Driver
Supervisor: Miesha Jones (1-800-***-****)
Okay to contact Supervisor: Yes
Effectively Operated Automatic Tractor With 53Ft Trailer
Drop and Hook Trailers. Delivered in All Areas of Eastern United States
Complied with Post and Pre-Trip Inspections on Tractor Trailer
Work Experience: Madison Turf Farms
07/2025-09/2025
Spencer Office Hours per week: 45
7000 N Midwest Blvd
Jones, OK 73049
Class A Tractor Trailer Driver
Supervisor: Tommy Horton 580-***-****)
Okay to contact Supervisor: Yes
Effectively Operated 15 speed Tractor With 50Ft Trailer and Attached Mule
Loaded/Unloaded with three wheeled lift truck and Secured Large Rolls/Pallets of Sod Secured by cargo strapping. Calculated load distribution according to weight.
Delivered in All Areas of Oklahoma to New Construction Developments
Complied with Post and Pre-Trip Inspections on Tractor Trailer
Work Experience: U.S.A.F. Department of Defense
10/2011-08/2022 (Retired)
Tinker A.F.B. WG11, Step 5
3001 Staff Drive Hours per week: 40
Oklahoma City, OK 73145
Aircraft Engine Repairer / Inspector
Supervisor: Andrew Barry 405-***-****)
Okay to contact Supervisor: Yes
●Effectively disassemble, inspect, install, assemble, perform hydraulic/oil pressure and flow checks and troubleshoot any defects that may occur i.e.(If a low or high flow rate occurs I start looking for erratic spray patterns and isolate the problem nozzle or nozzles and replace as necessary to achieve satisfactory flow rate).
●Interacted with customers’ final product with 100% satisfaction.
●Established estimated time production of each gear box would take from cradle to grave to produce end of month quota needed for customer.
●Utilized ton up to 5 ton pneumatic, electric and manual overhead cranes on daily basis.
●Operated 5 to 15K forklifts off and onloading tractor trailers, transporting material pallets, and stocking surplus warehouse shelving daily.
●Fulfilling the logistics behind receiving, processing and storing inventory according to purchase orders and store policy, also ensure that shipping schedules are met with attention to detail to ensure timely delivery and loss prevention.
●Maintained the Technical Order Library by updating changes, safety supplements, operational supplements and A-paging entire library.
●Certified on (F108, F101, F110, F118) Transfer, Inlet and Accessory Gearboxes.
●Worked closely with process engineering testing new qualifications of tooling developed by our research and development shops.i.e. (Worked with process engineering in testing newly made tooling for the backlash and tooth pattern checks on the F108 Transfer Gearbox. I discovered several errors with the thickness of the pre-shimming tooling, which lead to the changing of blueprints by the engineer and submitted several 202’s to change the procedures in the technical order).
●I adhere to and follow all safety regulations associated with my everyday duties. i.e.(I follow the guidelines given in the safety data sheets to effectively use the proper personal protective equipment that is required for dealing with that specific chemical).
●I comprehend blueprints, schematics and follow all technical orders to the letter.
●Supervised and mentored several employees.
U.S.A.F. Department of Defense 06/2010-10/2011
Tinker A.F.B. WG9, Step 5
3001 Staff Drive Hours per week: 40
Oklahoma City, OK 73145
Jet Engine Mechanic
Supervisor: Rodney Galloway 405-***-****)
Okay to contact Supervisor: Yes
●Disassemble, Inspect, assemble, troubleshoot and pressure check F100-220 engine cores.
●Utilized ton up to 5 ton pneumatic, electric and manual overhead cranes on daily basis.
●Operated 5 to 15K forklifts off and onloading tractor trailers, transporting material pallets, and stocking surplus warehouse shelving daily.
●Interacted with customers’ final product with 100% satisfaction.
●Disassemble, Inspect, assemble, troubleshoot and pressure check F100-229 engine cores.
● Disassemble, Inspect, assemble, troubleshoot and pressure check F100-220E engine cores.
●Maintained Technical Order Library by updating changes, safety supplements, operational supplements and A-paging entire library.
● Interpret technical orders, blueprints, schematics, troubleshooting charts and all safety regulations.
LCCC 10/2008-06/2010
Lorain County Community College Student
1005 N Abbe Rd, Elyria, OH 44035 Hours per week: 30
Student
Supervisor: Professor 440-***-****)
Okay to contact this Supervisor: Contact me first
● I studied courses to obtain a degree in Physical Therapy field.
Tow lift, Inc. 05/2007-10/2008
1395 Valley Belt Rd. Grade: N/A
Brooklyn Heights, OH 44131 Hours per week: 45
Field Service Forklift Technician
Supervisor: Lee Napier 216-***-****)
Okay to contact this Supervisor: Yes
I managed and maintained my fleet vehicle to make timely and effect maintenance service calls to troubleshoot numerous malfunctions on diesel, electric and LPG lifts. Operated 5 to 15K forklifts electric and hydraulic pallet jacks off and onloading tractor trailers, transporting material pallets, and stocking surplus warehouse shelving daily.
Pick-up and transported forklifts on flatbed truck with air brakes.
Interacted with customers’ final product with 100% satisfaction.
Performed MIG and stick welding, using cutting torches to replace and retrofit parts into place and to patch equipment with new steel.
Perform operational and functional checks after repairing the lift.
● Interpret schematics and blueprints daily as part of my troubleshooting.
skills to remedy the malfunctions encountered.
●Performed periodically scheduled maintenance in accordance with work cards.
●Overhauled diesel, LPG and electric lift engines in accordance with manufacture manuals.
Kurtz Bros. Inc. 05/2006-04/2007
950 Valley Belt Rd. Grade: N/A
Brooklyn Heights, OH 44131 Hours per week: 50
Heavy Equipment Mechanic
Supervisor: Mike Carey 216-***-****)
Okay to contact this Supervisor: Yes
●Operated, installed, removed, troubleshot, tested, and operationally checked all machines functional systems associated with the (gas and diesel) engines, hydraulic driven pumps, drives, gearboxes, valves, axles, brakes, transmissions, electrical harness wiring, and the sub-systems either on the job site or in the shop.
●Drove flatbed supply delivery truck with air brakes and interacted with customers’ final product with 100% satisfaction.
Performed MIG and stick welding, using cutting torches to replace and retrofit parts into place and to patch equipment with new steel.
●Performed time-scheduled inspections and operated such machines as (front loaders, skid-steers, electric/ propane/diesel forklifts, excavators, mobile cranes and gradalls w/air brakes daily.
●Daily maintenance would involve welding repairs, fluid & filter changes, and general grease lubrication points.
●Interpret schematics and troubleshooting charts to figure out the proper technique to fix the problem, also interpret Technical Manuals, Maintenance Guides, and work cards to ensure all the proper steps are completed for the task at hand.
●Tools used would be standard/metric/ and specially designed wrenches, feeler gauges-(measures gaps and tolerances), multimeters-(voltage checks, continuity, resistance checks).
Mirage Stables 02/2003-05/2006
3948 Tallmadge Rd Grade: N/A
Rootstown, OH 44272 Hours per week: 40
Asst. Manager
Supervisor: Valerie Myers 234-***-****)
Okay to contact this Supervisor: Yes
●Maintain diet, exercise, and overall health of thoroughbred horses. -Sort, file, and maintain billing statements.
●Operated skid steers and front-loading tractors daily.
●Use Microsoft Word, Office, Excel, and the Internet daily to maintain medical records of racehorses.
Lowe’s Home Improvement 12/2002-12/2003
1000 W. Arbrook Blvd. Grade: N/A
Arlington, TX 76015 Hours per week: 40
Receiving / Material Handler
Supervisor: Quincey Cook 817-***-****)
Okay to contact this Supervisor: Yes
●Operated 5 to 15K forklifts on and off-loading tractor trailers, transporting material pallets and stocking surplus warehouse shelving.
●Drove flatbed supply delivery truck with air brakes.
●Delivered final product to customer with 100% satisfaction.
●Scan and verify all items with LRT gun against packing list and cross in the computer
System.
●Fulfilling the logistics behind receiving, processing and storing inventory according to purchase orders and store policy, also ensure that shipping schedules are met with attention to detail to ensure timely delivery and loss prevention.
●Qualified in operating electric tug/pallet jack, order picker lift, and narrow aisle extension lift.
U.S.A.F. ANG 06/2001-08/2002
Carswell J.R.B. WG10, Step 5
Fort Worth, TX 76127 Hours per week: 40
Jet Engine Mechanic
Supervisor: Arnold Florez 817-***-****)
Okay to contact Supervisor: Yes
●Skills involve the installation, removal, inspection, troubleshooting, testing, build-up & tear-down, and operational run checks of all aircraft systems associated with the engines, propellers, GTC, and APU systems and subsystems. These skills took place on the flight-line, at the test-cell, or in-shop and would involve hydraulic, fuel, oil, and pneumatic accessories i.e. (fuel control, pumps, strainers & filters, starters, gearboxes, compressors, turbines, valve & pump housings, and all associated components).
●Maintained Technical Order Library by updating changes, safety supplements, operational supplements and A-paging entire library.
●Utilized ton up to 5 ton pneumatic, electric and manual overhead cranes on daily basis.
●Operated 5 to 15K forklifts on and off-loading tractor trailers, installing jet engines on aircraft transporting material pallets and stocking surplus warehouse shelving.
●Interpret schematics, follow process procedures, troubleshooting charts to figure out the proper technique to fix the problem. I also interpret Technical Manuals, Maintenance Guides, and work cards to ensure all the proper steps are completed for the task at hand.
●Performed propeller dynamic balancing of propellers at Test Cell and on the flight- line using a vibration analyzer and several well-placed accelerometers.
●Performed adjustments of engines @ Test Cell and on the flight line i,e,(Having an engine which will not reach maximum temperature inlet temperature when temperature datum valve is in the auto position we would get the temperature datum amplifier tester, hook it to the engine and adjust the pots on the back of the amplifier to the correct settings to obtain desired temperature inlet temperature or in straight jet engines the exhaust gas temperature).
●Perform full military power run-ups @Test Cell or on the flight to evaluate engine performance and change or adjust any components that are suspect in hindering engine’s performance i.e.(Changing out a bleed air anti-ice valve that may be stuck open in the fail condition).
●Taxi Certified, Engine Test Cell Certified on the-16 test cell and the 21A test cell engine run certified to full military power.
U.S.A.F. 07/1989-08/1991
Pope A.F.B. E2-E4
Fayetteville, NC 28308 Hours per week: 40
Security Force Police Specialist
Supervisor: TSGT John O’Quin 910-***-****
Okay to contact supervisor: Yes
Physical Security Support: monitors and responds to alarms; traces access patterns, programming, assigns or removes user permissions, and remotely opens and secures doors during routine and emergency operations; determines when to dispatch law enforcement or other personnel to investigate; maintains radio/alarm activity records/logs to include dates, times, and results of communications and activities; prepares completed reports; issues and retrieves government issued keys and/or identification cards; and maintains accountability of Police Officer badges issued and all associated logs.
Communications: monitors and receives routine and emergency calls from a variety of sources that need police, fire, medical or other emergency services; maintains contact with law enforcement units; monitors and directs responses to security and life safety communications, radio dispatches, telephone calls, and other emergency communication circuits; coordinates with various federal, state and local law enforcement officials for coordination of emergency situations; and operates a variety of communications equipment, telephones and computer systems to support both routine and emergency operations.
Operations Support: performs system checks on a variety of equipment used in the dispatch center; troubleshoots systems when problems arise and resolves issues whenever possible; conducts equipment inventories and completes records and other logs; enters, updates and retrieves information from a variety of computer systems/databases; uses state and the National Crime Information Computer (NCIC) to access sensitive law enforcement information to support field operations and investigations; enters or updates regional and national records; compiles and prepares reports related to events occurring in the operation of the police control center; completes vehicle registration tasks and issues decals and permits.
Performs other related duties as assigned.
Contact this candidate